• There are no items in your cart

ASTM B 209M : 2014 : REDLINE

Current
Current

The latest, up-to-date edition.

Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
Available format(s)

PDF

Language(s)

English

Published date

11-01-2014

CONTAINED IN VOL. 02.02, 2014 Defines aluminum and aluminum alloy flat sheet, coiled sheet, and plate in the alloys and tempers.

1.1This specification covers aluminum and aluminum alloy flat sheet, coiled sheet, and plate in the alloys (Note 1) and tempers shown in Tables 2 and 4, and in the following finishes:

(A)Limits are in mass percent maximum unless shown as a range or stated otherwise.
(B)Analysis shall be made for the elements for which limits are shown in this table.
(C)For purposes of determining conformance to these limits, an observed value or a calculated value attained from analysis shall be rounded to the nearest unit in the last right hand place of figures used in expressing the specified limit, in accordance with the Rounding Method of Practice E29.
(D)Others includes listed elements for which no specific limit is shown as well as unlisted metallic elements. The producer may analyze samples for trace elements not specified in the specification. However, such analysis is not required and may not cover all metallic Others elements. Should any analysis by the producer or the purchaser establish that an Others element exceeds the limit of Each or that the aggregate of several Others elements exceeds the limit of Total, the material shall be considered non-conforming. The Total for Other Elements does not include elements shown in the footnotes with specific composition limits.
(E) Other Elements—Total shall be the sum of unspecified metallic elements 0.010 % or more, rounded to the second decimal before determining the sum.
(F)Vanadium 0.05 max. The total for other elements does not include vanadium.
(G)The aluminum content shall be calculated by subtracting from 100.00 % the sum of all metallic elements present in amounts of 0.010 % or more each, rounded to the second decimal before determining the sum.
(H)Composition of cladding alloy as applied during the course of manufacture. Samples from finished sheet or plate shall not be required to conform to these limits.
(I)Vanadium, 0.05–0.15, zirconium, 0.10–0.25.
(J)0.05–0.25 Zr.
(K)Gallium 0.03 max, vanadium 0.05 max.
(L)0.10–0.6 Mn + Cr.
(M)In case there is a discrepancy in the values listed in Table 1 with those listed in the “International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys” (known as the “Teal Sheets”), the composition limits registered with the Aluminum Association and published in the “Teal Sheets” shall be considered the controlling composition. The “Teal Sheets” are available at http://www.aluminum.org/tealsheets.
(A)To determine conformance to this specification, each value for tensile strength and for yield strength shall be rounded to the nearest 1 MPa and each value for elongation to the nearest 0.5 %, both in accordance with the Rounding Method of Practice E29.
(B)The basis for establishment of mechanical property limits is shown in Annex A1.
(C)Elongations in 50 mm apply for thicknesses up through 12.50 mm and in 5× diameter for thicknesses over 12.50 mm.
(D)Materials in either of these tempers, (H32 or H22), (H34 or H24), (H36 or H26), (H38 or H28), (H12 or H22), (H14 or H24), (H16 or H26), (H18 or H28), may be supplied at the option of the supplier, unless one is specifically excluded by the contract or purchase order. When ordered as H2X tempers, the maximum tensile strength and minimum yield strength do not apply. When H2X tempers are supplied instead of ordered H1X or H3X tempers, the supplied H2X temper material shall meet the respective H1X or H3X temper tensile property limits.
(E)Tests of F temper plate for tensile properties are not required.
(F)The tension test specimen from plate over 12.50 mm in thickness is machined from the core and does not include the cladding alloy.
(G)This material is subject to some recrystallization and an attendant loss of brightness.

Alloy

Temper

Specified Thickness,
mm

Axis of
Test Specimen

Tensile Strength,
MPa

Yield Strength
(0.2 % offset), MPa

Elongation,C
min, %

over

through

min

max

min

max

in 50 mm

in 5× 
Diameter

2124

T851E

 25.00

 50.00

longitudinal

455

...

395

...

...

5

2124

T851E

long transverse

455

...

395

...

...

4

2124

T851E

short transverse

440J

...

380J

...

...

1

2124

T851E

 50.00

 80.00

longitudinal

450

...

395

...

...

5

2124

T851E

long transverse

450

...

395

...

...

3

2124

T851E

short transverse

435

...

380

...

...

1

2124

T851E

 80.00

100.00

longitudinal

450

...

385

...

...

4

2124

T851E

long transverse

450

...

385

...

...

3

2124

T851E

short transverse

425

...

370

...

...

1

2124

T851E

100.00

130.00

longitudinal

440

...

380

...

...

4

2124

T851E

long transverse

440

...

380

...

...

3

2124

T851E

short transverse

420

...

365

...

...

1

2124

T851E

130.00

150.00

longitudinal

435

...

370

...

...

4

2124

T851E

long transverse

435

...

370

...

...

3

2124

T851E

short transverse

400

...

350

...

...

1

Alloy

Temper

Specified Thickness,
mm

Tensile Strength,
MPa

Yield Strength
(0.2 % offset), MPa

Elongation,C
min, %

over

through

min

max

min

max

in 50 mm

in 5× 
Diameter

2219

O

0.50

12.50

...

220

...

110

12

...

2219

O

12.50

50.00

...

220

...

110

...

10

2219

T31K (flat sheet)

0.50

1.00

315

...

200

...

 8

...

2219

T31K (flat sheet)

1.00

6.30

315

...

195

...

10

...

2219

T351E,H plate
(formerly T31 plate)

6.30

12.50

315

...

195

...

10

...

2219

T351E,H plate
(formerly T31 plate)

12.50

50.00

315

...

195

...

...

 9

2219

T351E,H plate
(formerly T31 plate)

50.00

80.00

305

...

195

...

...

 9

2219

T351E,H plate
(formerly T31 plate)

80.00

100.00

290

...

185

...

...

 8

2219

T351E,H plate
(formerly T31 plate)

100.00

130.00

275

...

180

...

...

 8

2219

T351E,H plate
(formerly T31 plate)

130.00

150.00

270

...

170

...

...

 7

2219

T37K

0.50

1.00

340

...

260

...

 6

...

2219

T37K

1.00

12.50

340

...

255

...

 6

...

2219

T37K

12.50

60.00

340

...

255

...

...

 5

2219

T37K

60.00

80.00

325

...

250

...

...

 5

2219

T37K

80.00

100.00

310

...

240

...

...

 4

2219

T37K

100.00

120.00

295

...

235

...

...

 3

2219

T62F

0.50

1.00

370

...

250

...

 6

...

2219

T62F

1.00

6.30

370

...

250

...

 7

...

2219

T62F

6.30

12.50

370

...

250

...

 8

...

2219

T62F

12.50

25.00

370

...

250

...

...

 7

2219

T62F

25.00

50.00

370

...

250

...

...

 6

2219

T81 sheet

0.50

1.00

425

...

315

...

 6

...

2219

T81 sheet

1.00

6.30

425

...

315

...

 7

...

2219

T851E
(formerly T81 plate)

6.30

12.50

425

...

315

...

 8

...

2219

T851E
(formerly T81 plate)

12.50

25.00

425

...

315

...

...

 7

2219

T851E
(formerly T81 plate)

25.00

50.00

425

...

315

...

...

 6

2219

T851E
(formerly T81 plate)

50.00

80.00

425

...

310

...

...

 5

2219

T851E
(formerly T81 plate)

80.00

100.00

415

...

305

...

...

 4

2219

T851E
(formerly T81 plate)

100.00

130.00

405

...

295

...

...

 4

2219

T851E
(formerly T81 plate)

130.00

150.00

395

...

290

...

...

 3

2219

T87

0.50

1.00

440

...

360

...

 5

...

2219

T87

1.00

6.30

440

...

360

...

 6

...

2219

T87

6.30

12.50

440

...

350

...

 7

...

2219

T87

12.50

25.00

440

...

350

...

...

 6

2219

T87

25.00

80.00

440

...

350

...

...

 5

2219

T87

80.00

100.00

425

...

345

...

...

 3

2219

T87

100.00

120.00

420

...

340

...

...

 2

2219

FG

6.30

50.00

...

...

...

...

...

...

Alclad 2219

O

0.50

1.00

...

220

...

110

12

...

Alclad 2219

O

1.00

2.50

...

220

...

110

12

...

Alclad 2219

O

2.50

12.50

...

220

...

110

12

...

Alclad 2219

O

12.50

50.00

...

 220H

...

 110H

...

10

Alclad 2219

T31K (flat sheet)

1.00

2.50

290

...

170

...

10

...

Alclad 2219

T31K (flat sheet)

2.50

6.30

305

...

180

...

10

...

Alclad 2219

T351E,K plate
(formerly T31 plate)

6.30

12.50

305

...

180

...

10

...

Alclad 2219

T37K

1.00

2.50

310

...

235

...

 6

...

Alclad 2219

T37K

2.50

12.50

325

...

240

...

 6

...

Alclad 2219

T62F

0.50

1.00

305

...

200

...

 6

...

Alclad 2219

T62F

1.00

2.50

340

...

220

...

 7

...

Alclad 2219

T62F

2.50

6.30

350

...

235

...

 7

...

Alclad 2219

T62F

6.30

12.50

350

...

235

...

 8

...

Alclad 2219

T62F

12.50

25.00

 370H

...

 250H

...

...

 7

Alclad 2219

T62F

25.00

50.00

 370H

...

 250H

...

...

 6

Alclad 2219

T81 (flat sheet)

0.50

1.00

340

...

255

...

 6

...

Alclad 2219

T81 (flat sheet)

1.00

2.50

380

...

285

...

 7

...

Alclad 2219

T81 (flat sheet)

2.50

6.30

400

...

295

...

 7

...

Alclad 2219

T851E plate
(formerly T81 plate)

6.30

12.50

400

...

290

...

 8

...

Alclad 2219

T87

1.00

2.50

395

...

315

...

 6

...

Alclad 2219

T87

2.50

6.30

415

...

330

...

 6

...

Alclad 2219

T87

6.30

12.50

415

...

330

...

 7

...

Alclad 2219

FG

6.30

50.00

...

...

...

...

...

...

6013

T4

0.50

6.30

275

...

145

...

20

...

6013

T6

0.50

6.30

360

...

315

...

8

...

6013

T651E

6.30

40.00

365

...

305

...

...

4

6013

T651E

40.00

80.00

370

...

325

...

...

4

6013

T651E

80.00

160.00

380

...

325

...

...

3

6061

O

0.15

0.20

...

150

...

 85

10

...

6061

O

0.20

0.25

...

150

...

 85

12

...

6061

O

0.25

0.50

...

150

...

 85

14

...

6061

O

0.50

3.20

...

150

...

 85

16

...

6061

O

3.20

12.50

...

150

...

 85

18

...

6061

O

12.50

25.00

...

150

...

...

...

16

6061

O

25.00

80.00

...

150

...

...

...

14

6061

T4

0.15

0.20

205

...

110

...

10

...

6061

T4

0.20

0.25

205

...

110

...

12

...

6061

T4

0.25

0.50

205

...

110

...

14

...

6061

T4

0.50

6.30

205

...

110

...

16

...

6061

T451E

6.30

12.50

205

...

110

...

18

...

6061

T451E

12.50

25.00

205

...

110

...

...

16

6061

T451E

25.00

80.00

205

...

110

...

...

14

6061

T42F

0.15

0.20

205

...

 95

...

10

...

6061

T42F

0.20

0.25

205

...

 95

...

12

...

6061

T42F

0.25

0.50

205

...

 95

...

14

...

6061

T42F

0.50

6.30

205

...

 95

...

16

...

6061

T42F

6.30

12.50

205

...

 95

...

18

...

6061

T42F

12.50

25.00

205

...

 95

...

...

16

6061

T42F

25.00

80.00

205

...

 95

...

...

14

6061

T6, T62F

0.15

0.20

290

...

240

...

 4

...

6061

T6, T62F

0.20

0.25

290

...

240

...

 6

...

6061

T6, T62F

0.25

0.50

290

...

240

...

 8

...

6061

T6, T62F

0.50

6.30

290

...

240

...

10

...

6061

T62F, T651E

6.30

12.50

290

...

240

...

10

...

6061

T62F, T651E

12.50

25.00

290

...

240

...

...

 8

6061

T62F, T651E

25.00

50.00

290

...

240

...

...

 7

6061

T62F, T651E

50.00

100.00

290

...

240

...

...

 5

6061

T62F, T651E

100.00

 150.00L

275

...

240

...

...

 5

6061

FG

6.30

80.00

...

...

...

...

...

...

Alclad 6061

O

0.24

0.50

...

140

...

 85

14

...

Alclad 6061

O

0.50

3.20

...

140

...

 85

16

...

Alclad 6061

O

3.20

12.50

...

140

...

 85

18

...

Alclad 6061

O

12.50

25.00

...

 150H

...

...

...

16

Alclad 6061

O

25.00

80.00

...

 150H

...

...

...

14

Alclad 6061

T4

0.24

0.50

185

...

 95

...

14

...

Alclad 6061

T4

0.50

6.30

185

...

 95

...

16

...

Alclad 6061

T451E

6.30

12.50

185

...

 95

...

18

...

Alclad 6061

T451E

12.50

25.00

205H

...

 110H

...

...

16

Alclad 6061

T451E

25.00

80.00

205H

...

 110H

...

...

14

Alclad 6061

T42F

0.24

0.50

185

...

 85

...

14

...

Alclad 6061

T42F

0.50

6.30

185

...

 85

...

16

...

Alclad 6061

T42F

6.30

12.50

185

...

 85

...

18

...

Alclad 6061

T42F

12.50

25.00

 205H

...

  95H

...

...

16

Alclad 6061

T42F

25.00

80.00

 205H

...

  95H

...

...

14

Alclad 6061

T6, T62F

0.24

0.50

260

...

220

...

 8

...

Alclad 6061

T6, T62F

0.50

6.30

260

...

220

...

10

...

Alclad 6061

T62F, T651E

6.30

12.50

260

...

220

...

10

...

Alclad 6061

T62F, T651E

12.50

25.00

 290H

...

 240H

...

...

 8

Alclad 6061

T62F, T651E

25.00

50.00

 290H

...

 240H

...

...

 7

Alclad 6061

T62F, T651E

50.00

100.00

 290H

...

 240H

...

...

 5

Alclad 6061

T62F, T651E

100.00

120.00L

 275H

...

 240H

...

...

 5

Alclad 6061

FG

6.30

80.00

...

...

...

...

...

...

7075

O

0.39

12.50

...

275

...

145

10

...

7075

O

12.50

50.00

...

275

...

...

...

 9

7075

T6, T62F

0.19

0.32

510

...

435

...

 5

...

7075

T6, T62F

0.32

1.00

525

...

460

...

 8

...

7075

T6, T62F

1.00

3.20

540

...

470

...

 9

...

7075

T6, T62F

3.20

4.70

545

...

475

...

 9

...

7075

T6, T62F

4.70

6.30

550

...

475

...

9

...

7075

T62F, T651E

6.30

12.50

540

...

460

...

 9

...

7075

T62F, T651E

12.50

25.00

540

...

470

...

...

 6

7075

T62F, T651E

25.00

50.00

530

...

460

...

...

 5

7075

T62F, T651E

50.00

60.00

525

...

440

...

...

 4

7075

T62F, T651E

60.00

80.00

495

...

420

...

...

 4

7075

T62F, T651E

80.00

90.00

490

...

400

...

...

 4

7075

T62F, T651E

90.00

100.00

460

...

370

...

...

 2

7075

T73 sheet

1.00

6.30

460

...

385

...

 8

...

7075

T7351E plate

6.30

12.50

475

...

390

...

 7

...

7075

T7351E plate

12.50

25.00

475

...

390

...

...

 6

7075

T7351E plate

25.00

50.00

475

...

390

...

...

 5

7075

T7351E plate

50.00

60.00

455

...

360

...

...

 5

7075

T7351E plate

60.00

80.00

440

...

340

...

...

 5

7075

T7351E plate

80.00

90.00

435

...

340

...

...

5

7075

T7351E plate

90.00

100.00

420

...

330

...

...

5

7075

T76 sheet

1.60

6.30

505

...

425

...

 8

...

7075

T7651E plate

6.30

12.50

495

...

420

...

 8

...

7075

T7651E plate

12.50

25.00

490

...

415

...

...

 5

7075

FG

6.30

100.00

...

...

...

...

...

...

Alclad 7075

O

0.19

0.40

...

250

...

140

 9

...

Alclad 7075

O

0.40

1.60

...

250

...

140

10

...

Alclad 7075

O

1.60

4.00

...

260

...

140

10

...

Alclad 7075

O

4.00

12.50

...

270

...

145

10

...

Alclad 7075

O

12.50

25.00

...

 275H

...

...

...

 9

Alclad 7075

T6, T62F

0.19

0.32

470

...

400

...

 5

...

Alclad 7075

T6, T62F

0.32

1.00

490

...

420

...

 8

...

Alclad 7075

T6, T62F

1.00

1.60

495

...

425

...

 9

...

Alclad 7075

T6, T62F

1.60

3.20

510

...

440

...

 9

...

Alclad 7075

T6, T62F

3.20

4.70

510

...

440

...

 9

...

Alclad 7075

T6, T62F

4.70

6.30

525

...

450

...

 9

...

Alclad 7075

T62F, T651E

6.30

12.50

515

...

 445H

...

 9

...

Alclad 7075

T62F, T651E

12.50

25.00

 540H

...

 470H

...

...

 6

Alclad 7075

T62F, T651E

25.00

50.00

 530H

...

 460H

...

...

 5

Alclad 7075

T62F, T651E

50.00

60.00

 525H

...

 440H

...

...

 4

Alclad 7075

T62F, T651E

60.00

80.00

 495H

...

 420H

...

...

 4

Alclad 7075

T62F, T651E

80.00

90.00

 490H

...

 400H

...

...

 4

Alclad 7075

T62F, T651E

90.00

100.00

 460H

...

 370H

...

...

 2

Alclad 7075

T76 sheet

1.00

1.60

460

...

385

...

 8

...

Alclad 7075

T76 sheet

1.60

4.70

470

...

395

...

 8

...

Alclad 7075

T76 sheet

4.70

6.30

485

...

405

...

8

...

Alclad 7075

T7651E plate

6.30

12.50

475

...

400

...

 8

...

Alclad 7075

T7651E plate

12.50

25.00

 490H

...

 415H

...

...

 5

Alclad 7075

FG

6.30

100.00

...

...

...

...

...

...

Alclad 1-Side 7075

O

0.39

1.60

...

260

...

145

10

...

Alclad 1-Side 7075

O

1.60

4.00

...

270

...

145

10

...

Alclad 1-Side 7075

O

4.00

12.50

...

270

...

145

10

...

Alclad 1-Side 7075

O

12.50

25.00

...

 275H

...

...

...

 9

Alclad 1-Side 7075

T6, T62F

0.19

0.32

490

...

415

...

5

...

Alclad 1-Side 7075

T6, T62F

0.32

1.00

510

...

440

...

8

...

Alclad 1-Side 7075

T6, T62F

1.00

1.60

515

...

450

...

 9

...

Alclad 1-Side 7075

T6, T62F

1.60

3.20

525

...

455

...

 9

...

Alclad 1-Side 7075

T6, T62F

3.20

4.70

530

...

460

...

 9

...

Alclad 1-Side 7075

T6, T62F

4.70

6.30

540

...

460

...

 9

...

Alclad 1-Side 7075

T62F, T651E

6.30

12.50

525

....

455

...

 9

...

Alclad 1-Side 7075

T62F, T651E

12.50

25.00

 540H

...

 470H

...

...

 6

Alclad 1-Side 7075

T62F, T651E

25.00

50.00

 530H

...

 460H

...

...

 5

Alclad 1-Side 7075

FG

6.30

50.00

...

...

...

...

...

...

(A)To determine conformance to this specification, each value for tensile strength shall be rounded to the nearest 1 MPa and each value for elongation to the nearest 0.5 %, both in accordance with the Rounding Method of Practice E29.
(B)The basis for establishment of mechanical property limits is shown in Annex AI.
(C)Elongations in 50 mm apply for thicknesses up through 12.50 mm and in 5× diameter for thicknesses over 12.50 mm.
(D)Coiled sheet.
(E)For stress-relieved tempers (T351, T451, T651, T7351, T7651, and T851), characteristics and properties other than those specified may differ somewhat from the corresponding characteristics and properties of material in the basic temper.
(F)Material in the T42, T62, and T72 tempers is not available from the material producer.
(G)Test for tensile properties in the F temper are not required.
(H)The tension test specimen from plate over 12.50 mm in thickness is machined from the core and does not include the cladding.
(I)The T72 temper is applicable only to Alloys 2024 and Alclad 2024 sheet solution heat treated and artificially overaged by the user to develop increased resistance to stress-corrosion cracking.
(J)Short transverse tensile properties are not applicable to material less than 40 mm in thickness.
(K)Use of Alloys 2219 and Alclad 2219 in the T31, T351, and T37 tempers for finished products is not recommended.
(L)The properties for this thickness apply only to the T651 temper.

1.1.1Plate in all alloys and sheet in heat-treatable alloys: mill finish.

1.1.2Sheet in nonheat-treatable alloys: mill finish, one-side bright mill finish, standard one-side bright finish, and standard two-sides bright finish.

1.2Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). The equivalent Unified Numbering System (UNS) alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.

Note 1:Throughout this specification, use of the term alloy in the general sense includes aluminum as well as aluminum alloy.

Note 2:See Specification B632/B632M for Tread Plate.

Note 3:See Specification B928/B928M for 5xxx-H116 and 5xxx-H321 aluminum alloys containing 3 % or more nominal magnesium and intended for marine service and similar environments. Other alloy-temper products listed in Specification B209, which do not require the additional corrosion testing/capability called out in Specification B928/B928M, may be suitable for marine and similar environment applications.

1.3For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.

1.4This specification is the SI companion to Specification B209.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
B 07
DevelopmentNote
Supersedes MIL A 52174. (05/2004) Supersedes SAE AMS QQ A 250/19 and SAE AMS QQ A 250/20. (09/2006)
DocumentType
Redline
Pages
29
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

Standards Relationship
UNE 38073:1984 Identical

ASTM B 947 : 2014 : REDLINE Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ASTM F 1099M : 1998 : R2005 Standard Specification for Rat Guards, Ship's (Metric)
ASTM F 1099M : 1998 : R2011 Standard Specification for Rat Guards, Ship's (Metric)
ASTM D 2510 : 1994 : R2012 Standard Test Method for Adhesion of Solid Film Lubricants
DOD-S-70339 Base Document:1988 SEAL RING, METAL AND NON-METAL, FLAT, METRIC GENERAL SPECIFICATION FOR
DWA-M 143-20:2018 TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS
AASHTO M 197 : 2006 SPECIFICATION FOR ALUMINUM ALLOY SHEET FOR CORRUGATED ALUMINUM PIPE
MIL-DTL-15024 Revision F:1997 Plates and Tags for Identification of Equipment, General Specification for
ASTM D 2510 : 1994 : R1998 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM F 683 : 2014 : REDLINE Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
B620-14 (R2019) Highway tanks and TC portable tanks for the transportation of dangerous goods
AASHTO M 268 : 2015 SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR FLAT AND VERTICAL TRAFFIC CONTROL APPLICATIONS
MIL C 24712 : A COATINGS, POWDER (METRIC)
DOD-S-70340 Base Document:1988 SEAL RING, METAL, ASBESTOS FILLER, METRIC
ASTM B 744/B744M : 2015 : REDLINE Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe
MIL-DTL-55074 Revision G:2013 Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for
ASTM D 4956 : 2017 : REDLINE SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL
MIL-DTL-28840-1 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS
S157-17/S157.1-17 Strength design in aluminum / Commentary on CSA S157-17, Strength design in aluminum
AASHTO M 219 : 1992 SPECIFICATION FOR CORRUGATED ALUMINUM ALLOY STRUCTURAL PLATE FOR FIELD-BOLTED PIPE, PIPE-ARCHES, AND ARCHES
ASTM F 1099M:1998 Standard Specification for Rat Guards, Ship's (Metric)
AWWA C513 : 2005 OPEN-CHANNEL, FABRICATED-METAL SLIDE GATES AND OPEN-CHANNEL, FABRICATED-METAL WEIR GATES
ASTM B 881 : 2017 : REDLINE Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
ASTM B 253 : 2011 : R2017 Standard Guide for Preparation of Aluminum Alloys for Electroplating
DOD-S-70338 Base Document:1988 SEAL RING, METAL, METRIC GENERAL SPECIFICATION FOR
ASTM B 253 : 2011 Standard Guide for Preparation of Aluminum Alloys for Electroplating
ASTM D 2510 : 1994 : R2006 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D 2510 : 1994 : R2017 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM B 745/B745M : 2015 : REDLINE Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
ASTM B 746/B746M : 2016 : REDLINE Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
ASME B18.29.2M:2005 HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)
ASME B18.29.2M : 2005 : R2017 HELICAL COIL SCREW THREAD INSERTS: FREE RUNNING AND SCREW LOCKING (METRIC SERIES)

ISO 209-1:1989 Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition
ANSI H35.1/H35.1M : 2017 ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM
ASTM B 918 : 2001 Standard Practice for Heat Treatment of Wrought Aluminum Alloys
ASTM E 607 : 2002 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM B 666/B666M : 2015 : REDLINE Standard Practice for Identification Marking of Aluminum and Magnesium Products
EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
SAE AMS 2772 : 2016 HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS
ASTM E 716 : 2016 : REDLINE Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ISO 6361-2:2014 Wrought aluminium and aluminium alloys Sheets, strips and plates Part 2: Mechanical properties
ASTM B 947 : 2014 : REDLINE Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
ASTM B 557M : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
ASTM E 290 : 2014 : REDLINE Standard Test Methods for Bend Testing of Material for Ductility
ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
ISO 2107:2007 Aluminium and aluminium alloys — Wrought products — Temper designations
ASTM E 1004 : 2017 : REDLINE Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
ANSI H35.2M : 2013 DIMENSIONAL TOLERANCES FOR ALUMINUM MILL PRODUCTS (METRIC)

View more information
US$108.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.