• There are no items in your cart

ASTM B 818 : 2003 : R2018

Current
Current

The latest, up-to-date edition.

Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy(UNS R31233) Plate, Sheet and Strip
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

11-01-2018

CONTAINED IN VOL. 02.05, 2017 Describes equipment and test methods for determining the porosity of metallic coatings, where the pores penetrate down to a silver, copper, or copper-alloy substrate.

1.1This specification covers cobalt-chromium-nickel-molybdenum-tungsten alloy UNS R31233 in the form of rolled plate, sheet, and strip for wear applications and general corrosion service.

1.2The following products are covered under this specification:

1.2.1Sheet and Strip—Hot or cold rolled, annealed and descaled unless solution-annealing is performed in an atmosphere yielding a bright finish.

1.2.2Plate—Hot rolled, solution-annealed, and descaled.

1.3The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
B 02
DocumentType
Standard
Pages
2
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

EN ISO 10308:2006 Metallic coatings - Review of porosity tests (ISO 10308:2006)
ASTM B 765 : 2003 : R2008 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM B 877 : 1996 : R2013 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
ASTM B 799 : 1995 : R2000 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ASTM B 866 : 1995 : R2018 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
ASTM B 798 : 1995 : R2009 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM B 866 : 1995 : R2008 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
ASTM B 867 : 1995 : R2008 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
ASTM B 798 : 1995 : R2000 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM B 799 : 1995 : R2014 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ASTM B 689 : 1997 : R2008 Standard Specification for Electroplated Engineering Nickel Coatings
ASTM B 679 : 1998 : R2009 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM B 877 : 1996 : R2003 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
ASTM B 765 : 2003 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM B 867 : 1995 : R2013 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
ASTM B 920 : 2016 : REDLINE Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
ASTM B 679 : 1998 : R2004 : EDT 1 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM B 877 : 1996 : R2018 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
ASTM B 545 : 2013 : REDLINE Standard Specification for Electrodeposited Coatings of Tin
ASTM B 741 : 1995 : R2000 Standard Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography (Withdrawn 2005)
ASTM B 735 : 2016 : REDLINE Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
ASTM B 866 : 1995 : R2003 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
ASTM B 798 : 1995 : R2005 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM B 689 : 1997 : R2003 Standard Specification for Electroplated Engineering Nickel Coatings
ASTM B 679 : 1998 : R2015 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM B 867 : 1995 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
ASTM B 866 : 1995 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion
ASTM B 679 : 1998 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use
ASTM B 689 : 1997 : R2013 Standard Specification for Electroplated Engineering Nickel Coatings
ASTM B 605 : 1995 : REV A : R2004 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
ASTM B 689 : 1997 Standard Specification for Electroplated Engineering Nickel Coatings
ASTM B 867 : 1995 : R2003 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
ASTM B 877 : 1996 : R2008 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
ISO 10308:2006 Metallic coatings Review of porosity tests
ASTM B 799 : 1995 : R2005 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ASTM B 765 : 2003 : R2018 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM B 798 : 1995 : R2014 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
ASTM B 605 : 1995 : REV A : R2015 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
DIN EN ISO 10308:2006-04 METALLIC COATINGS - REVIEW OF POROSITY TESTS
ASTM B 765 : 2003 : R2013 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM B 605 : 1995 : REV A : R1999 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
ASTM B 605 : 1995 : REV A : R2009 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy
BS EN ISO 10308:2006 Metallic coatings. Review of porosity tests
ASTM B 877 : 1996 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
ASTM B 984 : 2012 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use
ASTM B 799 : 1995 : R2009 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
ASTM B 866 : 1995 : R2013 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

ASTM B 906 : 2019 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
ASTM B 741 : 1995 : R2000 Standard Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography (Withdrawn 2005)
ASTM B 735 : 2016 : REDLINE Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor
ASTM B 542 : 2013 : REDLINE Standard Terminology Relating to Electrical Contacts and Their Use
ASTM B 765 : 2003 : R2018 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings
ASTM B 906 : 2022 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

View more information
US$55.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.