• There are no items in your cart

ASTM B 85 : 2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Aluminum-Alloy Die Castings
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

04-10-2003

CONTAINED IN VOL. 02.02, 2005 Deals with aluminum-alloy die castings in ten alloy compositions.

1.1 This specification covers aluminum-alloy die castings of all compositions. Thirteen of the most commonly die cast alloy compositions are specified, designated as shown in Table 1.

1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent unified numbering system alloy designations are in accordance with Practice E 527.

1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys and their properties in this specification, see Annex A1 and Annex A2.

1.4 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Committee
B 07
DocumentType
Standard
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

MIL-G-3111 Revision C:1961 GENERATOR, ELECTRIC DIRECT CURRENT NAVAL SHIPBOARD USE
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
MIL-B-53102 Base Document:1990 BERM LINER ASSEMBLIES, ARCTIC SERVICE
MIL-T-24103 Base Document:1964 THERMOMETER, SELF INDICATING, 5 INCH SCALE SIZE, LIQUID IN GLASS, MERCURY
PREN 6068 : 200P2 AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE
ASTM C 599 : 1991 : R1995 : EDT 1 Standard Specification for Conical Process Glass Pipe and Fittings (Withdrawn 2002)
SAE AS 95234A : 2020 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
MIL-T-53101 Base Document:1990 TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE
MIL-DTL-1716 Revision J:1997 POLE, TENT, TELESCOPIC, ADJUSTABLE 5 FEET TO 9 FEET, MAGNESIUM
MIL F 39000 : A FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR
MIL-DTL-26518 Revision C:2000 CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR
MIL-DTL-28731 Revision F:2007 CONNECTORS, ELECTRICAL, RECTANGULAR, REMOVABLE CONTACT, FORMED BLADE, FORK TYPE (FOR RACK AND PANEL AND OTHER APPLICATIONS)
MIL-T-52983 Revision G:1994 TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL
MIL F 24044 : 0 FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR
MIL-G-24659 Revision A:1993 GAGE, DIFFERENTIAL, DIAL INDICATING
ASTM E 784 : 1989 : R2017 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
MIL L 12632 : D LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR
CSA 6.18-02 (R2017) Service Regulators for Natural Gas
SAE AIR 5919 : 2017 ALTERNATIVES TO CADMIUM PLATING
SAE AS 81659 : 2017 CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR
ASTM B 253 : 2011 : R2017 Standard Guide for Preparation of Aluminum Alloys for Electroplating
MIL-DTL-5015 Revision H:2000 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR
MIL-G-18997 Revision E:1991 GAUGE, PRESSURE, DIAL INDICATING
MIL-STD-186 Revision F:2002 PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
MIL F 3922 : B FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR
MIL T 0053055 : B TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED
MIL-DTL-12520 Revision D:2005 Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for
QQ-A-591 Revision F:1981 ALUMINUM ALLOY DIE CASTINGS
MIL-DTL-2 Revision G:2006 VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
MIL-DTL-28731-38 Revision A:2004 Connector, Electrical, Rectangular Shield, for use with MIL-DTL-28731/32
AWWA C704 : 2015 PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS
ASTM E 784 : 1989 : R2000 : EDT 1 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
ASTM E 1379 : 1990 : R2005 Standard Specification for Laboratory Glass Dewar Flask
MIL-DTL-55302-42 Revision C:2007 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, ELECTRICAL, POLARIZED SHELL, FEMALE, .100 INCH CONTACT SPACING, REMOVABLE CRIMP CONTACTS
SAE AS 50151 : 2015 CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR
MIL T 20177 : D NOTICE 1 MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE
MIL-F-63446 Revision B:1994 FUZES, GENERAL PURPOSE GRENADE, M230 AND M231 (PRACTICE)
MIL-T-53066 Revision B:1994 TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL
ARINC 404B-2:2015 CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS
CSA 6.18 : 2002 SERVICE REGULATORS FOR NATURAL GAS
SAE AMS QQ A591 : 2014 ALUMINUM ALLOY DIE CASTINGS
ASTM E 1379 : 1990 : R2010 Standard Specification for Laboratory Glass Dewar Flask
SAE AIR 4789 : 2016 AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION
SAE AS 95234 : 2014 CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR
ASTM E 784 : 1989 : R2005 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E 784 : 1989 : R1996 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E 784 : 1989 : R2011 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp
ASTM E 1379 : 1990 : R2016 Standard Specification for Laboratory Glass Dewar Flask
ASTM B 881 : 2017 : REDLINE Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
MS3481 Revision A:2007 TOOL, CONNECTOR ASSEMBLY, FOR MIL-DTL-26482 CONNECTORS
CSA 6.18 : 2002 : R2013 SERVICE REGULATORS FOR NATURAL GAS
ASTM B 253 : 2011 Standard Guide for Preparation of Aluminum Alloys for Electroplating
SAE AS 81582 : 2017 CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
ASTM E 1379 : 1990 : R1999 : EDT 1 Standard Specification for Laboratory Glass Dewar Flask

MIL-STD-129 Revision R:2014 Military Marking for Shipment and Storage
ASTM E 607 : 2002 Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
ASTM E 505 : 2015 : REDLINE Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings
FED-STD-184 Revision B:1977 IDENTIFICATION MARKING OF ALUMINUM, MAGNESIUM, AND TITANIUM
FED-STD-123 Revision H:2007 MARKING FOR SHIPMENT (CIVIL AGENCIES)
ASTM E 716 : 2016 : REDLINE Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E 527 : 2016 : REDLINE Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
ASTM E 101 : 1991 Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996)
ASTM E 227 : 1990 : R1996 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002)
ANSI H35.1 : 2006 ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM
ASTM E 8 : 2004 Standard Test Methods for Tension Testing of Metallic Materials
ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.