Name: ASTM C 1036 : 2016
Brand: ASTM
Price: 75.00 USD

ASTM C 1036 : 2016

Superseded

View Superseded by

Standard Specification for Flat Glass

Available format(s)

Hardcopy , PDF

Superseded date

05-24-2021

Language(s)

English

Published date

12-01-2016

Publisher

American Society for Testing and Materials

This specification covers the requirements for annealed, monolithic flat soda-lime glass supplied as cut sizes or stock sheets.

1.1This specification covers the requirements for annealed, monolithic flat soda-lime glass supplied as cut sizes or stock sheets.

1.2This specification is applicable for laboratory and field evaluation only to the extent that such evaluation can be carried out in accordance with the test method(s) prescribed herein.

1.3This specification covers the quality requirements of flat, transparent, clear, and tinted glass. This glass is intended to be used primarily for architectural glazing products including: coated glass, insulating glass units, laminated glass, mirrors, spandrel glass, or similar uses.

Note 1:Reflective distortion is not addressed in this specification.

1.4This specification covers the quality requirements of patterned or wired glasses intended to be used primarily for decorative and general glazing applications.

1.5The values given in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee	C 14
DocumentType	Standard
Pages	10
PublisherName	American Society for Testing and Materials
Status	Superseded
SupersededBy	ASTM C 1036 : 2021
Supersedes	ASTM C 1036 : 2011 : EDT 1

ASTM E 998 : 2019	Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads
ASTM C 704/C704M : 2015 : EDT 1	Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
ASTM E 3120 : 2019	Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
ASTM E 546 : 2014 : R2020	Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
ASTM C 964 : 2020	Standard Guide for Lock-Strip Gasket Glazing
ASTM C 1375 : 2000 : R2020	Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C 1901 : 2021 : EDT 2	Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
ASTM C 1651 : 2011 : R2018	Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
ASTM C 1172 : 2019	Standard Specification for Laminated Architectural Flat Glass
ASTM C 1900 : 2020	Standard Practice for Weathering and Evaluation of Laminated Glass
ASTM C 1422/C1422M : 2020 : REV A	Standard Specification for Chemically Strengthened Flat Glass
ASTM E 576 : 2014 : R2020	Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
ASTM E 546 : 2014	Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
ASTM C 1422/C1422M : 2015	Standard Specification for Chemically Strengthened Flat Glass
ASTM E 2751/E2751M : 2017 : REV A	Standard Practice for Design and Performance of Supported Laminated Glass Walkways
ASTM E 2188 : 2019	Standard Test Method for Insulating Glass Unit Performance
ASTM C 1322 : 2015 : R2019	Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
ASTM F 3006 : 2019	Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
ASTM E 576 : 2014	Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
ASTM G 24 : 2013	Standard Practice for Conducting Exposures to Daylight Filtered Through Glass
ASTM E 2136 : 2004 : R2013	Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)
ASTM C 1048 : 2018	Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
ASTM C 1464 : 2016	Standard Specification for Bent Glass
ASTM C 1349 : 2017	Standard Specification for Architectural Flat Glass Clad Polycarbonate
ASTM E 3120 : 2017	Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
ASTM C 1376 : 2015	Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
ASTM C 1375 : 2000 : R2014	Standard Guide for Substrates Used in Testing Building Seals and Sealants
ASTM C 1443 : 1999 : R2016	Standard Specification for Glasses, Portlight, Circular, Fully Tempered (Withdrawn 2021)
ASTM E 2190 : 2019	Standard Specification for Insulating Glass Unit Performance and Evaluation
ASTM F 782 : 2001 : R2012	Standard Specification for Doors, Furniture, Marine
ASTM F 3007 : 2019	Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
ASTM F 2248 : 2019	Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
ASTM C 1652/C1652M : 2014	Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
ASTM C 1503 : 2018	Standard Specification for Silvered Flat Glass Mirror
ASTM E 2461 : 2012 : R2017	Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
ASTM C 1401 : 2014	Standard Guide for Structural Sealant Glazing
ASTM C 964 : 2007 : R2012	Standard Guide for Lock-Strip Gasket Glazing
ASTM E 1300 : 2016	Standard Practice for Determining Load Resistance of Glass in Buildings
ASTM C 1376 : 2021	Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
ASTM C 1367 : 2019	Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures