ASTM C 162 : 2005 : R2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Terminology of Glass and Glass Products
Hardcopy , PDF
12-19-2023
English
11-17-2015
CONTAINED IN VOL. 15.02, 2017 Describes terms generally used in the glass industry.
Committee |
C 14
|
DocumentType |
Reference Material
|
Pages |
16
|
ProductNote |
Reconfirmed 2015
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM D 5359 : 1998 : R2021 | Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber |
ASTM C 1256 : 1993 : R2019 | Standard Practice for Interpreting Glass Fracture Surface Features |
ASTM E 2190 : 2019 | Standard Specification for Insulating Glass Unit Performance and Evaluation |
ASTM E 2927 : 2016 : EDT 1 | Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons |
ASTM F 3007 : 2019 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
ASTM C 1426 : 2014 : R2020 | Standard Practices for Verification and Calibration of Polarimeters |
ASTM C 1401 : 2023 | Standard Guide for Structural Sealant Glazing |
ASTM C 1901 : 2021 : EDT 2 | Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass |
ASTM E 2269 : 2021 | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography |
ASTM E 982 : 1994 : R2021 | Standard Specification for Laboratory Glass Test Tubes |
ASTM C 1651 : 2011 : R2018 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
ASTM C 1322 : 2015 : R2019 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 2649 : 2020 | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy |
ASTM C 1652/C1652M : 2021 | Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids |
ASTM F 3006 : 2020 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
ASTM E 772 : 2015 : R2021 | Standard Terminology of Solar Energy Conversion |
ASTM C 1376 : 2021 : REV A | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
ASTM F 2179 : 2020 | Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers |
ASTM C 1464 : 2021 | Standard Specification for Bent Glass |
ASTM C 1349 : 2017 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
ASTM E 2189 : 2019 | Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units |
ASTM E 2431 : 2012 : R2020 | Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings |
ASTM E 2875/E2875M : 2012 : R2021 | Standard Guide for Personal Protective Equipment for the Handling of Flat Glass |
ASTM E 3120 : 2019 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
ASTM E 2461 : 2022 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
ASTM C 1720 : 2021 | Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses |
ASTM C 1503 : 2018 | Standard Specification for Silvered Flat Glass Mirror |
ASTM E 1732 : 2022 | Standard Terminology Relating to Forensic Science |
ASTM C 1279 : 2023 | Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM C 1663 : 2018 | Standard Test Method for Measuring Waste Glass or Glass Ceramic Durability by Vapor Hydration Test |
ASTM C 965 : 2023 | Standard Practice for Measuring Viscosity of Glass Above the Softening Point |
ASTM C 978 : 2004 : R2019 | Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures |
ASTM C 1203 : 2004 : R2019 | Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel |
ASTM C 1036 : 2021 | Standard Specification for Flat Glass |
ASTM E 2188 : 2019 | Standard Test Method for Insulating Glass Unit Performance |
ASTM C 1422/C1422M : 2020 : REV A | Standard Specification for Chemically Strengthened Flat Glass |
ASTM F 2813 : 2018 : R2023 | Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables |
ASTM E 1157 : 1987 : R2018 : EDT 1 | Standard Specification for Sampling and Testing of Reusable Laboratory Glassware |
ASTM C 1908 : 2021 | Standard Test Method for Pummel Adhesion Testing of Two-ply Laminated Architectural Glass |
ASTM F 218 : 2013 : R2020 | Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass |
ASTM E 708 : 1979 : R2017 | Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers |
ASTM C 829 : 1981 : R2022 | Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method |
ASTM D 542 : 2022 | Standard Test Method for Index of Refraction of Transparent Organic Plastics |
ASTM C 1285 : 2021 | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
ASTM C 1662 : 2018 | Standard Practice for Measurement of the Glass Dissolution Rate Using the Single-Pass Flow-Through Test Method |
ASTM C 148 : 2017 : REDLINE | Standard Test Methods for Polariscopic Examination of Glass Containers |
ASTM C 1172 : 2009 : EDT 1 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 1048 : 1997 : REV B | Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass |
ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
ASTM C 1172 : 2003 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 1048 : 2012 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
ASTM C 1172 : 2009 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 1048 : 2004 | Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass |
ASTM C 1172 : 2014 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 148 : 2017 : R2022 | Standard Test Methods for Polariscopic Examination of Glass Containers |
ASTM C 1048 : 2012 : EDT 1 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
ASTM C 1172 : 2019 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 1172 : 1996 : EDT 1 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 148 : 2017 | Standard Test Methods for Polariscopic Examination of Glass Containers |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.