ASTM C 1644 : 2006 : R2017
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
11-01-2017
CONTAINED IN VOL. 04.05, 2017 Describes the minimum performance and material requirements for resilient connectors used for connections between reinforced concrete tanks used for septic effluent treatment/detention, including those referenced in Specifications C 913 and C 1227.
1.1This specification covers the minimum performance and material requirements for resilient connectors used for connections between reinforced concrete tanks used for septic effluent treatment/detention, including those referenced in Specifications C913 and C1227.
1.1.1These connectors are designed to eliminate leakage between the pipe(s) and tank.
1.2A complete metric companion to Specification C1644 has been developed—C1644M; therefore, no metric equivalents are presented in this specification.
Note 1:This specification covers the design, material, and performance of the resilient connection only. Connections covered by this specification are adequate for hydrostatic pressures up to 5 psi (11.5 ft) without leakage when tested in accordance with Section 7. Infiltration or exfiltration quantities for an installed system are dependent upon many factors other than the connectors between tanks and pipes, and allowable quantities must be covered by other specifications and suitable testing of the installed pipe and system.
1.3The following precautionary caveat pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
C 27
|
| DocumentType |
Standard
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| ASTM C 1227 : 2013 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1227 : 2009 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
| ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
| ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM C 822 : 2021 | Standard Terminology Relating to Concrete Pipe and Related Products |
| ASTM D 1149 : 2016 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM C 1227 : 2010 : REV A | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 913 : 2021 | Standard Specification for Precast Concrete Water and Wastewater Structures |
| ASTM C 1227 : 2022 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
| ASTM A 240/A240M : 2011 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
| ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
| ASTM C 1227 : 2007 : REV C | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
| ASTM C 913 : 2023 | Standard Specification for Precast Concrete Water and Wastewater Structures |
| ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
| ASTM A 240/A240M : 2005 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 543 : 2014 : REDLINE | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM C 1227 : 2000 : REV A | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM C 1227 : 2003 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
| ASTM D 1149 : 2015 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 543 : 2021 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D 412 : 2016 : EDT 1 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM C 1227 : 2000 : REV B | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 1227 : 2023 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 1227 : 2002 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 1227 : 2002 : REV B | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1149 : 2007 | Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment |
| ASTM C 822 : 2020 | Standard Terminology Relating to Concrete Pipe and Related Products |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
| ASTM C 1227 : 2005 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM A 240/A240M : 2022 : REV B | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
| ASTM C 1227 : 2008 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM A 240/A240M : 2023 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM A 240/A240M : 2022 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 412 : 2016 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
| ASTM C 913 : 2016-07 | SPECIFICATION FOR PRECAST CONCRETE WATER AND WASTEWATER STRUCTURES |
| ASTM D 2240 : 2015 : R2021 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
| ASTM C 1227 : 2007 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
| ASTM D 543 : 2020 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1149 : 2007 : R2012 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1227 : 2007 : REV B | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1149 : 1978 : REV A | Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen) |
| ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
| ASTM A 240/A240M : 2022 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM A 240/A240M : 2020 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM C 1227 : 2020 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1227 : 2013 : REDLINE | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
| ASTM D 412 : 2016 : R2021 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension |
| ASTM C 1227 : 2012 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1227 : 2010 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM C 1227 : 2002 : REV A | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2015 : REDLINE | TERMINOLOGY RELATING TO RUBBER |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
| ASTM C 913 : 2018 | Standard Specification for Precast Concrete Water and Wastewater Structures |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1227 : 2007 : REV A | Standard Specification for Precast Concrete Septic Tanks |
| ASTM A 240/A240M : 2023 : REV A | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
| ASTM D 1149 : 1999 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM C 1227 : 2013 | Standard Specification for Precast Concrete Septic Tanks |
| ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.