• There are no items in your cart

ASTM C 1713 : 2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Mortars for the Repair of Historic Masonry
Available format(s)

Hardcopy , PDF

Superseded date

01-08-2024

Language(s)

English

Published date

07-19-2017

1.1This specification covers mortar for the repair of masonry that was constructed with methods and materials that pre-date the origination of current standards of construction that are compatible with it. The mortar may be used for non-structural purposes such as repointing of the masonry, or for structural purposes such as, but not restricted to, re-construction or repair of mortar joints that contribute to the structural integrity of the masonry.

1.2Masonry includes the following units laid in mortar: (1) cast stone, (2) clay masonry unitsbrick and clay tile, (3) concrete masonry units, (4) natural stone, and (5) terra cotta.

1.3This specification may be used to pre-qualify mortar for a project.

1.4Mortars tested using this specification are laboratory-prepared mortars and do not represent in-place, site mortars.

1.5Use of this specification should be based on a thorough understanding of the function, maintenance, and repair requirements for the preservation and continued performance of the masonry in the context of the building structure and long-term performance. The user of this specification is responsible for examining all criteria and selecting the appropriate mortar formulation and properties required.

1.6The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 12
DocumentType
Standard
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM C 144 : 2018 Standard Specification for Aggregate for Masonry Mortar

ASTM C 511 : 2021 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM C 1093 : 2013 : REV A Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 216 : 2021 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
ASTM E 2260 : 2003 Standard Guide for Repointing (Tuckpointing) Historic Masonry
ASTM C 1489 : 2015 : R2022 Standard Specification for Lime Putty for Structural Purposes
ASTM C 1180 : 2010 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1707 : 2009 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
ASTM C 1072 : 2019 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C 1180 : 2003 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 1384 : 2017 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1707 : 2010 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
ASTM C 1384 : 2000 Standard Specification for Admixtures for Masonry Mortars
ASTM E 96/E96M : 2022 : REV A Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 109/C109M : 2020 : REV B Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 1384 : 2002 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1180 : 2002 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1093 : 2019 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1093 : 2013 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 1072 : 2012 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C 1403 : 2005 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1093 : 1995 Standard Practice for Accreditation of Testing Agencies for Unit Masonry
ASTM C 1329 : 2003 : REV A Standard Specification for Mortar Cement
ASTM C 1506 : 2001 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 109/C109M : 2021 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 1384 : 2012 Standard Specification for Admixtures for Masonry Mortars
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 1403 : 2022 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1072 : 2010 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C 1403 : 2014 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1329 : 2000 Standard Specification for Mortar Cement
ASTM C 1384 : 2012 : REV A Standard Specification for Admixtures for Masonry Mortars
ASTM C 1384 : 2002 : REV A Standard Specification for Admixtures for Masonry Mortars
ASTM C 1157 : 2002 Standard Performance Specification for Hydraulic Cement
ASTM C 1506 : 2016 : REV B Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 1329 : 2004 Standard Specification for Mortar Cement
ASTM C 1489 : 2015 Standard Specification for Lime Putty for Structural Purposes
ASTM C 1707 : 2011 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
ASTM C 1157 : 2003 Standard Performance Specification for Hydraulic Cement
ASTM C 1180 : 2018 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1093 : 2013 : REV A : EDT 1 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1093 : 2015 : REV A : EDT 1 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1180 : 2003 : REV A : EDT 1 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1384 : 2001 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1072 : 2000 : REV A Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C 1400 : 2011 : R2017 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
ASTM C 1403 : 2015 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1093 : 2006 Standard Practice for Accreditation of Testing Agencies for Unit Masonry
ASTM C 1093 : 2015 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1403 : 2022 : REV A Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 511 : 2019 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM C 1384 : 2003 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1506 : 2016 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 1180 : 2003 : REV A Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1180 : 2022 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1403 : 2012 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1506 : 2003 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 1489 : 2001 Standard Specification for Lime Putty for Structural Purposes
ASTM C 1400 : 2001 : R2007 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
ASTM C 1093 : 2007 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM C 1489 : 2001 : R2008 : EDT 1 Standard Specification for Lime Putty for Structural Purposes
ASTM C 1707 : 2018 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
ASTM C 1403 : 2013 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1403 : 2000 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 216 : 2019 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
ASTM C 1506 : 2017 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 1093 : 2012 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1403 : 2006 Standard Test Method for Rate of Water Absorption of Masonry Mortars
ASTM C 1072 : 2005 : REV A Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM E 2260 : 2021 : REV A Standard Guide for Repointing (Tuckpointing) Historic Masonry
ASTM C 1384 : 2018 : EDT 1 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1072 : 2022 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C 1072 : 2011 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C 1400 : 1998 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
ASTM C 1180 : 2007 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1157 : 2000 : REV A Standard Performance Specification for Hydraulic Cement
ASTM C 1157 : 2008 : REV A Standard Performance Specification for Hydraulic Cement
ASTM C 1384 : 2006 : REV A Standard Specification for Admixtures for Masonry Mortars
ASTM C 1093 : 2022 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1072 : 2005 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C 1384 : 2006 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1072 : 2005 : REV B Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM C 1093 : 2008 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1506 : 2009 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 216 : 2022 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
ASTM C 10 : 1976 Specification for Natural Cement (Withdrawn 1978)
ASTM C 1329 : 2005 Standard Specification for Mortar Cement
ASTM C 1072 : 2013 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM E 2260 : 2003 : R2012 : EDT 1 Standard Guide for Repointing (Tuckpointing) Historic Masonry
ASTM E 2260 : 2021 Standard Guide for Repointing (Tuckpointing) Historic Masonry
ASTM C 136 : 1996 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM C 110 : 2000 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C 1384 : 2005 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1072 : 2006 Standard Test Method for Measurement of Masonry Flexural Bond Strength
ASTM E 2260 : 2003 : R2012 Standard Guide for Repointing (Tuckpointing) Historic Masonry
ASTM C 1072 : 2013 : EDT 1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
ASTM C 1157 : 2008 Standard Performance Specification for Hydraulic Cement
ASTM C 150 : 2002 : REV A : EDT 1 Standard Specification for Portland Cement
ASTM C 1384 : 2018 Standard Specification for Admixtures for Masonry Mortars
ASTM C 1180 : 2019 Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1093 : 2009 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1400 : 2011 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
ASTM C 1093 : 2011 Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1180 : 2000 : REV A Standard Terminology of Mortar and Grout for Unit Masonry
ASTM C 1329 : 2003 Standard Specification for Mortar Cement
ASTM C 1506 : 2016 : REV A Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 1506 : 2008 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
ASTM C 1093 : 2015 : REV A Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 1093 : 2022 : REV A Standard Practice for Accreditation of Testing Agencies for Masonry
ASTM C 780 : 2000 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.