• There are no items in your cart

ASTM C 233/C233M : 2018

Current
Current

The latest, up-to-date edition.

Standard Test Method for Air-Entraining Admixtures for Concrete
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

12-15-2018

This test method covers the testing of materials proposed for use as air-entraining admixtures in the field.

1.1This test method covers the testing of materials proposed for use as air-entraining admixtures in the field.

1.2The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Some values have only SI units because the inch-pound equivalents are not used in practice.

Note 1:Sieve size is identified by its standard designation in Specification E11. The alternative designation given in parentheses is for information only and does not represent a different standard sieve size.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 09
DocumentType
Test Method
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 11 : 2020 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM C 173/C173M : 2014 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 33/C33M : 2023 Standard Specification for Concrete Aggregates
ASTM C 173/C173M : 2009 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 231/C231M : 2017 : REV A Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C 670 : 2024 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C 33/C33M : 2018 Standard Specification for Concrete Aggregates
ASTM C 39/C39M : 2021 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 78/C78M : 2021 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 231/C231M : 2014 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM C 192/C192M : 2000 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C 39/C39M : 2023 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 78/C78M : 2016 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 185 : 2015 : REV A Standard Test Method for Air Content of Hydraulic Cement Mortar
ASTM C 232/C232M : 2020 : REV A Standard Test Method for Bleeding of Concrete
ASTM C 173/C173M : 2024 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 231/C231M : 2024 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM E 70 : 2019 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM C 232/C232M : 2021 Standard Test Method for Bleeding of Concrete
ASTM C 39/C39M : 2015 : REV A Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM E 11 : 2022 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 75/D75M : 2009 Standard Practice for Sampling Aggregates
ASTM C 150/C150M : 2021 Standard Specification for Portland Cement
ASTM C 173/C173M : 2016 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 39/C39M : 2020 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 136/C136M : 2014 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
ASTM C 232/C232M : 2020 Standard Test Method for Bleeding of Concrete
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM C 403/C403M : 2023 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM D 75/D75M : 2014 Standard Practice for Sampling Aggregates
ASTM C 173/C173M : 2023 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C 143/C143M : 2015 : REV A Standard Test Method for Slump of Hydraulic-Cement Concrete
ASTM C 670 : 2024 : REV A Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C 39/C39M : 2018 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM C 78/C78M : 2018 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C 666/C666M : 2015 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM C 403/C403M : 2016 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM C 150/C150M : 2020 Standard Specification for Portland Cement
ASTM C 172/C172M : 2014 : REV A Standard Practice for Sampling Freshly Mixed Concrete
ASTM C 150/C150M : 2022 Standard Specification for Portland Cement
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM C 670 : 2015 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C 78/C78M : 2022 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM E 70 : 2024 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
ASTM C 231/C231M : 2022 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.