• There are no items in your cart

ASTM D 1000 : 2017

Current
Current

The latest, up-to-date edition.

Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-01-2017

These test methods cover procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation. These tapes are classified as follows: Class 1—Non-elastomeric backings made from materials such as: Paper, flat or creped.

1.1These test methods cover procedures for testing pressure-sensitive adhesive-coated tapes to be used as electrical insulation. These tapes are classified as follows:

1.1.1Class 1—Non-elastomeric backings made from materials such as:

Paper, flat or creped,

Fabric, uncoated or coated,

Cellulose ester films,

Polyethylene terephthalate (polyester) films,

Fluorocarbon polymer films,

Composite filament films,

Polyamide films,

Polyimide films, and

Combinations thereof.

1.1.2Class 2—Elastomeric backings that are characterized by both high stretch and substantial recovery. These backings are made from materials such as:

Vinyl chloride and co-polymers,

Vinylidene chloride and co-polymers, and

Polyethylene and co-polymers.

1.2Test laminates of Class 1 and Class 2 backings according to Class 1 test methods.

1.3The procedures appear in the sections indicated below and in alphabetical order:

Adhesion Strength to Steel and Backing at Room Temperature

46 – 53

Adhesion Strength to Steel and Backing at Low Temperatures

46 – 53

Bond Strength After Solvent Immersion

110 – 115

Breaking Strength and Elongation at Room Temperature

37 – 45

Breaking Strength and Elongation at Low Temperatures

37 – 45

Conditioning

6 – 8

Curling and Twisting

140 – 146

Dielectric Breakdown Voltage

83 – 90

Effect of Accelerated Aging on High-Temperature Tapes

97 – 103

Flagging

66 – 76

Flammability

104 – 109

Hazards/Precautions

3

Insulation Resistance at High Humidity

91 – 96

Length of Tape in a Roll

28 – 36

Oil Resistance

116 – 122

Puncture Resistance

123 – 128

Resistance to Accelerated Aging (Heat and Moisture)

129 – 139

Sampling

4

Specimen Preparation

5

Thermosetting Properties

77 – 82

Thickness

21 – 27

Unwind Force at Room Temperature

54 – 65

Unwind Force at Low Temperatures

54 – 65

Width

11 – 20

Note 1:These procedures apply to both Class 1 and Class 2 tapes except as noted above.

1.4This is a fire-test response standard (see Section 104).

1.5The values stated in SI units are the standard, unless otherwise noted. If a value for measurement is followed by a value in inch-pound or English units in parentheses, it is likely that the second value will only be approximate and it is for information only. The first stated value is the preferred unit.

Note 2:These test methods are similar to IEC 60454–3, but may differ sometimes in some details.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards see Section 3.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 09
DocumentType
Test Method
Pages
20
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 6343 : 2014 : R2018 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ASTM C 1775 : 2014 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
ASTM D 2305 : 2018 Standard Test Methods for Polymeric Films Used for Electrical Insulation
ASTM D 7932 : 2017 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
ASTM D 2301 : 2010 : R2017 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D 3359 : 2017 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 3006 : 2010 : R2017 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2022)
ASTM C 474 : 2015 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
ASTM F 2992/F2992M : 2015 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment
ASTM D 2148 : 2018 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
ASTM C 1423 : 2016 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
ASTM D 2686 : 2019 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape
ASTM F 2896 : 2011 : R2017 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM D 876 : 2013 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D 3611 : 2006 : R2019 Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
ASTM F 1790/F1790M : 2015 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment
ASTM D 2484 : 2006 : R2012 : EDT 1 Standard Specification for Polyester Film Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2020)
ASTM D 4505 : 2012 : R2017 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
ASTM D 3005 : 2017 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D 2510 : 1994 : R2017 Standard Test Method for Adhesion of Solid Film Lubricants
ASTM D 2754 : 2010 : R2016 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape (Withdrawn 2022)
ASTM D 4592 : 2012 : R2017 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
AWWA C217:2023 Microcrystalline Wax and Petrolatum Tape Coating Systems for Steel Water Pipe and Fittings

ASTM D 1711 : 2002 Standard Terminology Relating to Electrical Insulation
ASTM D 3487 : 2016 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 257 : 2014 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 1711 : 2011 Standard Terminology Relating to Electrical Insulation
ASTM E 691 : 2020 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 1711 : 2011 : REV A Standard Terminology Relating to Electrical Insulation
ASTM D 1711 : 2013 Standard Terminology Relating to Electrical Insulation
ASTM E 691 : 2019 : EDT 1 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E 691 : 2023 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3487 : 2000 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 374/D374M : 2016 Standard Test Methods for Thickness of Solid Electrical Insulation
ASTM D 1711 : 1999 Standard Terminology Relating to Electrical Insulation
ASTM E 691 : 2022 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 5032 : 2011 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM E 691 : 2009 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM A 666 : 2015 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM D 1711 : 2014 : REV A Standard Terminology Relating to Electrical Insulation
ASTM D 3487 : 2008 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 1711 : 2015 Standard Terminology Relating to Electrical Insulation
ASTM D 3487 : 2009 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 1711 : 2014 Standard Terminology Relating to Electrical Insulation
ASTM E 691 : 2021 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D 3487 : 2000 : R2006 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 1711 : 2024 Standard Terminology Relating to Electrical Insulation
ASTM D 1711 : 2022 Standard Terminology Relating to Electrical Insulation
ASTM D 3487 : 1988 : R1993 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 5032 : 2019 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM D 3487 : 2016 : EDT 1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D 1711 : 2020 Standard Terminology Relating to Electrical Insulation
ASTM A 666 : 2023 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM D 1711 : 2008 Standard Terminology Relating to Electrical Insulation
ASTM D 5032 : 1997 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM D 257 : 2014 : R2021 : EDT 1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D 374/D374M : 2023 Standard Test Methods for Thickness of Solid Electrical Insulation

View more information
US$69.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.