• There are no items in your cart

ASTM D 1275 : 2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
Available format(s)

Hardcopy , PDF

Superseded date

02-19-2024

Language(s)

English

Published date

01-07-2016

CONTAINED IN VOL. 10.03, 2016 Defines the detection of corrosive sulfur compounds (both inorganic and organic) in electrical insulating liquids.

1.1This test method describes the detection of corrosive sulfur compounds (both inorganic and organic) in electrical insulating liquids.

1.2New and in-service insulating liquids may contain elemental sulfur or sulfur compounds, or both, that cause corrosion under certain conditions of use. This test method is designed to detect the presence of, or the propensity to form, free (elemental) sulfur and corrosive sulfur compounds by subjecting copper or silver to contact with an insulating liquid under prescribed conditions.

1.3The values stated in SI units are to be regarded as the standard. Inch-pound units are included for informational purposes.

1.4This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 27
DevelopmentNote
Supersedes ASTM D 989. (02/2002)
DocumentType
Test Method
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

12/30257150 DC : 0 BS EN 62770 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS LIQUIDS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
IEEE C57.152-2013 IEEE Guide for Diagnostic Field Testing of Fluid-Filled Power Transformers, Regulators, and Reactors
PD IEC/TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Test method for quantitative determination of elemental sulfur
IEEE C57.637-2015 REDLINE IEEE Guide for the Reclamation of Mineral Insulating Oil and Criteria for Its Use
IEEE 1277-2010 IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
EN 62535:2009 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
EN 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
I.S. EN 60422:2013 MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV))
I.S. EN 62535:2009 INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULPHUR IN USED AND UNUSED INSULATING OIL
I.S. EN 62697-1:2012 TEST METHODS FOR QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN UNUSED AND USED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYLDISULFIDE (DBDS) (IEC 62697-1:2012 (EQV))
ASTM D 117 : 2018 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
ASTM D 5222 : 2016 Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
ASTM D 6871 : 2017 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
ASTM D 3487 : 2016 : EDT 1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
CEI EN 62770 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
BS EN 62697-1:2012 Test methods for quantitative determination of corrosive sulphur compounds in unused and used insulating liquids Test method for quantitative determination of dibenzyldisulfide (DBDS)
06/30159746 DC : 0 BS EN 50503 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - STANDARD FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
BS EN 62770:2014 Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment
07/30168341 DC : DRAFT AUG 2007 BS EN 62535 - INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULFUR IN USED AND UNUSED INSULATING OIL
10/30215366 DC : 0 BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
IEEE C57.147-2008 IEEE Guide for Acceptance and Maintenance of Natural Ester Fluids in Transformers
IEEE C57.13.5-2009 IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
NF EN 62770 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
IEC 62770:2013 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
IEC 62535:2008 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
UNE-EN 62697-1:2013 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
BS EN 62535:2009 Insulating liquids. Test method for detection of potentially corrosive sulphur in used and unused insulating oil
10/30233636 DC : 0 IEC 62697-1 ED.1 - INSULATING LIQUIDS - QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN USED AND UNUSED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYL DISULFIDE (DBDS)
BS EN 60422:2013 Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
IEEE C57.140-2006 IEEE Guide for Evaluation and reconditioning of Liquid Immersed Power Transformers
I.S. EN 62770:2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
ISO 18095:2018 Condition monitoring and diagnostics of power transformers
ASTM D 5222 : 2016 : REDLINE Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
IEEE C57.106-2006 IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment
IEC 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
UNE-EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
IEC 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
CAN/CSA-C50-14 (R2018) Mineral insulating oil, electrical, for transformers and switches
UNE-EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
IEEE 1653.1-2016 IEEE Standard for Traction Power Rectifier Transformers for Substation Applications up to 1500 V DC Nominal Output
IEC TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 3: Test method for quantitative determination of elemental sulfur
IEC TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 2: Test method for quantitative determination of total corrosive sulfur (TCS)
IEEE C57.129-2007 REDLINE IEEE Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
ASTM D 8180 : 2023 Standard Specification for Rerefined Mineral Insulating Liquid Used in Electrical Apparatus
ASTM D 8240 : 2022 : EDT 1 Standard Specification for Less-Flammable Synthetic Ester Liquids Used in Electrical Apparatus
ASTM D 117 : 2022 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
ASTM D 5222 : 2023 Standard Specification for Less Flammable High Molecular Weight Hydrocarbon Mineral Electrical Insulating Liquids
SAE J 311 : 2000 FLUID FOR PASSENGER CAR TYPE AUTOMATIC TRANSMISSIONS

ASTM E 11 : 2020 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 923 : 2015 : R2023 Standard Practices for Sampling Electrical Insulating Liquids
ASTM D 923 : 2015 Standard Practices for Sampling Electrical Insulating Liquids
ASTM E 11 : 2022 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ANSI B74.10 : 2015 GRADING OF ABRASIVE MICROGRITS
ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
ASTM D 130 : 2018 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D 923 : 2015 : REDLINE Standard Practices for Sampling Electrical Insulating Liquids
ASTM D 130 : 2012 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.