ASTM D 1329 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)
English
11-01-2016
CONTAINED IN VOL. 09.01, 2015 Provides temperature-retraction procedure for rapid evaluation of crystallization effects and compares viscoelastic properties of rubber and rubber-like materials at low temperatures.
1.1This test method describes a temperature-retraction procedure for rapid evaluation of crystallization effects and for comparing viscoelastic properties of rubber and rubber-like materials at low temperatures. This test method is useful when employed in conjunction with other low-temperature tests for selection of materials suitable for low-temperature service.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 11
|
| DocumentType |
Redline
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| SAE AMS 7254 : 2014 | PERFLUOROETHER ELASTOMER |
| SAE AMS 3331 : 2017 | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 65 - 75 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| SAE AIR 1387 : 2016 | DESIGNING WITH ELASTOMERS FOR USE AT LOW TEMPERATURES, NEAR OR BELOW GLASS TRANSITION |
| SAE AMS 3310 : 2007 | RUBBER, SILICONE FLAME RETARDANT, LOW SMOKE DENSITY, HIGH STRENGTH 65 - 75 DUROMETER COLOR WHITE |
| SAE AMS 3218D : 2017 | ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET 85 TO 95 |
| SAE AMS 7259 : 2013 | RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
| SAE AMS R 25988 : 2017 | RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| SAE J 200 : 2015 | CLASSIFICATION SYSTEM FOR RUBBER MATERIALS |
| SAE AMS 7269 : 2003 | RINGS, SEALING, SILICONE (PVMQ) RUBBER - LOW OUTGASSING, SPACE AND VACUUM SERVICE, 45-55 |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| SAE AMS 3216 : 2017 | ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE - FLUID RESISTANT LOW COMPRESSION SET 70 TO 80 |
| ASTM D 3847 : 2001 : R2012 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ASTM D 3847 : 2001 : R2018 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
| ASTM D 3847 : 2001 | Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM D 2000 : 2012 | Standard Classification System for Rubber Products in Automotive Applications |
| SAE J 2884 : 2014 | THERMOSET ELASTOMER SPECIFICATION SYSTEM |
| SAE AMS 3329 : 2017 | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45-55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| MIL-DTL-83528 Revision H:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for |
| SAE AMS 3382 : 2017 | ELASTOMER: TETRAFLUOROETHYLENE/PROPYLENE (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 75 TO 90 HARDNESS |
| SAE AMS R 83248 : 2005 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| ASTM D 832 : 2007 : R2012 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| ASTM D 832 : 2007 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| MIL R 83322 : 0 | RUBBER, CARBOXY NITROSO, NITROGEN TETROXIDE (N204) RESISTANT |
| API 6J : 1992 | BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
| MIL-DTL-83397 Revision B:2009 | RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT |
| MIL-R-83283 Revision A:1991 | RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| SAE AMS R 7362 : 2012 | NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
| SAE AMS 7255 : 2014 | RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 70 TO 80 |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| SAE AMS 7256 : 2014 | RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 85 TO 95 |
| SAE AMS P 5315 : 2013 | ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70 |
| SAE AMS 3325 : 2014 | FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 55 - 65 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATION OILS |
| SAE AMS R 83283 : 2014 | RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| MIL R 83397 : A | RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT |
| MIL-DTL-3533 Revision C:2009 | RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| MIL-DTL-25988 Revision C:2006 | RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
| MIL R 3533 : B | RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED |
| SAE AMS R 83485 : 2014 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| SAE AMS 3328 : 2016 | FLUOROSILICONE (FVMQ) RUBBER, FUEL AND OIL RESISTANT, 35-45 |
| SAE J 1085 : 2017 | TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS |
| SAE AMS 7287 : 2012 | FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| SAE AMS 7257 : 2014 | PERFLUOROCARBON (FFKM) ENGINE OIL, FUEL AND HYDRAULIC FLUID RESISTANT 70 TO 80 HARDNESS FOR HIGH TEMPERATURE SEALS IN ENGINE OIL SYSTEMS, FUEL SYSTEMS AND HYDRAULIC SYSTEMS |
| SAE AMS 3330C : 2017 | ELASTOMER: FLUOROSILICONE (FVMQ) RUBBER FUEL AND OIL RESISTANT 45-55 FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS |
| SAE AMS 3384 : 2013 | Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems |
| SAE AMS 7272 : 2013 | RUBBER: BUTADIENE-ACRYLONITRILE (NBR) SYNTHETIC LUBRICANT RESISTANT 65 - 75 HARDNESS FOR SEALS IN SYNTHETIC LUBRICANT SYSTEMS |
| ASTM D 2000 : 2012 : R2017 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM D 3847 : 2001 : R2007 | Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM D 832 : 2007 : R2018 | Standard Practice for Rubber Conditioning For Low Temperature Testing |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.