ASTM D 1349 : 2014 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Rubber—Standard Conditions for Testing
11-11-2014
English
07-01-2014
CONTAINED IN VOL. 09.01, 2015 Defines a list of standard temperatures from which selection may be made for any specific test or test method.
1.1Reliable comparisons between different rubber compounds and between different laboratories is an essential component of effective testing.
1.2It is necessary to standardize the temperature and humidity conditions to which materials are subjected prior to and during testing.
1.3Section 2 of this practice includes the definition of terms commonly used to describe the conditions of testing.
1.4Section 3 of this practice covers a list of standard test temperatures for testing from which selection may be made for a specification, procedure, practice, standard or method.
1.4.1Any specification, procedure, practice, standard or method that specifies test temperatures shall take precedence over this practice.
1.4.2The standard test temperatures for testing do not apply to preparation, mixing, processing, or vulcanizing temperatures for rubber compounds.
1.5Section 4 of this practice covers a list of standard relative humidity conditions for testing from which selection may be made for a specification, procedure, practice, standard or method.
1.5.1Any specification, procedure, practice, standard or method that specifies relative humidity shall take precedence over this practice.
1.5.2The standard relative humidity conditions for testing do not apply to preparation, mixing, processing, or vulcanizing of rubber compounds, but may serve as a guide when the condition is not specified.
1.6Section 5 of this practice covers the standard conditioning of materials for testing.
1.6.1Any specification, procedure, practice, standard or method that specifies the conditioning of materials for testing shall take precedence over this practice.
1.7Section 6 of this practice includes the keywords associated with this document which may be used in standard document or internet searches.
1.8The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 11
|
| DocumentType |
Redline
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| CCC-C-700 Revision J:1986 | CLOTH, COATED, VINYL COATED (ARTIFICIAL LEATHER) |
| ASTM D 3854 : 1990 : R2010 | Standard Test Method for Rubber Thread-Resistance to Dry Heat (Withdrawn 2016) |
| ASTM F 2468 : 2005 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 5099 : 2008 : R2017 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
| ASTM D 3903 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems |
| ASTM F 2042 : 2000 : R2005 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM D 1456 : 1986 : R2005 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 624 : 2000 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 6147 : 1997 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer-Determination of Force Decay (Stress Relaxation) in Compression |
| SAE J 2884 : 2014 | THERMOSET ELASTOMER SPECIFICATION SYSTEM |
| MIL-PRF-17927 Revision D:2004 | Gaskets, Flame Resistant Hinged Closure |
| MIL-H-62217 Revision A:1981 | HOSE AND HOSE ASSEMBLIES, NON METALLIC, SILICONE, POLYESTER AND WIRE REINFORCED (FOR COOLANT AND HEATING SYSTEMS OF DIESEL & GASOLINE POWERED ENGINES) |
| MIL G 17927 : C | GASKET, ASBESTOS METALLIC COVER, RUBBER CORE |
| ASTM D 6746 : 2015 : REDLINE | Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds |
| ASTM D 430 : 2006 : EDT 1 | Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
| ASTM D 5289 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
| ASTM D 751 : 2006 : R2011 | Standard Test Methods for Coated Fabrics |
| ASTM D 624 : 2000 : R2007 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 3952 : 1987 : R1993 | Specification for Rubber Hose Used in Solar Energy Systems (Withdrawn 1997) |
| ASTM F 1035 : 2003 : R2015 | Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System |
| ASTM D 624 : 2000 : EDT 1 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 573 : 2004 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM D 1456 : 1986 : R2014 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 2231 : 1994 | Standard Practice for Rubber Properties in Forced Vibration (Withdrawn 1998) |
| ASTM D 1052 : 2009 | Standard Test Method for Measuring Rubber Deterioration-Cut Growth Using Ross Flexing Apparatus |
| ASTM G 114 : 2014 : REDLINE | Standard Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service |
| ASTM D 6515 : 2000 : R2009 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM F 1957 : 1999 : R2017 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
| ASTM D 813 : 2007 : R2014 | Standard Test Method for Rubber Deterioration—Crack Growth |
| ASTM D 5099 : 2008 : R2013 | Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry |
| ASTM F 1035 : 2003 | Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System |
| ASTM D 573 : 2004 : R2010 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM D 751 : 2006 | Standard Test Methods for Coated Fabrics |
| ASTM D 430 : 2006 : R2012 | Standard Test Methods for Rubber Deterioration—Dynamic Fatigue |
| ASTM D 2084 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
| ASTM F 2051 : 2000 : R2014 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM D 623 : 2007 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
| ASTM D 1415 : 2006 : R2012 | Standard Test Method for Rubber Property—International Hardness |
| SAE J 2979 : 2012 | TEST METHOD FOR VULCANIZED RUBBER AND THERMOPLASTIC ELASTOMER DETERMINATION OF COMPRESSIVE STRESS RELAXATION (CSR) RESPONSE |
| ASTM D 3771 : 2015 : REDLINE | Standard Specification for Rubber Seals Used in Concentrating Solar Collectors |
| ASTM D 1415 : 2006 | Standard Test Method for Rubber Property—International Hardness |
| NACE TM 02 97 : 2017 | EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS |
| ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM F 2042 : 2000 : EDT 1 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| SAE J 200 : 2015 | CLASSIFICATION SYSTEM FOR RUBBER MATERIALS |
| ASTM D 1456 : 1986 : R2001 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM D 7121 : 2005 | Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum |
| ASTM D 3832 : 1979 : R2017 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 3832 : 1979 : R2006 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 865 : 2011 | Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 3389 : 2016 : REDLINE | Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader) |
| ASTM F 2042 : 2000 : R2011 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication |
| ASTM D 2000 : 2012 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 2042 : 2000 | Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication |
| ASTM D 573 : 2004 : R2015 | Standard Test Method for Rubber—Deterioration in an Air Oven |
| ASTM F 2468 : 2005 : R2011 | Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
| ASTM D 3832 : 1979 : R2011 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 3832 : 1979 : R2001 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM F 1957 : 1999 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
| ASTM D 3832 : 1979 : R1997 : EDT 1 | Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems |
| ASTM D 531 : 2015 : REDLINE | Standard Test Method for Rubber Property—Pusey and Jones Indentation |
| ASTM D 6147 : 1997 : R2008 : EDT 1 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer<span class='unicode'>—</span>Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM F 1957 : 1999 : R2011 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
| MIL-C-43285 Revision C:1986 | CLOTH, COATED (CHLOROPRENE BASE COATED, CHLOROSULPHONATED POLYETHYLENE TOP COATED) |
| ASTM D 3854 : 1990 : R2005 | Standard Test Method for Rubber Thread-Resistance to Dry Heat |
| SAE J 2643 : 2013 | STANDARD REFERENCE ELASTOMERS (SRE) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| SAE J 1085 : 2017 | TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS |
| ASTM D 4060 : 2014 : REDLINE | Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser |
| ASTM D 1460 : 1986 : R2001 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 1460 : 1986 : R2005 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 1052 : 2009 : R2014 | Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus |
| ASTM D 430 : 2006 | Standard Test Methods for Rubber Deterioration-Dynamic Fatigue |
| ASTM D 7605 : 2011 | Standard Test Method for Thermoplastic Elastomers<char: emdash>Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers |
| ASTM D 1460 : 1986 : R2014 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 624 : 2000 : R2012 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM E 1027 : 1992 | Practice for Exposure of Polymeric Materials to Ionizing Radiation (Withdrawn 1996) |
| ASTM D 6515 : 2000 : R2016 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM F 2051 : 2000 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM F 1957 : 1999 : R2004 | Standard Test Method for Composite Foam Hardness-Durometer Hardness |
| ASTM D 623 : 2007 : R2014 | Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression |
| ASTM D 6515 : 20001 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 7605 : 2011 : R2016 | Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers |
| ASTM F 1441 : 2003 | Standard Specification for Soft-Tissue Expander Devices |
| ASTM D 6515 : 2000 : R2010 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 1460 : 1986 : R1997 : EDT 1 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM F 1035 : 2003 : R2008 | Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System |
| ASTM D 5099 : 2008 | Standard Test Methods for Rubber<span class='unicode'>—</span>Measurement of Processing Properties Using Capillary Rheometry |
| ASTM F 604 : 1994 | Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001) |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 1460 : 1986 : R2010 | Standard Test Method for Rubber Property—Change in Length During Liquid Immersion |
| ASTM D 813 : 2007 | Standard Test Method for Rubber Deterioration-Crack Growth |
| ASTM D 1630 : 2016 : REDLINE | Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader) |
| SAE J 1183 : 2017 | RECOMMENDED GUIDELINES FOR FATIGUE TESTING OF ELASTOMERIC MATERIALS AND COMPONENTS |
| ASTM D 3854 : 1990 : R2000 | Standard Test Method for Rubber Thread-Resistance to Dry Heat |
| ASTM F 1441 : 2003 : R2009 | Standard Specification for Soft-Tissue Expander Devices |
| ASTM D 2000 : 2012 : R2017 | Standard Classification System for Rubber Products in Automotive Applications |
| ASTM F 703 : 2018 | Standard Specification for Implantable Breast Prostheses |
| ASTM D 6147 : 1997 : R2014 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM D 6147 : 1997 : R2002 | Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM D 1456 : 1986 : R2010 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
| ASTM F 2051 : 2000 : R2006 | Standard Specification for Implantable Saline Filled Breast Prosthesis |
| ASTM D 3667 : 2016 : REDLINE | Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors |
| ASTM F 1441 : 2003 : R2014 | Standard Specification for Soft-Tissue Expander Devices |
| ASTM D 7121 : 2005 : R2012 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
| ASTM D 6515 : 2000 : R2004 | Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending |
| ASTM D 6147 : 1997 : R2008 | Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer<span class='unicode'>—</span>Determination of Force Decay (Stress Relaxation) in Compression |
| ASTM D 1456 : 1986 : R1996 | Standard Test Method for Rubber Property—Elongation at Specific Stress |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.