ASTM D 1414 : 2015 : REDLINE
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Test Methods for Rubber O-Rings
Available format(s)
PDF
Superseded date
12-31-2022
Language(s)
English
Published date
09-24-2015
CONTAINED IN VOL. 09.02, 2015 Specifies the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
1.1These test methods describe the procedures for determining the physical properties of O-rings and changes in these properties due to aging.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 11
|
| DocumentType |
Redline
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| API 6A REDLINE : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| 13/30276381 DC : 0 | BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS |
| SAE AMS R 83485 : 2014 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| SAE AIR 851 : 2014 | O-RING TENSION TESTING CALCULATIONS |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE; RUBBER SHEET SOLID |
| API 6A CHINESE : 2011 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| SAE AIR 4738 : 2013 | HARDNESS TESTING OF ELASTOMERIC O-RINGS |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| API SPEC 19TT : 2016 | SPECIFICATION FOR DOWNHOLE WELL TEST TOOLS AND RELATED EQUIPMENT |
| SAE AMS 7259 : 2013 | RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS |
| ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| PREN 3747 : 200P1 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| I.S. EN ISO 28781:2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| ASTM E 1069 : 1985 : R2003 | Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress |
| SAE AMS R 25988 : 2017 | RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| SAE AMS 7269 : 2003 | RINGS, SEALING, SILICONE (PVMQ) RUBBER - LOW OUTGASSING, SPACE AND VACUUM SERVICE, 45-55 |
| ASTM F 152 : 1995 : R2002 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| CSA B1800 SERIES : 2015 | THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM |
| ASTM F 913 : 2002 : EDT 1 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM F 152 : 1995 : R2009 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| BS EN 3747:2007 | Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification |
| 11/30189460 DC : 0 | BS IEC 62582-3 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS - PART 3: ELONGATION AT BREAK |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| BS ISO 3601-5:2015 | Fluid power systems. O-rings Specification of elastomeric materials for industrial applications |
| SAE AMS P 25732 : 1998 | PACKAGING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, LIMITED SERVICE AT 275 DEGREES F (135 DEGREES C) |
| SAE AMS7338A : 2013 | RUBBER: BUTYL (IIR ABBREVIATION), PHOSPHATE ESTER RESISTANT, 65 TO 75 HARDNESS, FOR SEALS IN HYDRAULIC SYSTEMS, ETC. |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL P 81716 : 0 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F) |
| XP PREN 3747 : 1995 XP | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| MIL-DTL-81716 Revision A:2009 | PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
| API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| ASTM F 913 : 2002 : R2008 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM D 711 : 2010 : R2015 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
| SAE AMS R 83248 : 2005 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| ASTM E 1069 : 1985 : R1996 : EDT 1 | Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| ISO 13628-4:2010 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 4: Subsea wellhead and tree equipment |
| ASHRAE GUIDELINE 6 : 2015 | REFRIGERANT INFORMATION RECOMMENDED FOR PRODUCT DEVELOPMENT AND STANDARDS |
| I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| I.S. EN ISO 10423:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN 3747:2007 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| NF EN ISO 10423 : 2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| SAE AMS 7260 : 2001 | RINGS, BUTADIENE-ACRYLONITRILE (NBR) RUBBER, MOLDED FUEL AND LOW TEMPERATURE RESISTANT 70 - 80 |
| SAE AMS 7254 : 2014 | PERFLUOROETHER ELASTOMER |
| 13/30290592 DC : 0 | BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| ASTM F 913 : 2002 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| NACE TM 01 87 : 2011 | EVALUATING ELASTOMERIC MATERIALS IN SOUR GAS ENVIRONMENTS |
| ASTM D 6546 : 2015 : REDLINE | Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| MIL-STD-1622 Revision B:1999 | STANDARD PRACTICE FOR CLEANING OF SHIPBOARD COMPRESSED AIR SYSTEMS |
| API 6A : 2010 | SPECIFICATION FOR WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| NACE TM 02 97 : 2017 | EFFECTS OF HIGH-TEMPERATURE, HIGH-PRESSURE CARBON DIOXIDE DECOMPRESSION ON ELASTOMERIC MATERIALS |
| SAE AMS R 7362 : 2012 | NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| SAE AMS 7255 : 2014 | RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 70 TO 80 |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| SAE AMS 7256 : 2014 | RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 85 TO 95 |
| SAE AMS 7267 : 2001 | RINGS, SEALING, SILICONE (VSI) RUBBER, HEAT RESISTANT, LOW COMPRESSION SET, 70-80 |
| SAE AMS P 5315 : 2013 | ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70 |
| API 19V : 2013 | SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| ASTM F 152 : 1995 : R2017 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 913 : 2002 : R2014 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining<brk/> Plastic Pipe |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| API 6RS : 1ED 90 SUPP 1 | BULLETIN ON REFERENCED STANDARDS FOR COMMITTEE 6, STANDARDIZATION OF VALVES AND WELLHEAD EQUIPMENT |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN ISO 28781 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE BARRIER VALVES AND RELATED EQUIPMENT |
| CSA B182.7 : 2006 | PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT |
| SAE AMS 7261 : D2001 | RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER, HIGH-TEMPERATURE-FLUID-RESISTANT |
| API 16RCD RUSSIAN : 2005 | SPECIFICATION FOR DRILL THROUGH EQUIPMENT - ROTATING CONTROL DEVICES |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| SAE AMS 7264 : 2007 | RINGS, SEALING, SILICONE RUBBER, HIGH TEMPERATURE RESISTANT, LOW COMPRESSION SET, 65 - 75 |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| MIL-PRF-32287 Revision A:2011 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| MIL-DTL-25988 Revision C:2006 | RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
| 14/30302298 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| 13/30290460 DC : 0 | BS ISO 9940 - AEROSPACE SERIES - FLUID, HYDRAULIC, PHOSPHATE ESTER-BASE, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| API SPEC 16RCD : 2015 | SPECIFICATION FOR ROTATING CONTROL DEVICES |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
| MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| PREN 6111 : 200P1 | AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| SAE AMS 7262 : C2001 | RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER, PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT, 85-95 |
| ASTM ES 27 : 1994 | Practice for Rubber-Establishing Replacement Immersion Reference Oils for ASTM No. 2 and No. 3 Imersion Oils as Used in D-471 ( Withdrawn 1995) |
| SAE AMS 7266 : 2001 | RINGS, SEALING, FLUOROCARBON RUBBER, GENERAL PURPOSE, HIGH TEMPERATURE, FUEL AND OIL RESISTANT 65 - 75 |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| SAE AMS 7258 : 2001 | RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT, LOW SHRINKAGE 65-75 |
| API 17D REDLINE : 2011 | DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| SAE AS 6414 : 2017 | MANUFACTURING PROCESSING REQUIREMENTS FOR MOLDED ELASTOMER COMPONENTS USED IN AEROSPACE APPLICATIONS |
| ASTM F 152 : 1995 | Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| SAE AMS 7287 : 2012 | FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS |
| ASTM E 1069 : 1985 : R2009 | Standard Test Method for Testing Polymeric Seal Materials for Geothermal and/or High Temperature Service Under Sealing Stress (Withdrawn 2018) |
| ISO 3601-5:2015 | Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications |
| EN ISO 13628-4:2010/AC:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 4: SUBSEA WELLHEAD AND TREE EQUIPMENT |
| BS EN 3050:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| BS EN ISO 10423:2009 | Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM |
| ISO 10423:2009 | Petroleum and natural gas industries Drilling and production equipment Wellhead and christmas tree equipment |
| ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
| EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 10423:2009 | Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2009) |
| EN 3747:2007 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification |
| EN ISO 28781:2010 | Petroleum and natural gas industries - Drilling and production equipment - Subsurface barrier valves and related equipment (ISO 28781:2010) |
| EN 3050:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification |
| BS EN ISO 28781:2010 | Petroleum and natural gas industries. Drilling and production equipment. Subsurface barrier valves and related equipment |
| BS IEC/IEEE 62582-3:2012 | Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Elongation at break |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| NACE TM 02 96 : 2014 | EVALUATING ELASTOMERIC MATERIALS IN SOUR LIQUID ENVIRONMENTS |
| SAE AMS 7274 : 2014 | RUBBER: BUTADIENE-ACRYLONITRILE (NBR), 65 TO 75 HARDNESS, FOR ELASTOMERIC SEALS IN AIRCRAFT ENGINE OIL SYSTEMS |
| 14/30314166 DC : 0 | BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| API 6J : 1992 | BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| SAE ARP 6179 : 2011 | EVALUATION OF GAS TURBINE ENGINE LUBRICANT COMPATIBILITY WITH ELASTOMER O-RINGS |
| SAE AMS 7284 : 2016 | RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT |
| SAE AMS 7257 : 2014 | PERFLUOROCARBON (FFKM) ENGINE OIL, FUEL AND HYDRAULIC FLUID RESISTANT 70 TO 80 HARDNESS FOR HIGH TEMPERATURE SEALS IN ENGINE OIL SYSTEMS, FUEL SYSTEMS AND HYDRAULIC SYSTEMS |
| PREN 6109 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| SAE AMS 7272 : 2013 | RUBBER: BUTADIENE-ACRYLONITRILE (NBR) SYNTHETIC LUBRICANT RESISTANT 65 - 75 HARDNESS FOR SEALS IN SYNTHETIC LUBRICANT SYSTEMS |
| SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
| API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| SAE ARP4912C:2017 | DESIGN RECOMMENDATIONS FOR SPARE SEALS IN LANDING GEAR SHOCK STRUTS |
| SAE AMS 7265 : 2001 | RINGS, SEALING, ETHYLENE PROPYLENE RUBBER, PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT, 75-85 |
| ASTM D 5964 : 2016 : REDLINE | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| SAE AMS 7268 : 2001 | RINGS, SEALING-SILICONE RUBBER LOW COMPRESSION SET, NON-OIL RESISTANT 65 - 75 |
| ASTM D 711 : 2010 | Standard Test Method for No-Pick-Up Time of Traffic Paint |
| EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| BS EN ISO 13628-4:1999 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea wellhead and tree equipment |
| ISO 28781:2010 | Petroleum and natural gas industries Drilling and production equipment Subsurface barrier valves and related equipment |
| BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
| SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| ASTM D 865 : 2011 | Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure) |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
US$83.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.