|
(INVALID RECORD)ASTM D 116 : 1986
|
TEST METHODS FOR VITRIFIED CERAMIC MATERIALS FOR ELECTRICAL APPLICATIONS |
|
ASTM D 3018/D3018M : 2011
|
Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules |
|
ASTM F 636 : 1985 : R1991
|
Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996) |
|
DOD I 24683 : 1987
|
INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
|
SAE AMS 3662 : 2015
|
POLYTETRAFLUOROETHYLENE FILM, GENERAL PURPOSE GRADE |
|
ASTM D 1932 : 2013-04
|
TEST METHOD FOR THERMAL ENDURANCE OF FLEXIBLE ELECTRICAL INSULATING VARNISHES |
|
ASTM D 1674 : 67(1977)
|
METHOD OF TESTING POLYMERIZABLE EMBEDDING COMPOUNDS USED FOR ELECTRICAL INSULATION |
|
ASTM D 5213 : 2012-12
|
SPECIFICATION FOR POLYMERIC RESIN FILM FOR ELECTRICAL INSULATION AND DIELECTRIC APPLICATIONS |
|
ASTM F 712 : 2006 : R2011
|
Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
SAE AMS 3650 : 2012
|
RODS, SHEETS, AND MOLDED SHAPES, POLYCHLOROTRIFLURORETHYNEN (PCTFE) UNPLASTICIZED |
|
ASTM D 2275 : 2014 : REDLINE
|
Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface |
|
MIL C 22627 : 0
|
COATING, CONFORMAL, RESIN |
|
MIL C 47224 : B
|
COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT |
|
MIL I 23594 : C
|
INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE |
|
ASTM D 3426 : 1997
|
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves |
|
ASTM D 5948 : 2005 : R2012
|
Standard Specification for Molding Compounds, Thermosetting |
|
MIL N 6748 : A
|
NIPPLE, ELECTRICAL TERMINAL |
|
L C 530 : C
|
COATING, PIPE, THERMOPLASTIC RESIN |
|
ASTM D 1675 : 2003
|
TEST METHODS FOR POLYTETRAFLUOROETHYLENE TUBING |
|
ASTM F 2320 : 2011-06
|
SPECIFICATION FOR RUBBER INSULATING SHEETING |
|
(INVALID RECORD)ASTM D 2442 : 1975
|
SPECIFICATION FOR ALUMINA CERAMICS FOR ELECTRICAL AND ELECTRONIC APPLICATIONS |
|
SAE AMS 3210 : 2017
|
CHLOROPRENE (CR) RUBBER ELECTRICAL RESISTANT 65 - 75 |
|
ASTM F 1826 : 2000 : R2016
|
Standard Specification for Live Line and Measuring Telescoping Tools |
|
MIL I 23053 : D
|
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
|
SAE AMS 3669 : 2012
|
POLYTETRAFLUOROETHYLENE (PTFE) SHEET, MOLDED, PREMIUM GRADE, AS SINTERED |
|
ASTM F 624 : 2009
|
GUIDE FOR EVALUATION OF THERMOPLASTIC POLYURETHANE SOLIDS AND SOLUTIONS FOR BIOMEDICAL APPLICATIONS |
|
07/30083514 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
|
IEEE DRAFT 404 : D13 2006
|
EXTRUDED AND LAMINATED DIELECTRIC SHIELDED CABLE JOINTS RATED 2500 V - 500 000 V |
|
ASTM D 1677 : 2017 : REDLINE
|
Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation |
|
ASTM F665 : 2009
|
CLASSIFICATION FOR VINYL CHLORIDE PLASTICS USED IN BIOMEDICAL APPLICATION |
|
MIL C 47027 : 0
|
COMPOUND, MOLDING, PLASTIC, RIGID, THERMOPLASTIC |
|
MIL P 47099 : A
|
POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS |
|
SAE J 2983 : 2012
|
RECOMMENDED PRACTICE FOR DETERMINING MATERIAL PROPERTIES OF LI-BATTERY SEPARATOR |
|
MIL I 46838 : B
|
INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
|
SAE AMS 3658 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, PREMIUM STRENGTH, SINTERED AND STRESS-RELIEVED, RADIOGRAPHICALLY INSPECTED |
|
ASTM D 178 : 2001 : EDT 1
|
Standard Specification for Rubber Insulating Matting |
|
MIL P 46112 : B
|
PLASTIC SHEET & STRIP, POLYMIDE |
|
ASTM D 352 : 1997
|
Standard Test Methods for Pasted Mica Used in Electrical Insulation |
|
NBR 15221-3 : 2015
|
STEEL PIPES - EXTERNAL CORROSION-RESISTANT COATING - PART 3: FUSION BONDED EPOXY |
|
ASTM D 1389 : 2007-06
|
TEST METHOD FOR PROOF-VOLTAGE TESTING OF THIN SOLID ELECTRICAL INSULATING MATERIALS |
|
ASTM F 1826 : 2000 : R2006
|
Standard Specification for Live Line and Measuring Telescoping Tools |
|
MIL S 8660 : C
|
SILICONE COMPOUND, NATO CODE NUMBER S 736 |
|
ASTM D 2442 : 1975 : R1996
|
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
|
14/30300605 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
|
ASTM D 116 : 1986 : R1999
|
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications |
|
ANSI/AWWA C229 : 2015
|
FUSION-BONDED POLYETHYLENE COATINGS FOR STEEL WATER PIPE AND FITTINGS |
|
ASTM F 968 : 1993 : R1998
|
Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
ASTM D 178 :
|
SPECIFICATION FOR RUBBER INSULATING MATTING |
|
I.S. EN ISO 21809-3:2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
|
SAE ARP 5724 : 2013
|
AEROSPACE - TESTING OF ELECTROMECHANICAL ACTUATORS, GENERAL GUIDELINES FOR |
|
MIL M 24325 : 0
|
MOLDING MATERIAL PLASTIC, EPOXY COMPOUNDS THERMOSETTING |
|
ASTM D 3756 : 1997
|
Standard Test Method for Evaluation of Resistance To Electrical Breakdown By Treeing In Solid Dielectric Materials Using Diverging Fields |
|
MIL T 47023 : 0
|
TAPE, HEAT SHRINKABLE |
|
SAE AMS 3667 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) SHEET, MOLDED, GENERAL PURPOSE GRADE, AS SINTERED |
|
ASTM D 349 : 2013 : REDLINE
|
Standard Test Methods for Laminated Round Rods Used for Electrical Insulation |
|
MIL I 24718 : 0
|
INSULATING RESINS, SOLVENTLESS, VACUUM-PRESSURE-IMPREGNATING - GENERAL SPECIFICATION FOR |
|
MIL A 46106 : B
|
ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
|
MIL S 23586 : E
|
SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
|
MIL W 22759 : E
|
WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
|
MIL T 47052 : 0
|
TAPE, EPOXY-GLASS CLOTH, THERMOSETTING, PRESSURE SENSITIVE ADHESIVE |
|
SAE AMS 3670/3 : 2004
|
POLYAMIDE-IMIDE BAR, ROD, AND SHAPES, 12% GRAPHITE - 3% POLYTETRAFLUOROETHYLENE FILLED |
|
BS EN ISO 21809-3 : 2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
|
ASTM D 3019 : 1994 : R2007
|
Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non Fibered, Asbestos Fibered, and Non Asbestos Fibered |
|
SAE AMS 3670 : 2003
|
POLYAMIDE-IMIDE BAR, ROD, & SHAPES, MOLDED OR EXTRUDED |
|
MIL S 8516 : F
|
SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
|
IEEE 1133 : 1988
|
APPLICATION GUIDE FOR EVALUATING NONCERAMIC MATERIALS FOR HIGH-VOLTAGE OUTDOOR APPLICATIONS |
|
NACE RP 03 75 : 2006
|
FIELD-APPLIED UNDERGROUND WAX COATING SYSTEMS FOR UNDERGROUND PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
|
SAE AMS 3731 : 2016
|
POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE |
|
ASTM F 2468 : 2005
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
ASTM F 1505 : 2016 : REDLINE
|
Standard Specification for Insulated and Insulating Hand Tools |
|
NEMA RN 1 : 2005(R2013)
|
POLYVINYL-CHLORIDE (PVC) EXTERNALLY COATED GALVANIZED RIGID STEEL CONDUIT AND INTERMEDIATE METAL CONDUIT |
|
MIL I 81550 : C
|
INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
|
ASTM D 2581 : 2009-08
|
CLASSIFICATION SYSTEM FOR POLYBUTYLENE (PB) PLASTICS MOLDING AND EXTRUSION MATERIALS |
|
AWWA C217 : 2016
|
MICROCRYSTALLINE WAX AND PETROLATUM TAPE COATING SYSTEMS FOR STEEL WATER PIPE AND FITTINGS |
|
AWWA C214 : 2014
|
TAPE COATINGS FOR STEEL WATER PIPE |
|
ASTM F 1579 : 2002
|
Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications |
|
CSA C22.2 No. 144 : 1991 :R2011
|
GROUND FAULT CIRCUIT INTERRUPTERS |
|
ASTM F 604 : 1994
|
Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001) |
|
IEEE 434 : 2006
|
FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
|
ASTM F 968 : 1993 : R2002 : EDT 1
|
Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers (Withdrawn 2008) |
|
ASTM D 4098 : 82(R1987)E1
|
PRACTICE FOR EVALUATING HIGH-DENSITY RIGID CELLULAR THERMOSETS |
|
ASTM D 3222 : 2005
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
ASTM F 1826 : 2000 : R2011
|
Standard Specification for Live Line and Measuring Telescoping Tools |
|
MIL I 81765 : A
|
INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
ASTM D 4923 : 2001
|
Standard Specification for Reinforced Thermosetting Plastic Poles (Withdrawn 2010) |
|
L P 380 : C
|
PLASTIC MOLDING MATERIAL METHACRYLATE |
|
ASTM D 3293 : 0
|
SPECIFICATION FOR PTFE RESIN MOLDED SHEET |
|
ASTM D 3294 : 2015 : REDLINE
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes |
|
NACE RP 03 03 : 2003
|
FIELD-APPLIED HEAT-SHRINKABLE SLEEVES FOR PIPELINES: APPLICATION, PERFORMANCE, AND QUALITY CONTROL |
|
ASTM F 1876 : 1998
|
Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications |
|
SAE AS 23053 : 2016
|
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
ASTM D 6040 : 2012-09
|
GUIDE TO STANDARD TEST METHODS FOR UNSINTERED POLYTETRAFLUOROETHYLENE (PTFE) EXTRUDED FILM OR TAPE |
|
ASTM F 624 : 2009
|
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications |
|
ASTM D 7745 : 2011
|
Standard Practice for Testing Pultruded Composites |
|
SAE AMS 3656 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, NORMAL STRENGTH, AS SINTERED |
|
CSA Z259.6 : 0
|
RUBBER INSULATING BLANKETS |
|
CSA C22.2 No. 0.17 : 2000 : R2004
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
ASTM D 7895/D7895M : 2014
|
Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems |
|
MIL A 46864 : B
|
ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT |
|
(INACTIVE RECORD) DIN EN ISO 12086-2:2006-05
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
|
15/30321951 DC : 0
|
BS ISO 20195 - STANDARD PRACTICE - GUIDE FOR DESIGN FOR ADDITIVE MANUFACTURING |
|
ASTM D 116 : 1986 : R2006
|
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications |
|
CSA Z259.5 : 0
|
RUBBER INSULATING SLEEVES |
|
MIL I 21070 : B
|
INSULATING SHEET AND TAPE, ELECTRICAL, REINFORCED MICA PAPER |
|
ASTM F 1826 : 2000
|
SPECIFICATION FOR LIVE LINE AND MEASURING TELESCOPING TOOLS |
|
ASTM F 1116 : 2014-04
|
TEST METHOD FOR DETERMINING DIELECTRIC STRENGTH OF DIELECTRIC FOOTWEAR |
|
MIL A 47040 : 0
|
ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE |
|
CSA C22.2 No. 269 PACKAGE : 2017
|
CONSISTS OF C22.2 NO. 269.1-17 - SURGE PROTECTIVE DEVICES - TYPE 1 - PERMANENTLY CONNECTED; C22.2 NO. 269.2-17 - SURGE PROTECTIVE DEVICES - TYPE 2 - PERMANENTLY CONNECTED; C22.2 NO. 269.3-17 - SURGE PROTECTIVE DEVICES - TYPE 3 - CORD CONNECTED, DIRECT PLUG-IN AND RECEPTACLE TYPE; C22.2 NO. 269.4-17 - SURGE PROTECTIVE DEVICES - TYPE 4 - COMPONENT ASSEMBLIES AND C22.2 NO. 269.5-17 - SURGE |
|
ASTM D 3426 : 1997 : R2004
|
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves |
|
SAE AMS P 46144 : 2015
|
PLASTIC SHEET, POLYCARBONATE |
|
CSA C22.2 No. 0.17 : 2000
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
MIL I 16923 : H
|
INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY |
|
MIL P 22241 : B
|
PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
|
MIL PRF 24712 : B
|
COATINGS, POWDER, THERMOSETTING |
|
ASTM D 3664 : 2016 : REDLINE
|
Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment |
|
NACE SP 01 09 : 2009
|
FIELD APPLICATION OF BONDED TAPE COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED METAL PIPELINES |
|
MIL P 47241 : 0
|
PRIMER, POLYURETHANE, ONE PART |
|
ASTM F 1826 : 2000
|
Standard Specification for Live Line and Measuring Telescoping Tools |
|
ASTM D 178 : 2001 : R2005
|
Standard Specification for Rubber Insulating Matting |
|
MIL P 20689 : D
|
PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
|
MIL PRF 8516 : G
|
SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS, CHEMICALLY CURED |
|
MIL P 24364 : 0
|
PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING SHEET, GLASS MAT |
|
ASTM D 5214 : 1993
|
TEST METHOD FOR POLYIMIDE RESIN FILM FOR ELECTRICAL INSULATION AND DIELECTRIC APPLICATIONS |
|
MIL DTL 81381 : C
|
WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
|
NBR 6529 : 1983
|
VERNIZES UTILIZADOS PARA ISOLACAO ELETRICA - ENSAIOS |
|
L P 523 : D
|
PLASTIC SHEET AND FILM, FEP-FLUOROCARBON, EXTRUDED |
|
NBR 15723-4 : 2010
|
IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 4: SPECIFICATION FOR POROUS POLYETHYLENE POLYMERS |
|
MIL PRF 62563 : B
|
FAN, VENTILATING, VEHICULAR COMPARTMENT |
|
MIL R 47004 : 0
|
RESIN, EPOXY BASE, THIXOTROPIC |
|
ASTM D 2341 : 1981
|
Specification for Rigid Urethane Foam (Withdrawn 1988) |
|
16/30338304 DC : 0
|
BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS |
|
DIN EN ISO 12086-2 E : 2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
|
MIL I 24092 : D
|
INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
|
SAE AS 85080 : 2012
|
INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
|
NBR 15723-9 : 2010
|
IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 9: CRITERIA FOR DEFINITION AND DESCRIPTION OF THERMOSET EPOXY PLASTICS |
|
ASTM D 1710 : 2015 : REDLINE
|
Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes |
|
MIL I 3190 : F
|
INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
|
ADS-13F-HDBK : 1997
|
AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
|
ASTM D 2381 : 1987
|
TEST METHODS FOR FLEXIBLE COMPOSITE MATERIALS USED FOR ELECTRICAL INSULATION |
|
NACE RP 01 85 : 0
|
EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE |
|
AWWA C215 : 2016
|
EXTRUDED POLYOLEFIN COATINGS FOR STEEL WATER PIPE |
|
MIL I 13548 : A
|
INSULATION SLEEVING, ELECTRICAL (CABLE SPLICING) FT-96, FT-97, FT-98, AND FT-472 |
|
MIL I 46894 : 0
|
INSULATION PAPER, ASBESTOS CHYSOLITE |
|
ASTM F 1837M : 1997 : R2007
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
ASTM F 942 : 2002
|
Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
|
ASTM F 968 : 1993
|
SPECIFICATION FOR ELECTRICALLY INSULATING PLASTIC GUARD EQUIPMENT FOR PROTECTION OF WORKERS |
|
IEC TR 62354 : 3.0
|
GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
|
ASTM F 1876 : 1998 : R2003 : EDT 1
|
Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012) |
|
MIL P 46122 : B
|
PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER |
|
SAE AS 8660 : 1999
|
SILICONE COMPOUND NATO CODE NUMBER S-736 |
|
MIL R 47025 : A
|
RESIN, CASTING, FIRE RETARDANT, EPOXY BASE |
|
ASTM D 116 : 1986 : R2011
|
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications |
|
MIL P 38268 : C
|
AURAL PROTECTORS, SOUND |
|
GGG H 001347 : 0
|
HOT LINE STICKS |
|
MIL P 47104 : A
|
POTTING COMPOUND, EPOXY RESIN, THERMOSETTING |
|
MIL C 47121 : 0
|
COMPOUND, SEALING, POLYSULFIDE RUBBER |
|
ASTM D 178 : 2001 : R2010
|
Standard Specification for Rubber Insulating Matting |
|
CSA C22.2 No. 144 : 1991 : R2011
|
GROUND FAULT CIRCUIT INTERRUPTERS |
|
ASTM F 1837M : 1997
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
ASTM D 1868 : 2013 : REDLINE
|
Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
|
ASTM D 115 : 2017 : REDLINE
|
Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
|
MIL DTL 23053 : E
|
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
ASTM PS 2 : 1994
|
Specification for Molding Plastics, Electrical, Thermoplastic (Withdrawn 1997) |
|
MIL PRF 32293 : 0
|
CAP, BLASTING, ELECTRIC - M6 |
|
MIL R 45036 : D
|
RUBBER, HARD,(EBONITE) NATURAL OR SYNTHETIC, SHEET, STRIP, ROD, TUBING AND MOLDED PARTS |
|
IEEE DRAFT 516 : D6 DEC 94
|
IEEE GUIDE FOR MAINTENANCE METHODS ON ENERGIZED POWER-LINES |
|
MIL PRF 23586 : F
|
SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL |
|
ASTM F 790 : 2008
|
Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
|
ASTM D 2671 : 2013
|
Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use |
|
SAE AMS 3811 : 2016
|
RODS, ARAMID FIBER, POLYESTER RESIN COATED, PULTRUSION |
|
ASTM D 6411/D6411M:1999
|
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
|
CSA C22.2 No. 0.17 : 2000:R2013
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
SAE AMS 3613 : 2016
|
FILM, COPPER CLAD POLYESTER |
|
ASTM F 635 : 1985 : R1991
|
Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996) |
|
ASTM D 5948 : 2005
|
Standard Specification for Molding Compounds, Thermosetting |
|
ASTM D 704 : 1999
|
Standard Specification for Melamine-Formaldehyde Molding Compounds |
|
ASTM D 3222:2005
|
SPECIFICATION FOR UNMODIFIED POLY(VINYLIDENE FLUORIDE) (PVDF) MOLDING EXTRUSION AND COATING MATERIALS |
|
NBR 15723-3 : 2010
|
IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 3: SPECIFICATION FOR POLYARYLETHERKETONE (PAEK) POLYMERS |
|
MIL PRF 47009 : D
|
COMPOUND, SILICONE, HEAT SINK |
|
MIL P 46185 : 0
|
PLASTIC MOLDING & EXTRUSION MATERIALS, POLYETHERSULFONE |
|
CSA C22.2 No. 269.3 : 2017
|
SURGE PROTECTIVE DEVICES - TYPE 3 - CORD CONNECTED, DIRECT PLUG-IN AND RECEPTACLE TYPE |
|
IEEE 386 : 2016
|
SEPARABLE INSULATED CONNECTOR SYSTEMS FOR POWER DISTRIBUTION SYSTEMS RATED 2.5 KV THROUGH 35 KV |
|
MIL A 82802 : 0
|
ADHESIVE AND SEALANT |
|
04/30091870 DC : DRAFT FEB 2004
|
BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
|
MIL P 46184 : 0
|
PLASTIC MOLDING & EXTRUSION MATERIAL, POLYETHERIMIDE (PEI) |
|
ASTM D 2304 : 2010-10
|
TEST METHOD FOR THERMAL ENDURANCE OF RIGID ELECTRICAL INSULATING MATERIALS |
|
SAE AS 5258 : 2012
|
INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
|
CSA C22.2 No. 144 : 1991 : R2015
|
GROUND FAULT CIRCUIT INTERRUPTERS |
|
MIL I 47049 : 0
|
INSULATION TUBING, SILICONE RUBBER, HEAT SHRINKABLE |
|
ASTM D 6411/D6411M : 1999
|
SPECIFICATION FOR SILICONE RUBBER ROOM TEMPERATURE VULCANIZING LOW OUTGASSING MATERIALS |
|
ASTM F 2820 : 2012
|
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications |
|
(INACTIVE RECORD)ASTM D 705 : 1999
|
SPECIFICATION FOR UREA-FORMALDEHYDE MOLDING COMPOUNDS |
|
ASTM D 1676 : 2017 : REDLINE
|
Standard Test Methods for Film-Insulated Magnet Wire |
|
ASTM D 178 : 2001
|
Standard Specification for Rubber Insulating Matting |
|
MIL I 85080 : 1977
|
INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
|
SAE AMS 3657 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, PREMIUM STRENGTH, AS SINTERED |
|
NBR 15643 : 2014
|
POLYMERIC INSULATORS FOR INDOOR AND OUTDOOR USE WITH NOMINAL VOLTAGE GREATER THAN 1000 V - DESIGN TESTS |
|
SAE AMS 8660 : 2018
|
SILICONE COMPOUND NATO CODE NUMBER S-736 |
|
ASTM D 2442 : 1975 : R2012
|
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
|
ASTM D 3151 : 1988
|
TEST METHOD FOR THERMAL FAILURE OF SOLID ELECTRICAL INSULATING MATERIALS UNDER ELECTRIC STRESS |
|
MIL P 47271 : A
|
PAPER, INSULATING, ELECTRICAL |
|
L P 1041 : A
|
PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER |
|
ASTM F 602 : 2009
|
CRITERIA FOR IMPLANTABLE THERMOSET EPOXY PLASTICS |
|
MIL P 997 : D
|
PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
|
MIL P 46133 : A
|
PLASTIC MOLDING AND EXTRUSION MATERIAL, POLY (ARYL SULFONE ETHER) RESIN, THERMOPLASTIC |
|
ASTM D 178 : 2001 : EDT 2
|
Standard Specification for Rubber Insulating Matting |
|
NACE RP 01 05 : 2005
|
LIQUID-EPOXY COATINGS FOR EXTERNAL REPAIR, REHABILITATION, AND WELD JOINTS ON BURIED STEEL PIPELINES |
|
ASTM F 624 : 2009 : R2015 : EDT 1
|
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications |
|
MIL R 47211 : A
|
RUBBER, SILICONE, ROOM TEMPERATURE CURING |
|
CSA C22.2 No. 144 : 1991
|
GROUND FAULT CIRCUIT INTERRUPTERS |
|
ASTM D 3755 : 2014-07
|
TEST METHOD FOR DIELECTRIC BREAKDOWN VOLTAGE AND DIELECTRIC STRENGTH OF SOLID ELECTRICAL INSULATING MATERIALS UNDER DIRECT-VOLTAGE STRESS |
|
AWWA C209 : 2013
|
COLD-APPLIED TAPE COATINGS FOR STEEL WATER PIPE, SPECIAL SECTIONS, CONNECTIONS, AND FITTINGS |
|
SAE AMS DTL 23053 : 1999
|
INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
GOST R 52714:2018
|
Motor gasolines. Determination of individual and group hydrocarbon composition by capillary gas сhromatography method |
|
IEC 62539 : 1.0
|
GUIDE FOR THE STATISTICAL ANALYSIS OF ELECTRICAL INSULATION BREAKDOWN DATA |
|
ASTM D 5205 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
|
(INACTIVE RECORD)ASTM D 5948 : 2005
|
SPECIFICATION FOR MOLDING COMPOUNDS, THERMOSETTING |
|
ASTM F 942 : 2002 : R2013
|
Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
|
ASTM D 1999 : 1996
|
GUIDE FOR SELECTION OF SPECIMENS AND TEST PARAMETERS FROM ISO/IEC STANDARDS |
|
ASTM D 3222 : 2005 : R2015
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
SAE AS 22759 : 2014
|
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
|
SAE AMS P 46112 : 2002(S2015)
|
PLASTIC SHEET AND STRIP, POLYIMIDE |
|
ASTM D 7894/D7894M : 2014
|
Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems |
|
NBR 15122 : 2013
|
|
|
SAE AMS 3660 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, GENERAL PURPOSE GRADE, AS SINTERED |
|
SAE AMS 3661 : 2015
|
POLYTETRAFLUOROETHYLENE (PTFE) FILM, PREMIUM GRADE |
|
SAE AS 81765 : 2017
|
INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
|
CSA C22.2 No. 1 : 2004
|
AUDIO, VIDEO AND SIMILAR ELECTRONIC EQUIPMENT |
|
SAE AMS 3359 : 2016
|
SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY |
|
SAE AMS 3812 : 2016
|
RODS, GLASS FIBER, POLYESTER RESIN, LOADED PULTRUSION |
|
AWWA C105/A21.5 : 2010
|
POLYETHYLENE ENCASEMENT FOR DUCTILE-IRON PIPE SYSTEMS |
|
AWWA C210 : 2015
|
LIQUID-EPOXY COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS |
|
ANSI/AWWA C216 : 2015
|
HEAT-SHRINKABLE CROSS-LINKED POLYOLEFIN COATINGS FOR STEEL WATER PIPE AND FITTINGS |
|
SAE AMS 3668 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, PREMIUM GRADE, AS SINTERED |
|
IEEE 1310 : 2012
|
RECOMMENDED PRACTICE FOR THERMAL CYCLE TESTING OF FORM-WOUND STATOR BARS AND COILS FOR LARGE ROTATING MACHINES |
|
IEEE C57.12.56 : 1986
|
THERMAL EVALUATION OF INSULATION SYSTEMS FOR VENTILATED DRY-TYPE POWER AND DISTRIBUTION TRANSFORMERS |
|
ASTM D 3308 : 2012
|
SPECIFICATION FOR PTFE RESIN SKIVED TAPE |
|
IEEE 1523 : 2002
|
GUIDE FOR THE APPLICATION, MAINTENANCE, AND EVALUATION OF ROOM TEMPERATURE VULCANIZING (RTV) SILICONE RUBBER COATINGS FOR OUTDOOR CERAMIC INSULATION |
|
IEEE 404 : 2012
|
EXTRUDED AND LAMINATED DIELECTRIC SHIELDED CABLE JOINTS RATED 2.5 KV TO 500 KV |
|
ASTM D 4969 : 2017 : REDLINE
|
Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric |
|
ASTM D 1562 : 2015 : REDLINE
|
Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP) |
|
CSA C22.2 No. 0.17 : 2000 : R2013
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
IEEE C57.12.60 : 2009
|
TEST PROCEDURE FOR THERMAL EVALUATION OF INSULATION SYSTEMS FOR DRY-TYPE POWER AND DISTRIBUTION TRANSFORMERS, INCLUDING OPEN-WOUND, SOLID-CAST, AND RESIN-ENCAPSULATED TRANSFORMERS |
|
NBR 15723-7 : 2013
|
IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 7: SPECIFICATION FOR POLYETHERKETONEETHER-KETONEKETONE (PEKEKK) POLYMERS |
|
NBR 15723-13 : 2013
|
IMPLANTS FOR SURGERY - POLYMERIC MATERIALS - PART 13: SPECIFICATION FOR POLYETHERKETONEKETONE (PEKK) |
|
NBR 13953 : 1997 ERRATA 2002
|
FIO PARA ENROLAMENTO - ENSAIOS |
|
AWWA C225 : 2014
|
FUSED POLYOLEFIN COATINGS FOR STEEL WATER PIPE |
|
NBR 15804-3 : 2013
|
POLYMERIC MATERIALS FOR MEDICAL APPLICATIONS - PART 3: GUIDE FOR ASSESSMENT OF THERMOPLASTIC POLYURETHANE SOLIDS AND SOLUTIONS |
|
NACE SP 01 85 : 2007
|
EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE |
|
UNE EN ISO 21809-3 : 2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
|
SAE AMS 3647 : 2015
|
POLYFLUOROETHYLENE PROPYLENE FILM AND SHEET |
|
SAE AMS 3356 : 2014
|
SILICONE (VMQ) RUBBER, LUBRICATING OIL AND COMPRESSION SET RESISTANT, ELECTRICAL GRADE, 55 - 65 |
|
ASTM F 1837M : 1997 : R2002
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
CSA C22.2 No. 269.2 : 2017
|
SURGE PROTECTIVE DEVICES - TYPE 2 - PERMANENTLY CONNECTED |
|
CSA C22.2 No. 269.1 : 2017
|
SURGE PROTECTIVE DEVICES - TYPE 1 - PERMANENTLY CONNECTED |
|
SAE AS 81550A : 2014
|
INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
|
ASTM D 229 : 2013-11
|
TEST METHODS FOR RIGID SHEET AND PLATE MATERIALS USED FOR ELECTRICAL INSULATION |
|
ASTM A 674 : 2010 : R2014
|
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
|
ASTM D 1830 : 2017 : REDLINE
|
Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method |
|
ASTM D 3308 : 2012 : R2017
|
Standard Specification for PTFE Resin Skived Tape |
|
ASTM D 3032 : 2016 : REDLINE
|
Standard Test Methods for Hookup Wire Insulation |
|
ASME PCC 2 : 2015
|
REPAIR OF PRESSURE EQUIPMENT AND PIPING |
|
ASTM D 707 : 2015 : REDLINE
|
Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB) |
|
ASTM D 3222 : 2005 : R2010
|
Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
|
IEC PAS 61249-3-1 : 1.0
|
MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 3-1: COPPER-CLAD LAMINATES FOR FLEXIBLE BOARDS (ADHESIVE AND NON-ADHESIVE TYPES) |
|
ASTM A 674 : 2010
|
Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
|
ASTM F 1837M : 1997 : R2012 : EDT 1
|
Standard Specification for Heat-Shrink Cable Entry Seals (Metric) |
|
ASTM D 4733 : 2013-04
|
TEST METHODS FOR SOLVENTLESS ELECTRICAL INSULATING VARNISHES |
|
CSA C22.2 No. 269.5 : 2017
|
SURGE PROTECTIVE DEVICES - TYPE 5 - COMPONENTS |
|
ASTM D 352 : 1997 : R2003
|
Standard Test Methods for Pasted Mica Used in Electrical Insulation |
|
ASTM F 665 : 2009
|
Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application |
|
ASTM F 602 : 2009 : R2015
|
Standard Criteria for Implantable Thermoset Epoxy Plastics |
|
ASTM D 5204 : 2017 : REDLINE
|
CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS |
|
ASTM F 356 : 1975
|
SPECIFICATION FOR BERYLLIA CERAMICS FOR ELECTRONIC AND ELECTRICAL APPLICATIONS |
|
ASTM F 602 : 2009
|
Standard Criteria for Implantable Thermoset Epoxy Plastics |
|
SAE AMS 3670/1 : 2004
|
UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES |
|
NBR 15232 : 2013
|
COMPOSITE LINE POST INSULATOR FOR A.C. OVERHEAD LINES WITH NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
|
ASTM D 3756 : 1997 : R2004
|
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields |
|
ASTM D 1711 : 2015 : REDLINE
|
Standard Terminology Relating to Electrical Insulation |
|
ASTM D 2442 : 1975 : R2007
|
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
|
ASTM D 3394 : 2016 : REDLINE
|
Standard Test Methods for Sampling and Testing Electrical Insulating Board |
|
ASTM E 1420 : 1991
|
Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996) |
|
ASTM F 1742 : 2003 : R2011
|
Standard Specification for PVC Insulating Sheeting |
|
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
|
NEMA FI 3 : 2004
|
CALENDERED ARAMID PAPERS USED FOR ELECTRICAL INSULATION |
|
ASTM D 2413 : 2016 : REDLINE
|
Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric |
|
ASTM F 602 : 2009 : R2014
|
Standard Criteria for Implantable Thermoset Epoxy Plastics |
|
ASTM F 790 : 2008
|
GUIDE FOR TESTING MATERIALS FOR AEROSPACE PLASTIC TRANSPARENT ENCLOSURES |
|
ASTM D 2633 : 2013-03
|
TEST METHODS FOR THERMOPLASTIC INSULATIONS AND JACKETS FOR WIRE AND CABLE |
|
ASTM D 3426 : 1997 : R2012
|
Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves |
|
ASTM D 7193 : 2017 : REDLINE
|
Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 876 : 2013 : REDLINE
|
Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation |
|
SAE AMS 3666 : 2012
|
POLYTETRAFLUOROETHYLENE (PTFE) SHEET, GLASS CLOTH REINFORCED |
|
ASTM F 2468 : 2005
|
CLASSIFICATION FOR SPECIFYING SILICONE ADHESIVES AND SEALANTS FOR TRANSPORTATION APPLICATIONS |
|
IEEE DRAFT 434 : D10 2006
|
FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
|
ASTM D 3018/D3018M : 2011 : R2017
|
SPECIFICATION FOR CLASS A ASPHALT SHINGLES SURFACED WITH MINERAL GRANULES |
|
ASTM D 202 : 2017 : REDLINE
|
Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation |
|
NACE RP 01 1974 : 1974
|
CORROSION CONTROL OF ELECTRIC UNDERGROUND RESIDENTIAL DISTRIBUTION SYSTEMS |
|
ASTM F 1742:2003
|
SPECIFICATION FOR PVC INSULATING SHEETING |
|
ASTM D 4101 : 2018-02
|
CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPROPYLENE INJECTION AND EXTRUSION MATERIALS |
|
ASTM D 1458 : 2013-12
|
TEST METHODS FOR FULLY CURED SILICONE RUBBER-COATED GLASS FABRIC AND TAPES FOR ELECTRICAL INSULATION |
|
ASTM F 1742 : 2003 : EDT 1
|
Standard Specification for PVC Insulating Sheeting |
|
ASTM D 8065/D8065M : 2016
|
Standard Classification System and Basis for Specification for Specifying Plastic Films |
|
ASTM D 705 : 1999 : R2012
|
Standard Specification for Urea-Formaldehyde Molding Compounds |
|
ASTM D 788 : 2016 : REDLINE
|
Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds |
|
ASTM D 6343 : 2014-11
|
TEST METHODS FOR THIN THERMALLY CONDUCTIVE SOLID MATERIALS FOR ELECTRICAL INSULATION AND DIELECTRIC APPLICATIONS |
|
ASTM D 619 : 2014
|
Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
|
ASTM F 1742 : 2003
|
Standard Specification for PVC Insulating Sheeting |
|
ASTM F 641 : 2009 : R2014
|
Standard Specification for Implantable Epoxy Electronic Encapsulants |
|
CSA C22.2 No. 9.0 : 1996
|
GENERAL REQUIREMENTS FOR LUMINAIRES |
|
ASTM D 3756 : 1997
|
TEST METHOD FOR EVALUATION OF RESISTANCE TO ELECTRICAL BREAKDOWN BY TREEING IN SOLID DIELECTRIC MATERIALS USING DIVERGING FIELDS |
|
ASTM D 3369 : 2001
|
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006) |
|
ASTM D 2442 : 1975 : R2016
|
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
|
ASTM D 5948 : 2005 : EDT 1
|
Standard Specification for Molding Compounds, Thermosetting |
|
ASTM F 1579 : 2002 : EDT 1
|
Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011) |
|
ASTM D 4325 : 2013 : REDLINE
|
Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes |
|
ASTM D 176 : 2007
|
TEST METHODS FOR SOLID FILLING AND TREATING COMPOUNDS USED FOR ELECTRICAL INSULATION |
|
ASTM F 968 : 1993 : R2002
|
Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
CSA C22.2 No. 144 : 1991 : R2006
|
GROUND FAULT CIRCUIT INTERRUPTERS |
|
CSA C22.2 No. 9.0 : 1996 : INC : SUP P1 : 1997 : R2016
|
GENERAL REQUIREMENTS FOR LUMINAIRES |
|
ASTM D 6411/D6411M : 1999 : R2012
|
Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
|
(INACTIVE RECORD)ASTM A 674 : 2010
|
PRACTICE FOR POLYETHYLENE ENCASEMENT FOR DUCTILE IRON PIPE FOR WATER OR OTHER LIQUIDS |
|
ASTM D 3353 : 2018 : REDLINE
|
Standard Test Methods for Fibrous-Insulated Magnet Wire |
|
CSA C22.2 No. 0.17 : 2000
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
ASTM D 2442 : 1975 : R2001
|
Standard Specification for Alumina Ceramics for Electrical and Electronic Applications |
|
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
|
(INACTIVE RECORD)ASTM D 704 : 1999
|
SPECIFICATION FOR MELAMINE-FORMALDEHYDE MOLDING COMPOUNDS |
|
ASTM D 3296 : 2014-04
|
SPECIFICATION FOR FEP-FLUOROCARBON TUBE |
|
ASTM D 3013 : 2013 : REDLINE
|
Standard Specification for Epoxy Molding Compounds |
|
ASTM F 641 : 2009
|
SPECIFICATION FOR IMPLANTABLE EPOXY ELECTRONIC ENCAPSULANTS |
|
ASTM D 5642 : 2016 : REDLINE
|
Standard Test Method for Sealed Tube Chemical Compatibility Test |
|
ASTM F 641 : 2009
|
Standard Specification for Implantable Epoxy Electronic Encapsulants |
|
ASTM F 1579 : 2002
|
SPECIFICATION FOR POLYARYLETHERKETONE (PAEK) POLYMERS FOR SURGICAL IMPLANT APPLICATIONS |
|
ASTM D 176 : 2007 : R2012
|
Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation (Withdrawn 2013) |
|
ASTM D 176 : 2007
|
Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation |
|
CSA C22.2 No. 144 : 1991: R2015
|
GROUND FAULT CIRCUIT INTERRUPTERS |
|
ASTM D 705 : 1999 : R2004
|
Standard Specification for Urea-Formaldehyde Molding Compounds |
|
ASTM D 3368 : 2017 : REDLINE
|
Standard Specification for FEP Sheet and Film |
|
ASTM D 3748 : 2014-03
|
PRACTICE FOR EVALUATING HIGH-DENSITY RIGID CELLULAR PLASTICS |
|
ASTM D 3308 : 2012
|
Standard Specification for PTFE Resin Skived Tape |
|
CSA C22.2 No. 269.4 : 2017
|
SURGE PROTECTIVE DEVICES - TYPE 4 - COMPONENT ASSEMBLIES |
|
ASTM F 712 : 2006
|
TEST METHODS AND SPECIFICATIONS FOR ELECTRICALLY INSULATING PLASTIC GUARD EQUIPMENT FOR PROTECTION OF WORKERS |
|
ASTM G 21 : 2015 : REDLINE
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
|
ASTM F 665 : 2009 : R2015
|
Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application |
|
ASTM D 6585 : 2017 : REDLINE
|
Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape |
|
ASTM D 352 : 1997 : R2008 : EDT 1
|
Standard Test Methods for Pasted Mica Used in Electrical Insulation |
|
ASTM D 3214 : 1996
|
Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002) |
|
ASTM D 3756 : 1997 : R2010
|
Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields |
|
ASTM D 1051 : 2014-04
|
SPECIFICATION FOR RUBBER INSULATING SLEEVES |
|
ASTM D 2148 : 2013-11
|
TEST METHODS FOR BONDABLE SILICONE RUBBER TAPES USED FOR ELECTRICAL INSULATION |
|
ASTM D 729 : 1995
|
Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000) |
|
ASTM D 470 : 2013 : REDLINE
|
Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable |
|
ASTM D 2305 : 2010-10
|
TEST METHODS FOR POLYMERIC FILMS USED FOR ELECTRICAL INSULATION |
|
ASTM F 1109 : 1987
|
Specification for Porous Composites of Polytetrafluoroethylene and Carbon for Surgical Implant Applications (Withdrawn 1993) |
|
IEEE 930 : 2004
|
GUIDE FOR THE STATISTICAL ANALYSIS OF ELECTRICAL INSULATION BREAKDOWN DATA |
|
MIL C 47009 : B
|
COMPOUND, SILICONE, HEAT SINK |
|
MIL A 46146 : B
|
ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
|
ANSI/AWWA C213 : 2015
|
FUSION-BONDED EPOXY COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS |
|
ASTM D 5047 : 2017 : REDLINE
|
Standard Specification for Polyethylene Terephthalate Film and Sheeting |
|
ASTM D 348 : 2013 : REDLINE
|
Standard Test Methods for Rigid Tubes Used for Electrical Insulation |
|
ASTM F 711 : 2017 : REDLINE
|
Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools |
|
ASTM F 942 : 2002 : R2008
|
Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures |
|
CSA C22.2 No. 9.0 : 1996 : R2011
|
GENERAL REQUIREMENTS FOR LUMINAIRES |
|
ASTM D 704 : 1999 : R2012
|
Standard Specification for Melamine-Formaldehyde Molding Compounds |
|
ASTM F 790 : 2008 : R2013
|
Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures |
|
ASTM F 712 : 2006
|
Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
SAE AMS 3659 : 2011
|
POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS PREMIUM STRENGTH, SINTERED AND STRESS-RELIEVED |
|
SAE AMS 3612 : 2016
|
POLYESTER FILM, ELECTRICAL GRADE, GENERAL PURPOSE |
|
ASTM D 69 : 2012 : REDLINE
|
Standard Test Methods for Friction Tapes |
|
ASTM D 350 : 2013 : REDLINE
|
Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation |
|
ASTM D 6411/D6411M : 1999
|
SPECIFICATION FOR SILICONE RUBBER ROOM TEMPERATURE VULCANIZING LOW OUTGASSING MATERIALS |
|
ASTM D 1675 : 2003 : R2011
|
Standard Test Methods for Polytetrafluoroethylene Tubing |
|
ASTM D 295 : 2012
|
Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation (Withdrawn 2020) |
|
ASTM D 4066 : 2013
|
Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
|
ASTM D 704 : 1999 : R2004
|
Standard Specification for Melamine-Formaldehyde Molding Compounds |
|
ASTM D 1048 : 2014-12
|
SPECIFICATION FOR RUBBER INSULATING BLANKETS |
|
ASTM D 902 : 2012 : REDLINE
|
Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation |
|
ASTM F 942 : 2002
|
GUIDE FOR SELECTION OF TEST METHODS FOR INTERLAYER MATERIALS FOR AEROSPACE TRANSPARENT ENCLOSURES |
|
ASTM D 6411/D6411M : 1999 : R2005
|
Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials |
|
ASTM D 116 : 1986 : R2016
|
Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications |
|
ASTM D 748 : 2018 : REDLINE
|
Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors |
|
ASTM D 3426 : 1997
|
TEST METHOD FOR DIELECTRIC BREAKDOWN VOLTAGE AND DIELECTRIC STRENGTH OF SOLID ELECTRICAL INSULATING MATERIALS USING IMPULSE WAVES |
|
ASTM F 2468 : 2005 : R2011
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
ASTM D 1039 : 2016 : REDLINE
|
Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation |
|
ASTM F 1876 : 1998
|
SPECIFICATION FOR POLYETHERKETONEETHERKETONEKETONE (PEKEKK) RESINS FOR SURGICAL IMPLANT APPLICATIONS |
|
ASTM D 705 : 1999
|
Standard Specification for Urea-Formaldehyde Molding Compounds |
|
ASTM D 1675 : 2003
|
Standard Test Methods for Polytetrafluoroethylene Tubing |
|
ASTM D 352 : 1997 : R2016
|
Standard Test Methods for Pasted Mica Used in Electrical Insulation |
|
ASTM D 1000 : 2017 : REDLINE
|
Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications |
|
ASTM D 2346 : 2000 : R2008
|
Steel wire and products thereof. Non-ferrous metallic coatings on steel wire. General Principles |
|
GOST 849:2018
|
Primary nickel. SpecificationsE |
|
ISO 21809-3 : 2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
|
AAMI IEC TIR 62354 : 2015
|
GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
|
ASTM D 345 : 2002
|
Side bearings of the freight wagon bogies. General specifications |
|
BS EN ISO 12086-2 : 2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
|
DD IEC PAS 61249-3-1 : 2007
|
MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 3-1: COPPER-CLAD LAMINATES FOR FLEXIBLE BOARDS (ADHESIVE AND NON-ADHESIVE TYPES) |
|
03/106712 DC : 0
|
IEC 62326-3 ED.1.0 - PRINTED BOARDS - PART 3: SAFETY CERTIFICATION OF RIGID PRINTED CIRCUIT BOARDS FOR ELECTRONIC ASSEMBLIES |
|
BS PD IEC TR 62354 : 2014
|
GENERAL TESTING PROCEDURES FOR MEDICAL ELECTRICAL EQUIPMENT |
|
EN ISO 21809-3 : 2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
|
MIL I 15265 : C
|
INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) |
|
ISO 12086-2 : 2006
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
|
ANSI C37.55 : 1989
|
MEDIUM VOLTAGE METAL-CLAD ASSEMBLIES - CONFORMANCE TEST PROCEDURES |
|
CSA C22.2 No. 144.1 : 2016
|
GROUND-FAULT CIRCUIT-INTERRUPTERS |
|
CSA C22.2 No. 126.2 : 2002
|
NONMETALLIC CABLE TRAY SYSTEMS |
|
NASA KSC SPEC E 0029 : 1972
|
COMPOUND, POTTING AND MOLDING ELASTOMERIC, SPECIFICATION FOR |
|
NBR 16161 : 2015
|
STORAGE OF FLAMMABLE AND COMBUSTIBLE LIQUIDS - STEEL UNDERGROUND STORAGE TANK - MANUFACTURING AND PARTITIONING SPECIFICATION |
|
CSA S806: 2012
|
DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
|
ASTM D 700 : 1981
|
SPECIFICATION FOR PHENOLIC MOLDING COMPOUNDS |
|
CSA C22.2 No. 126.2 : 2002
|
NONMETALLIC CABLE TRAY SYSTEMS |
|
CSA S806 :2012
|
DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
|
UL 943 : 5
|
GROUND-FAULT CIRCUIT-INTERRUPTERS |
|
CSA C22.2 No. 126.2 : 2002 :R2017
|
NONMETALLIC CABLE TRAY SYSTEMS |
|
CSA S806 : 2012 : R2017
|
DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
|
CSA C22.2 No. 126.2 : 2002 : INC : UPD 1 :2005 : R2012
|
NONMETALLIC CABLE TRAY SYSTEMS |
|
CSA C22.2 No. 126.2 : 2002 : INC : UPD 1 : 2005 : R2012
|
NONMETALLIC CABLE TRAY SYSTEMS |
|
CSA C22.2 No. 126.2 : 2002 : R2017
|
NONMETALLIC CABLE TRAY SYSTEMS |
|
CSA S806:2012
|
DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
|
CSA S806 : 2012 :R2017
|
DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS |
|
NBR 15956 : 2011
|
POLYMERIC CROSSARMS - DEFINITIONS, TEST METHODS, STANDARDIZATION AND APPROVAL CRITERION |
|
DIN EN ISO 12086-2:2006-05
|
PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |