|
ASTM F 2025 : 2006 : R2018
|
Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
|
|
ASTM D 4762 : 2018
|
Standard Guide for Testing Polymer Matrix Composite Materials
|
|
ASTM D 1185 : 1998 : REV A : R2017
|
Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
|
|
ASTM D 2238 : 1992 : R2012 : EDT 1
|
Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm<sup>−1</sup> (Withdrawn 2021)
|
|
ASTM D 3124 : 1998 : R2011
|
Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
|
|
ASTM D 3981 : 2009 : REV A : R2016
|
Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
|
|
ASTM D 4649 : 2003 : R2016
|
Standard Guide for Selection and Use of Stretch Wrap Films
|
|
ASTM D 4801 : 2008 : R2016
|
Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
|
|
ASTM D 5576 : 2000 : R2013
|
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
|
|
ASTM D 6248 : 1998 : R2012 : EDT 1
|
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021)
|
|
ASTM E 252 : 2006 : R2013
|
Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
|
|
ASTM F 1986 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems (Withdrawn 2020)
|
|
ASTM F 1987 : 2001 : R2011
|
Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems (Withdrawn 2020)
|
|
ASTM F 2718 : 2009 : R2015
|
Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022)
|
|
ASTM F 2818 : 2010 : R2014 : EDT 1
|
Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
|
|
ASTM F 2854 : 2010 : R2016
|
Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
|
|
ASTM F 639 : 2009 : R2015
|
Standard Specification for Polyethylene Plastics for Medical Applications
|
|
ASTM F 755 : 1999 : R2011
|
Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants
|
|
ASTM D 4976 : 2012 : REV A
|
Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
|
|
ASTM F 1545 : 2015 : REV A
|
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
|
|
ASTM F 2389 : 2017 : REV A
|
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
|
|
ASTM D 6645 : 2018
|
Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
|
|
ASTM D 4883 : 2018
|
Standard Test Method for Density of Polyethylene by the Ultrasound Technique
|
|
ASTM F 3123 : 2018 : REV A
|
Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
|
|
ASTM F 1960 : 2018 : REV A
|
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
|
|
ASTM F 412 : 2019
|
Standard Terminology Relating to Plastic Piping Systems
|
|
ASTM F 3219 : 2019
|
Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
|
|
ASTM F 2313 : 2018
|
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide
|
|
ASTM F 2881/F2881M : 2019
|
Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
|
|
ASTM F 2579 : 2018
|
Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
|
|
ASTM F 561 : 2019
|
Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
|
|
ASTM F 2788/F2788M : 2019
|
Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
|
|
ASTM D 5577 : 2019
|
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
|
|
ASTM F 2764/F2764M : 2019
|
Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
|
|
ASTM F 876 : 2019 : REV A
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
|
|
ASTM D 787 : 2018
|
Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
|
|
ASTM D 5721 : 2008 : R2018
|
Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
|
|
ASTM D 6434 : 2012 : R2018
|
Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
|
|
ASTM D 1675 : 2018
|
Standard Test Methods for Polytetrafluoroethylene Tubing
|
|
ASTM D 4101 : 2017 : EDT 1
|
Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
|
|
ASTM D 1248 : 2016
|
Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
|
|
ASTM D 1593 : 2013
|
Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
|
|
ASTM D 1895 : 2017
|
Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
|
|
ASTM D 2103 : 2015
|
Standard Specification for Polyethylene Film and Sheeting
|
|
ASTM D 2734 : 2016
|
Standard Test Methods for Void Content of Reinforced Plastics
|
|
ASTM D 2839 : 2016
|
Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
|
|
ASTM D 3171 : 2015
|
Standard Test Methods for Constituent Content of Composite Materials
|
|
ASTM D 3350 : 2014
|
Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
|
|
ASTM D 3485 : 2015
|
Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
|
|
ASTM F 1925 : 2017
|
Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
|
|
ASTM D 3664 : 2016
|
Standard Specification for Biaxially Oriented Polymeric Resin Film for Capacitors in Electrical Equipment (Withdrawn 2022)
|
|
ASTM F 2026 : 2017
|
Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
|
|
ASTM D 3800 : 2016
|
Standard Test Method for Density of High-Modulus Fibers
|
|
ASTM F 2160 : 2016
|
Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
|
|
ASTM D 4000 : 2016
|
Standard Classification System for Specifying Plastic Materials
|
|
ASTM D 4321 : 2015
|
Standard Test Method for Package Yield of Plastic Film (Withdrawn 2024)
|
|
ASTM D 4397 : 2016
|
Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
|
|
ASTM D 4635 : 2016
|
Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
|
|
ASTM D 5047 : 2017
|
Standard Specification for Polyethylene Terephthalate Film and Sheeting
|
|
ASTM D 7082 : 2015
|
Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
|
|
ASTM F 648 : 2014
|
Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
|
|
ASTM F 2805 : 2016
|
Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
|
|
ASTM F 2848 : 2017
|
Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
|
|
ASTM D 7774 : 2017
|
Standard Test Method for Flexural Fatigue Properties of Plastics
|
|
ASTM D 7791 : 2017
|
Standard Test Method for Uniaxial Fatigue Properties of Plastics
|
|
ASTM F 2820 : 2012
|
Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
|
|
ASTM D 5747/D5747M : 2008 : R2013 : EDT 1
|
Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
|
|
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1
|
Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
|
|
ASTM F 2929 : 2017
|
Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
|
|
ASTM F 2905/F2905M : 2013
|
Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
|
|
ASTM D 5514/D5514M : 2018
|
Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
|
|
ASTM F 2968/F2968M : 2014 : REV A
|
Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
|
|
ASTM D 6495/D6495M : 2018
|
Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
|
|
ASTM D 2684/D2684M : 2015
|
Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products (Withdrawn 2024)
|
|
ASTM D 5889/D5889M : 2018
|
Standard Practice for Quality Control of Geosynthetic Clay Liners
|
|
ASTM D 8136 : 2017
|
Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.