• There are no items in your cart

ASTM D 1776 : 2008 : EDT 1

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Conditioning and Testing Textiles
Available format(s)

Hardcopy , PDF

Superseded date

11-11-2014

Language(s)

English

Published date

08-01-2008

1.1 This practice covers the conditioning and testing of textiles when conditioning is specified in a test method. Because prior exposure of textiles to high or low humidity may affect moisture pick-up equilibrium, a procedure also is given for preconditioning the material when required.

1.2 The values stated the text are in SI units. Inch-pound units are shown in parentheses. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance to a specification.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 13
DocumentType
Standard Practice
Pages
4
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3882 : 2008 : R2016 : EDT 1 Standard Test Method for Bow and Skew in Woven and Knitted Fabrics
ASTM D 6588/D6588M : 2011 : R2016 Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
ASTM D 6283 : 2012 Standard Test Method for Tuft Element Length of Uncoated Pile Yarn Floor Coverings
ASTM D 5427 : 2009 : R2019 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM D 1440 : 2007 : R2019 Standard Test Method for Length and Length Distribution of Cotton Fibers (Array Method)
ASTM D 7744/D7744M : 2011 Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
ASTM D 5793 : 2018 Standard Test Method for Binding Sites per Unit Length or Width of Pile Yarn Floor Coverings
ASTM D 6479 : 2015 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM D 1575 : 2013 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver (Withdrawn 2022)
ASTM D 2731 : 2015 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D 5035 : 2011 : R2019 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
ASTM D 4884/D4884M : 2014 : REV A Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles
ASTM D 5262 : 2007 : R2016 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
ASTM D 519 : 2004 : R2013 Standard Test Method for Length of Fiber in Wool Top (Withdrawn 2022)
ASTM F 2704 : 2017 : REV A Standard Specification for Air-Fed Protective Ensembles
ASTM D 581/D581M : 2012 Standard Specification for Glass Fiber Greige Braided Tubular Sleeving (Withdrawn 2021)
ASTM D 7785 : 2012 Standard Test Method for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
ASTM D 7267 : 2019 : REV A Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
ASTM D 5344 : 1999 : R2017 Standard Test Method for Extension Force of Partially Oriented Yarn
ASTM D 4772 : 2014 : R2019 Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow)
ASTM D 1388 : 2018 Standard Test Method for Stiffness of Fabrics
ASTM D 7570 : 2017 Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM D 4724 : 2011 Standard Test Method for Entanglements in Untwisted Filament Yarns by Needle Insertion
ASTM D 6828 : 2002 : R2019 Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
ASTM D 5252 : 2015 Standard Practice for the Operation of the Hexapod Tumble Drum Tester
ASTM D 1448 : 2011 Standard Test Method for Micronaire Reading of Cotton Fibers (Withdrawn 2020)
ASTM D 4120 : 2007 : R2018 Standard Test Method for Fiber Cohesion in Roving, Sliver, and Top in Dynamic Tests
ASTM F 1648 : 1995 : R2013 Standard Test Methods for Archery Bowstring Component—Serving String Material (Withdrawn 2022)
ASTM D 4595 : 2017 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
ASTM D 1423/D1423M : 2016 Standard Test Method for Twist in Yarns by Direct-Counting
ASTM F 2407 : 2006 : R2013 : EDT 1 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
ASTM D 1336 : 2007 : R2019 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D 6611 : 2016 Standard Test Method for Wet and Dry Yarn-on-Yarn Abrasion Resistance
ASTM D 6962 : 2017 Standard Practice for Operation of a Roller Chair Tester for Pile Yarn Floor Coverings
ASTM D 5823 : 2019 Standard Test Method for Tuft Height of Pile Floor Coverings
ASTM D 4685/D4685M : 2015 Standard Test Method for Pile Fabric Abrasion
ASTM D 204 : 2002 : R2016 Standard Test Methods for Sewing Threads
ASTM D 2859 : 2016 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
ASTM D 6566 : 2018 Standard Test Method for Measuring Mass Per Unit Area of Turf Reinforcement Mats
ASTM F 1959/F1959M : 2014 : EDT 1 Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM D 5548 : 2013 Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
ASTM F 1752 : 1996 : R2014 Standard Test Method for Archery Bow Component—Cord Material (Withdrawn 2023)
ASTM D 1447 : 2007 : R2012 : EDT 1 Standard Test Method for Length and Length Uniformity of Cotton Fibers by Photoelectric Measurement
ASTM D 7508/D7508M : 2010 : R2015 Standard Specification for Polyolefin Chopped Strands for Use in Concrete
ASTM D 7410 : 2007 : R2012 Standard Practice for Qualification of Cotton Classification Instruments for Cotton Marketing (Withdrawn 2021)
ASTM D 6540 : 2017 Standard Test Method for Accelerated Soiling of Pile Yarn Floor Covering
ASTM D 3656/D3656M : 2013 Standard Specification for Insect Screening and Louver Cloth Woven from<brk/>Vinyl-Coated Glass Yarns
ASTM D 3886 : 1999 : R2015 Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
ASTM D 5867 : 2012 : EDT 1 Standard Test Methods for Measurement of Physical Properties of Raw Cotton by Cotton Classification Instruments
ASTM D 4966 : 2012 : R2016 Standard Test Method for Abrasion Resistance of Textile Fabrics (Martindale Abrasion Tester Method)
ASTM D 5034 : 2009 : R2017 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
ASTM D 3773/D3773M : 2010 : R2019 Standard Test Methods for Length of Woven Fabric
ASTM D 7983 : 2017 Standard Test Method for Shrinkage of Carpet Backing Fabrics
ASTM D 3776/D3776M : 2009 : REV A : R2017 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
ASTM F 778 : 1988 : R2014 Standard Methods for Gas Flow Resistance Testing of Filtration Media
ASTM D 4974 : 2004 : R2016 Standard Test Method for Hot Air Thermal Shrinkage of Yarn and Cord Using a Thermal Shrinkage Oven
ASTM D 7748/D7748M : 2014 : EDT 1 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
ASTM D 5278/D5278M : 2009 : R2017 Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
ASTM D 1335 : 2017 : EDT 1 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
ASTM D 2462 : 2013 Standard Test Method for Moisture in Wool by Distillation With Toluene (Withdrawn 2022)
ASTM F 2703 : 2008 : R2013 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction
ASTM D 4920 : 2013 Standard Terminology Relating to Conditioning, Chemical, and Thermal Properties (Withdrawn 2022)
ASTM D 2261 : 2013 : R2017 : EDT 1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D 3822/D3822M : 2014 Standard Test Method for Tensile Properties of Single Textile Fibers
ASTM D 5362 : 2013 : R2018 Standard Test Method for Snagging Resistance of Fabrics (Bean Bag)
ASTM D 6859 : 2018 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
ASTM D 6719 : 2012 Standard Guide for Standard Test Methods and Practices for Evaluating Pile Yarn Floor Covering (Withdrawn 2021)
ASTM D 2130 : 2013 Standard Test Method for Diameter of Wool and Other Animal Fibers by Microprojection (Withdrawn 2022)
ASTM D 4533/D4533M : 2015 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
ASTM D 737 : 2018 Standard Test Method for Air Permeability of Textile Fabrics
ASTM D 7571 : 2018 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
ASTM D 5417 : 2016 Standard Practice for Operation of the Vettermann Drum Tester
ASTM D 6717 : 2007 : R2018 Standard Test Method for Linear Density of Elastomeric Yarns (Skein Specimens)
ASTM D 6614 : 2007 : R2015 Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
ASTM D 2259 : 2002 : R2016 Standard Test Method for Shrinkage of Yarns
ASTM D 6587 : 2012 : R2018 Standard Test Method for Yarn Number Using Automatic Tester
ASTM F 1955 : 2015 Standard Test Method for Flammability of Sleeping Bags
ASTM D 4389/D4389M : 2016 Standard Specification for Finished Glass Fabrics Woven From Rovings
ASTM D 6321/D6321M : 2014 Standard Practice for the Evaluation of Machine Washable T-Shirts
ASTM D 1424 : 2009 : R2019 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM D 3786/D3786M : 2018 Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM D 276 : 2012 Standard Test Methods for Identification of Fibers in Textiles (Withdrawn 2021)
ASTM D 3108/D3108M : 2013 Standard Test Method for Coefficient of Friction, Yarn to Solid Material
ASTM D 4030/D4030M : 2015 Standard Specification for Glass Fiber Cord and Sewing Thread
ASTM D 1442 : 2006 : R2019 Standard Test Method for Maturity of Cotton Fibers (Sodium Hydroxide Swelling and Polarized Light Procedures)
ASTM D 6337 : 1998 : R2013 Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
ASTM D 6500 : 2000 : R2012 : EDT 1 Standard Test Method for Diameter of Wool and Other Animal Fibers Using an Optical Fiber Diameter Analyser (Withdrawn 2021)
ASTM F 2702 : 2015 Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction (Withdrawn 2020)
ASTM D 3217/D3217M : 2015 Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations
ASTM F 2700 : 2008 : R2013 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating
ASTM D 8007 : 2015 : R2019 Standard Test Method for Wale and Course Count of Weft Knitted Fabrics
ASTM D 3107 : 2007 : R2019 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D 1576 : 2013 Standard Test Method for Moisture in Wool by Oven-Drying (Withdrawn 2022)
ASTM D 2646 : 2018 Standard Guide for Backing Fabric Characteristics of Pile Yarn Floor Coverings
ASTM D 2524 : 2013 Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method—<fraction> <num>1</num><den>8</den></fraction>-in. (3.2-mm) Gage Length (Withdrawn 2022)
ASTM D 7025 : 2009 : R2015 : EDT 1 Standard Test Method for Assessing Clean Flax Fiber Fineness
ASTM D 6119 : 2012 Standard Practice for Creating Surface Appearance Changes in Pile Yarn Floor Covering from Foot Traffic
ASTM D 7506/D7506M : 2017 Standard Test Method for Pocket Reinforcement
ASTM D 4964 : 1996 : R2016 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D 1445/D1445M : 2012 Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)
ASTM D 5587 : 2015 : R2019 Standard Test Method for Tearing Strength of Fabrics by Trapezoid Procedure
ASTM D 6961/D6961M : 2009 : R2015 : EDT 1 Standard Test Method for Color Measurement of Flax Fiber
ASTM D 3218 : 2007 : R2018 Standard Specification for Polyolefin Monofilaments
ASTM D 7142 : 2005 : R2016 Standard Test Method for Holding Strength of Prong-Ring Attached Snap Fasteners
ASTM G 147 : 2017 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM D 3412/D3412M : 2013 Standard Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D 4846 : 1996 : R2016 Standard Test Method for Resistance to Unsnapping of Snap Fasteners
ASTM D 3990 : 2012 : R2016 Standard Terminology Relating to Fabric Defects
ASTM D 7269/D7269M : 2017 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D 3939/D3939M : 2013 : R2017 Standard Test Method for Snagging Resistance of Fabrics (Mace)
ASTM D 7811 : 2013 : R2017 Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM D 7812 : 2016 Standard Test Method for Tensile Testing of Aramid Paper
ASTM D 2594 : 2004 : R2016 Standard Test Method for Stretch Properties of Knitted Fabrics Having Low Power
ASTM D 7241 : 2013 Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering (Withdrawn 2022)
ASTM D 4029/D4029M : 2016 Standard Specification for Finished Woven Glass Fabrics
ASTM D 1770 : 1994 : R2012 : EDT 1 Standard Test Method for Neps, Vegetable Matter, and Colored Fiber in Wool Top (Withdrawn 2021)
ASTM D 1441 : 2012 Standard Practice for Sampling Cotton Fibers for Testing
ASTM D 2724 : 2019 Standard Test Method for Bond Strength of Bonded, Fused, and Laminated Apparel Fabrics
ASTM F 1939 : 2015 Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
ASTM D 2061 : 2007 : R2013 Standard Test Methods for Strength Tests for Zippers
ASTM D 5726 : 1998 : R2013 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
ASTM D 6775 : 2013 : R2017 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
ASTM D 885/D885M : 2010 : REV A : R2014 : EDT 1 Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023)
ASTM F 1551 : 2009 : R2017 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
ASTM D 3787 : 2016 Standard Test Method for Bursting Strength of Textiles—Constant-Rate-of-Traverse (CRT) Ball Burst Test
ASTM D 2256/D2256M : 2010 : R2015 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D 6663 : 2008 : R2019 Standard Specification for Woven and Knitted Comforter and Accessory Products for Institutional and Household Use
ASTM D 1059 : 2017 Standard Test Method for Yarn Number Based on Short-Length Specimens
ASTM D 1578 : 1993 : R2016 Standard Test Method for Breaking Strength of Yarn in Skein Form
ASTM D 5431 : 2008 : R2019 Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
ASTM D 1987 : 2018 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
ASTM D 6770 : 2007 : R2015 Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
ASTM D 6720 : 2007 : R2018 Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
ASTM D 6413/D6413M : 2015 Standard Test Method for Flame Resistance of Textiles (Vertical Test)
ASTM D 3884 : 2009 : R2017 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
ASTM D 4158 : 2008 : R2016 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D 1294 : 2005 : R2013 Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length (Withdrawn 2022)
ASTM D 7138 : 2016 Standard Test Method to Determine Melting Temperature of Synthetic Fibers
ASTM D 6797 : 2015 Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test (Withdrawn 2024)
ASTM F 2992/F2992M : 2015 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer (TDM-100) Test Equipment
ASTM D 2054 : 1999 : R2015 Standard Test Method for Colorfastness of Zipper Tapes to Crocking
ASTM D 4886 : 2018 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
ASTM D 7842/D7842M : 2012 : R2016 Standard Test Method for Holding Strength of Tack and Prong Fastener Attached Buttons
ASTM D 6612 : 2000 : R2016 Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
ASTM F 2961 : 2015 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM D 580/D580M : 2015 Standard Specification for Greige Woven Glass Tapes and Webbings
ASTM D 4231 : 2014 Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts
ASTM D 7984 : 2016 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
ASTM D 2060 : 2014 : EDT 1 Standard Test Methods for Measuring Zipper Dimensions
ASTM D 646 : 2013 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022)
ASTM D 6241 : 2014 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D 579/D579M : 2015 Standard Specification for Greige Woven Glass Fabrics
ASTM D 1425/D1425M : 2014 Standard Test Method for Evenness of Textile Strands Using Capacitance Testing Equipment
ASTM D 3936 : 2017 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.