• There are no items in your cart

ASTM D 1886 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods for Nickel in Water
Available format(s)

Hardcopy , PDF

Superseded date

01-06-2022

Language(s)

English

Published date

11-27-2014

1.1These test methods 2,3,4 cover the atomic absorption determination of nickel in water and wastewaters. Three test methods are given as follows:

Concentration
Range


Sections

Test Method A—Atomic Absorption,  Direct


 0.1 to 10 mg/L


7 – 16

Test Method B—Atomic Absorption,  Chelation-Extraction


 10 to 1000 μg/L


17 – 26

Test Method C—Atomic Absorption,  Graphite Furnace


 5 to 100 μg/L


27 – 36

1.2Test Methods A, B, and C have been used successfully with reagent grade water and natural waters. Evaluation of Test Method C was also made in condensate from a medium Btu coal gasification process. It is the user's responsibility to ensure the validity of these test methods for other matrices.

1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound units that are provided for information only and are not considered standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Note 5, 11.8.1, 21.11, 23.7, and 23.10.

1.5Two former colorimetric test methods were discontinued. Refer to Appendix X1 for historical information.

Committee
D 19
DocumentType
Test Method
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3557 : 2017 Standard Test Methods for Cadmium in Water
ASTM D 3558 : 2015 Standard Test Methods for Cobalt in Water
ASTM D 1971 : 2016 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry
ASTM D 858 : 2017 Standard Test Methods for Manganese in Water
ASTM D 3559 : 2015 Standard Test Methods for Lead in Water (Withdrawn 2024)
ASTM D 1691 : 2017 Standard Test Methods for Zinc in Water
ASTM D 857 : 2017 Standard Test Method for Aluminum in Water
ASTM D 1068 : 2015 Standard Test Methods for Iron in Water
ASTM D 1688 : 2017 Standard Test Methods for Copper in Water
ASTM D 1687 : 2017 Standard Test Methods for Chromium in Water
ASTM D 3645 : 2015 Standard Test Methods for Beryllium in Water
ASTM F 897 : 2002 : R2013 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
ASTM F 897 : 2019 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
ASTM D 4309 : 2018 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water
ASTM D 4382 : 2018 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace

ASTM D 1687 : 2002 Standard Test Methods for Chromium in Water
ASTM D 4841 : 1988 : R2008 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 1691 : 2017 Standard Test Methods for Zinc in Water
ASTM D 5673 : 2005 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
ASTM D 3919 : 2015 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 1691 : 1990 Standard Test Methods for Zinc in Water
ASTM D 5810 : 1996 : R2021 Standard Guide for Spiking into Aqueous Samples
ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2003 Standard Terminology Relating to Water
ASTM D 1691 : 1995 Standard Test Methods for Zinc in Water
ASTM D 1688 : 2002 Standard Test Methods for Copper in Water
ASTM D 1688 : 2012 Standard Test Methods for Copper in Water
ASTM D 1068 : 2005 : EDT 1 Standard Test Methods for Iron in Water
ASTM D 4841 : 1988 : R2018 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 1129 : 2013 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM D 5847 : 1999 : REV A : EDT 1 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1687 : 1992 : R1996 Standard Test Methods for Chromium in Water
ASTM D 5810 : 1996 : R2011 Standard Guide for Spiking into Aqueous Samples
ASTM D 2777 : 2012 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 3557 : 2002 : R2007 : EDT 1 Standard Test Methods for Cadmium in Water
ASTM D 3919 : 2004 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 4841 : 1988 : R1998 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 5847 : 2002 : R2007 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 858 : 1995 Standard Test Methods for Manganese in Water
ASTM D 5810 : 1996 : R2001 Standard Guide for Spiking into Aqueous Samples
ASTM D 3559 : 1996 Standard Test Methods for Lead in Water
ASTM D 3559 : 2008 Standard Test Methods for Lead in Water
ASTM D 5673 : 2015 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 1129 : 2006 Standard Terminology Relating to Water
ASTM D 2777 : 2003 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D 4841 : 1988 : R2003 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 1066 : 2018 Standard Practice for Sampling Steam
ASTM D 3370 : 2010 Standard Practices for Sampling Water from Closed Conduits
ASTM D 5673 : 2016 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 1687 : 2002 : R2007 : EDT 1 Standard Test Methods for Chromium in Water
ASTM D 3558 : 2008 Standard Test Methods for Cobalt in Water
ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1066 : 2006 Standard Practice for Sampling Steam
ASTM D 4841 : 1988 : R2013 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 3557 : 2017 Standard Test Methods for Cadmium in Water
ASTM D 5847 : 2002 : R2012 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1066 : 2018 : EDT 1 Standard Practice for Sampling Steam
ASTM D 5673 : 1996 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 2777 : 1998 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D 3370 : 2008 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 3558 : 1994 : R1998 Standard Test Methods for Cobalt in Water
ASTM D 1687 : 1992 Standard Test Methods for Chromium in Water
ASTM D 1691 : 2012 Standard Test Methods for Zinc in Water
ASTM D 5847 : 2002 : R2020 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2002 Standard Terminology Relating to Water
ASTM D 1688 : 1990 Standard Test Methods for Copper in Water
ASTM D 1687 : 2017 Standard Test Methods for Chromium in Water
ASTM D 1066 : 1997 : R2001 Standard Practice for Sampling Steam
ASTM D 5810 : 1996 : R2006 Standard Guide for Spiking into Aqueous Samples
ASTM D 1068 : 2003 Standard Test Methods for Iron in Water
ASTM D 3558 : 2003 Standard Test Methods for Cobalt in Water
ASTM D 1688 : 1995 Standard Test Methods for Copper in Water
ASTM D 1687 : 2012 Standard Test Methods for Chromium in Water
ASTM D 3919 : 2008 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 3557 : 1990 Standard Test Methods for Cadmium in Water
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 5673 : 2003 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 3558 : 2015 Standard Test Methods for Cobalt in Water
ASTM D 1066 : 2011 Standard Practice for Sampling Steam
ASTM D 1129 : 2004 Standard Terminology Relating to Water
ASTM D 5673 : 2010 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry
ASTM D 2777 : 2008 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1691 : 2002 Standard Test Methods for Zinc in Water
ASTM D 1691 : 2002 : R2007 : EDT 1 Standard Test Methods for Zinc in Water
ASTM D 1688 : 2017 Standard Test Methods for Copper in Water
ASTM D 2777 : 2006 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 3559 : 2003 Standard Test Methods for Lead in Water
ASTM D 3557 : 2012 Standard Test Methods for Cadmium in Water
ASTM D 3557 : 2002 Standard Test Methods for Cadmium in Water
ASTM D 3370 : 2018 Standard Practices for Sampling Water from Flowing Process Streams
ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
ASTM D 5847 : 2002 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1068 : 2010 Standard Test Methods for Iron in Water
ASTM D 3919 : 1999 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D 3370 : 1976 Standard Practices for Sampling Water
ASTM D 1068 : 2015 Standard Test Methods for Iron in Water
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 4841 : 1988 : R2013 : EDT 1 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
ASTM D 3557 : 1995 Standard Test Methods for Cadmium in Water
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 Standard Practices for Sampling Water from Closed Conduits
ASTM D 5673 : 2002 Standard Test Method for Elements in Water by Inductively Coupled Plasma—Mass Spectrometry
ASTM D 1068 : 1996 Standard Test Methods for Iron in Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 1129 : 2010 Standard Terminology Relating to Water
ASTM D 5810 : 1996 Standard Guide for Spiking into Aqueous Samples
ASTM D 3370 : 2007 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
ASTM D 1129 : 2001 Standard Terminology Relating to Water
ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 2777 : 2008 : EDT 1 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 3559 : 2015 Standard Test Methods for Lead in Water (Withdrawn 2024)
ASTM D 5810 : 1996 : R2015 Standard Guide for Spiking into Aqueous Samples
ASTM D 1688 : 2007 Standard Test Methods for Copper in Water

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.