• There are no items in your cart

ASTM D 2454 : 2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Determining the Effect of Overbaking on Organic Coatings
Available format(s)

Hardcopy , PDF

Superseded date

03-17-2023

Language(s)

English

Published date

07-24-2018

1.1This practice covers the determination of the time-temperature effect of overbaking on the physical and chemical properties of organic coatings.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 01
DocumentType
Standard Practice
Pages
3
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 3794 : 2022 Standard Guide for Testing Coil Coatings
ASTM D 3794 : 2018 Standard Guide for Testing Coil Coatings
ASTM D 3322 : 1982 : R2017 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
ASTM D 3451 : 2006 : R2017 Standard Guide for Testing Coating Powders and Powder Coatings

ASTM D 1730 : 2009 : R2014 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 3363 : 2022 Standard Test Method for Film Hardness by Pencil Test
ASTM E 805 : 2022 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D 2244 : 2021 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 6386 : 2022 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D 2201 : 2018 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
ASTM D 2244 : 2015 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 609 : 2017 : R2022 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D 1729 : 2016 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 2201 : 1999 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
ASTM D 3363 : 2000 Standard Test Method for Film Hardness by Pencil Test
ASTM D 7091 : 2022 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 2197 : 1998 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 3359 : 1997 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1731 : 1967 : R1998 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
ASTM D 2244 : 2016 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2794 : 1992 Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 6386 : 2016 : REV A Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D 2244 : 2015 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3363 : 2020 Standard Test Method for Film Hardness by Pencil Test
ASTM D 6386 : 2016 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D 7396 : 2014 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D 6386 : 1999 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D 2244 : 2015 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1730 : 1967 : R1998 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
ASTM D 7091 : 2020 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7396 : 2007 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D 1640 : 1983 : R1989 : EDT 1 Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
ASTM D 1731 : 2009 : R2014 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting
ASTM D 3359 : 2022 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 1308 : 1979 : R1981 : EDT 1 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM E 805 : 2012 : REV A : R2017 Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
ASTM D 823 : 2018 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 2244 : 2022 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1308 : 1987 : R1998 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 7091 : 2021 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 1729 : 1996 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 7091 : 2005 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 1729 : 2022 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 2201 : 2022 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
ASTM D 2197 : 2016 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 609 : 2017 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D 2244 : 1993 : R2000 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D 3359 : 2017 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 823 : 2018 : R2022 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 1005 : 1995 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 7396 : 2014 : R2020 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D 2197 : 2016 : R2022 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.