|
ASTM D 7608 : 2018
|
Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
|
|
ASTM D 4083 : 1989 : R2016
|
Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
|
|
ASTM D 5101 : 2012 : R2017
|
Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems
|
|
ASTM D 6001 : 2005 : R2012
|
Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
|
|
ASTM C 1733 : 2017 : REV A
|
Standard Test Method for Distribution Coefficients of Inorganic Species by the Batch Method
|
|
ASTM D 1557 : 2012 : EDT 1
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>))
|
|
ASTM D 2937 : 2017 : EDT 2
|
Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
|
|
ASTM D 4186/D4186M : 2012 : EDT 1
|
Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
|
|
ASTM D 4546 : 2014 : EDT 1
|
Standard Test Methods for One-Dimensional Swell or Collapse of Soils
|
|
ASTM D 6938 : 2017 : REV A
|
Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
|
|
ASTM D 698 : 2012 : EDT 2
|
Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>))
|
|
ASTM E 3163 : 2018
|
Standard Guide for Selection and Application of Analytical Methods and Procedures Used during Sediment Corrective Action
|
|
ASTM D 8167/D8167M : 2018 : REV A
|
Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)
|
|
ASTM D 2573/D2573M : 2018
|
Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
|
|
ASTM D 5299/D5299M : 2018
|
Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
|
|
ASTM D 7015/D7015M : 2018
|
Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
|
|
ASTM D 1586/D1586M : 2018
|
Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
|
|
ASTM D 3213 : 2019
|
Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
|
|
ASTM D 4972 : 2019
|
Standard Test Methods for pH of Soils
|
|
ASTM D 5567 : 1994 : R2018
|
Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
|
|
ASTM D 3385 : 2018
|
Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
|
|
ASTM D 7263 : 2009 : R2018 : EDT 2
|
Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
|
|
ASTM D 2321 : 2018
|
Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
|
|
ASTM E 1197 : 2012
|
Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
|
|
ASTM D 1140 : 2017
|
Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing
|
|
ASTM D 1883 : 2016
|
Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
|
|
ASTM D 2487 : 2017
|
Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
|
|
ASTM D 2774 : 2012
|
Standard Practice for Underground Installation of Thermoplastic Pressure Piping
|
|
ASTM D 2850 : 2015
|
Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
|
|
ASTM F 1668 : 2016
|
Standard Guide for Construction Procedures for Buried Plastic Pipe
|
|
ASTM D 3839 : 2014
|
Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
|
|
ASTM D 4050 : 2014
|
Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems
|
|
ASTM D 4221 : 2018
|
Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
|
|
ASTM D 4253 : 2016
|
Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
|
|
ASTM D 4254 : 2016
|
Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
|
|
ASTM D 4700 : 2015
|
Standard Guide for Soil Sampling from the Vadose Zone (Withdrawn 2024)
|
|
ASTM D 420 : 2018
|
Standard Guide for Site Characterization for Engineering Design and Construction Purposes
|
|
ASTM D 425 : 2017
|
Standard Test Method for Centrifuge Moisture Equivalent of Soils
|
|
ASTM D 5434 : 2012
|
Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021)
|
|
ASTM D 6066 : 2011
|
Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Withdrawn 2020)
|
|
ASTM D 6286 : 2012
|
Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
|
|
ASTM C 12 : 2017
|
Standard Practice for Installing Vitrified Clay Pipe Lines
|
|
ASTM D 6519 : 2015
|
Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
|
|
ASTM D 6528 : 2017
|
Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Fine Grain Soils
|
|
ASTM C 1479 : 2016
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
|
|
ASTM C 1479M : 2016
|
Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
|
|
ASTM D 4648/D4648M : 2016
|
Standard Test Methods for Laboratory Miniature Vane Shear Test for Saturated<brk/>Fine-Grained Clayey Soil
|
|
ASTM D 2435/D2435M : 2011
|
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
|
|
ASTM D 3080/D3080M : 2011
|
Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions (Withdrawn 2020)
|
|
ASTM D 4647/D4647M : 2013
|
Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
|
|
ASTM D 2166/D2166M : 2016
|
Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
|
|
ASTM D 3999/D3999M : 2011 : EDT 1
|
Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020)
|
|
ASTM D 5514/D5514M : 2018
|
Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
|
|
ASTM D 6282/D6282M : 2014
|
Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023)
|
|
ASTM D 5472/D5472M : 2014
|
Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
|
|
ASTM D 6151/D6151M : 2015
|
Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024)
|
|
ASTM D 1587/D1587M : 2015
|
Standard Practice for Thin-Walled Tube Sampling of Fine-Grained Soils for Geotechnical Purposes (Withdrawn 2024)
|
|
ASTM C 1821/C1821M : 2016
|
Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
|
|
ASTM D 7928 : 2017
|
Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
|
|
ASTM D 1452/D1452M : 2016
|
Standard Practice for Soil Exploration and Sampling by Auger Borings
|
|
ASTM D 5092/D5092M : 2016
|
Standard Practice for Design and Installation of Groundwater Monitoring Wells
|
|
ASTM D 6914/D6914M : 2016
|
Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
|
|
ASTM D 3550/D3550M : 2017
|
Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
|
|
ASTM D 6913/D6913M : 2017
|
Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
|
|
ASTM D 8140 : 2018
|
Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.