DIN 51563:2011-04
|
Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
|
MIL H 17672 : D
|
HYDRAULIC FLUID, PETROLEUM, INHIBITED
|
ASTM D 2422 : 1997 : R2013
|
Standard Classification of Industrial Fluid Lubricants by Viscosity System
|
FAA AC 43-207 : 2002
|
CORRELATION, OPERATION, DESIGN, AND MODIFICATION OF TURBOFAN/JET ENGINE TEST CELLS
|
SAE J 357 : 2016
|
PHYSICAL AND CHEMICAL PROPERTIES OF ENGINE OILS
|
ASTM D 7945 : 2016 : REDLINE
|
Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
|
ASTM D 6074 : 2015 : REDLINE
|
Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils
|
ASTM D 7152 : 2011 : R2016
|
Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
|
ASTM D 7416 : 2009 : R2015
|
Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integrated Tester
|
ASTM D 2270 : 2010 : EDT 1
|
Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
|
SAE ARP 4990B : 2015
|
TURBINE FLOWMETER FUEL FLOW CALCULATIONS
|
ASTM D 2422 : 1997 : R2007
|
Standard Classification of Industrial Fluid Lubricants by Viscosity System
|
AASHTO T 167 : 2010 : R2015
|
METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT
|
SAE AS 5780 : 2018
|
SPECIFICATION FOR AERO AND AERO-DERIVED GAS TURBINE ENGINE LUBRICANTS
|
ASTM D 2422 : 1997
|
Standard Classification of Industrial Fluid Lubricants by Viscosity System
|
ASHRAE HDBK REFRIGERATION : 2014
|
ASHRAE HANDBOOK - REFRIGERATION
|
SAE ARP 6157 : 2017
|
WAM PRESSURE-VISCOSITY COEFFICIENT MEASUREMENT
|
ASTM D 7416 : 2009
|
Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome
|
PD ISO/TR 18792:2008
|
Lubrication of industrial gear drives
|
NFPA T2.13.13 : 2002 : R2015
|
RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS
|
AASHTO T 167 : 2010
|
METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HOT MIX ASPHALT
|
ASTM D 2270 : 2010 : R2016
|
Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C
|
ISO 81400-4:2005
|
Wind turbines Part 4: Design and specification of gearboxes
|
CAN/CSA-C50-14 (R2018)
|
Mineral insulating oil, electrical, for transformers and switches
|
ASTM D 2493/D2493M : 2016 : REDLINE
|
Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
|
ASTM D 7152 : 2011
|
Standard Practice for Calculating Viscosity of a Blend of Petroleum Products
|
ASTM D 2493 : 2001 : EDT 1
|
Standard Viscosity-Temperature Chart for Asphalts
|
BS ISO 81400-4:2005
|
Wind turbines Design and specification of gearboxes
|
NFPA T2.13.13 : 2002 : R2010
|
RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS
|
ASTM D 5133 : 2015 : REDLINE
|
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
|
ASTM D 2270 : 2010
|
Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C
|
ASTM D 2493 : 2001
|
Standard Viscosity-Temperature Chart for Asphalts
|
ASTM D 2422 : 1997 : R2002
|
Standard Classification of Industrial Fluid Lubricants by Viscosity System
|