• There are no items in your cart

ASTM D 3794 : 2018

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Testing Coil Coatings
Available format(s)

Hardcopy , PDF

Superseded date

07-14-2022

Language(s)

English

Published date

07-02-2018

1.1This guide covers procedures for testing coil coatings. The test methods included are listed in Table 1. Where more than one test method is listed for the same characteristic, no attempt is made to indicate superiority of one method over another. Selection of test methods to be followed must be governed by the requirements in each individual case, together with agreement between the producer and user.1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

1.1This guide covers procedures for testing coil coatings. The test methods included are listed in Table 1. Where more than one test method is listed for the same characteristic, no attempt is made to indicate superiority of one method over another. Selection of test methods to be followed must be governed by the requirements in each individual case, together with agreement between the producer and user.

1.2The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 01
DocumentType
Guide
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM G 195 : 2018 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G 195 : 2022 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM D 5796 : 2010 : R2015 Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device

ASTM D 2196 : 2015 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
ASTM C 1371 : 2004 : REV A : R2010 : EDT 1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1545 : 2005 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D 3960 : 2005 : R2018 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 1212 : 1991 : R2013 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 1005 : 1995 : R2020 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM E 1808 : 1996 Standard Guide for Designing and Conducting Visual Experiments
ASTM D 3170 : 1987 : R1996 : EDT 1 Standard Test Method for Chipping Resistance of Coatings
ASTM D 2454 : 2014 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D 2697 : 2003 : R2008 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 7376 : 2010 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 3278 : 2020 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM E 1918 : 2021 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM D 1475 : 2013 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 1210 : 1996 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D 6492 : 1999 : R2016 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 6695 : 2003 : REV A Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 4138 : 2007 : REV A : R2022 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 2196 : 2010 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 1014 : 2009 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates (Withdrawn 2018)
ASTM D 1475 : 1998 : R2012 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 3359 : 2009 : EDT 2 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 2244 : 2021 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3363 : 2005 : R2011 : EDT 2 Standard Test Method for Film Hardness by Pencil Test (Withdrawn 2020)
ASTM D 1824 : 1995 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 5178 : 2021 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 3960 : 2002 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 2247 : 2010 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 2803 : 2003 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 2248 : 2001 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 5796 : 2010 : R2015 Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D 2697 : 2003 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM E 1808 : 1996 : R2015 Standard Guide for Designing and Conducting Visual Experiments
ASTM B 368 : 2009 : R2014 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM D 3960 : 2001 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 2454 : 2008 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D 4138 : 1994 : R2001 : EDT 1 Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
ASTM D 2248 : 2001 : REV A : R2018 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 5796 : 2003 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM C 1549 : 2016 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 3361 : 2001 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D 2197 : 1998 : R2002 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 2244 : 2015 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1735 : 2021 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 5894 : 2005 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 2248 : 2001 : REV A Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 2196 : 2005 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 3003 : 2001 : R2016 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D 1308 : 2002 : R2013 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 4587 : 1991 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 7869 : 2017 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM D 5402 : 2006 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM E 1164 : 2007 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 3960 : 2005 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 6093 : 1997 : R2016 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 5178 : 2013 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 1475 : 1985 Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
ASTM D 3361 : 2001 : R2006 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D 6578 : 2000 Standard Practice for Determination of Graffiti Resistance
ASTM D 6492 : 1999 : R2003 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 7897 : 2015 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
ASTM D 3361 : 1993 Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D 5031 : 2001 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D 2369 : 1998 Standard Test Method for Volatile Content of Coatings
ASTM D 2244 : 2011 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 3278 : 1996 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM G 153 : 2013 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM E 1545 : 2022 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D 6944 : 2009 : EDT 1 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D 1735 : 1999 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 6093 : 1997 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 1729 : 2016 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM E 1640 : 2013 : R2018 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 7869 : 2013 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
ASTM D 1200 : 2010 : R2018 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 6695 : 2003 : REV B Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 5723 : 1995 : R2015 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D 5531 : 2017 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 6093 : 1997 : R2003 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM D 3960 : 2005 : R2013 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings
ASTM D 2244 : 2009 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1824 : 2016 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 2197 : 2013 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 6492 : 1999 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 6578 : 2008 Standard Practice for Determination of Graffiti Resistance
ASTM D 3363 : 2000 Standard Test Method for Film Hardness by Pencil Test
ASTM D 7091 : 2022 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 1212 : 1991 : R2007 : EDT 1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E 1980 : 1998 : EDT 1 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
ASTM D 6492 : 1999 : R2011 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 2197 : 1998 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 6944 : 2015 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D 4138 : 2007 : REV A : R2013 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 2454 : 2018 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D 2247 : 2011 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 1212 : 1991 : R2020 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E 1640 : 2009 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 3134 : 2015 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 5894 : 2021 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 3359 : 1997 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM E 1164 : 2009 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 2244 : 2002 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 2247 : 2002 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 2244 : 2016 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 7639 : 2010 : R2014 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM E 1640 : 2004 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 6906 : 2012 : REV A Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D 3003 : 2001 : R2006 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D 4060 : 2007 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 2794 : 1992 Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 1654 : 2005 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 2369 : 1981 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 5531 : 2005 : R2011 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM C 1371 : 1998 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 6695 : 2001 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 2369 : 2001 Standard Test Method for Volatile Content of Coatings
ASTM D 3363 : 2005 Standard Test Method for Film Hardness by Pencil Test
ASTM D 2244 : 2015 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 7639 : 2010 : R2018 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 2244 : 2009 : REV B Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 1200 : 2010 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D 4147 : 1999 : R2013 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
ASTM E 1356 : 2008 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D 1475 : 1998 : R2003 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 2244 : 2002 : EDT 1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 7376 : 2007 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 4147 : 2018 Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars
ASTM D 6491 : 2009 : R2016 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM D 2247 : 1992 Standard Practice for Testing Water Reistence of Coatings in 100% Relative Humidity
ASTM D 2369 : 2010 Standard Test Method for Volatile Content of Coatings
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 1474 : 1998 : R2002 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D 1005 : 1995 : R2001 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 3170 : 2003 Standard Test Method for Chipping Resistance of Coatings
ASTM D 6906 : 2003 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D 6906 : 2011 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM E 1545 : 2011 : R2016 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D 5031 : 1996 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D 2244 : 2015 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4141 : 2007 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 4147 : 1999 : R2007 : EDT 1 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
ASTM D 2697 : 2003 : R2014 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 5031 : 2001 : R2006 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D 3278 : 1982 : EDT 1 Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 7091 : 2020 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 3278 : 2021 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 6695 : 2008 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM D 2247 : 2015 Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D 1200 : 2010 : R2014 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM E 1541 : 1998 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D 1823 : 1995 : R2001 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D 1210 : 2005 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D 2697 : 1986 : R1998 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM E 1980 : 2001 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces (Withdrawn 2010)
ASTM D 6906 : 2012 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D2092 : 1995 Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 2697 : 2003 : R2021 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 2454 : 1995 Standard Practice for Determining the Effect of Overbaking on Organic Coatings
ASTM D 6944 : 2003 Standard Test Method for Resistance of Cured Coatings to Thermal Cycling
ASTM E 1808 : 1996 : R2021 Standard Guide for Designing and Conducting Visual Experiments
ASTM D 3359 : 2009 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 4585 : 1999 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
ASTM D 5402 : 2019 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 1735 : 2014 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 4587 : 2001 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM C 1549 : 2002 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 1729 : 1996 : R2009 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 2248 : 2001 : REV A : R2013 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 4060 : 2001 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 4287 : 2000 : R2010 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM G 152 : 2013 : R2021 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 2369 : 2020 Standard Test Method for Volatile Content of Coatings
ASTM D 2803 : 2009 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 6491 : 2009 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM D 6093 : 1997 : R2011 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer
ASTM E 84 : 2020 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 4147 : 1999 : R2003 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
ASTM D 1475 : 1960 : R1968 Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products
ASTM D 2196 : 2018 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscountess
ASTM D 3960 : 1998 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 5178 : 1998 : R2002 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 2244 : 2014 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM D 5894 : 2010 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 5531 : 1994 : R2003 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 1729 : 1996 : R2003 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 5178 : 1998 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 1210 : 2005 : R2014 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D 3359 : 2002 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1200 : 1970 Standard Method Of Test For Viscosity Of Paints, Varnishes, And Lacquers By Ford Viscosity Cup
ASTM D 4141 : 2001 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 6695 : 2016 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM G 155 : 2021 Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
ASTM D 3359 : 2009 : EDT 1 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 1823 : 1995 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D 1308 : 2002 : EDT 1 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 3363 : 2005 : R2011 : EDT 1 Standard Test Method for Film Hardness by Pencil Test
ASTM D 4287 : 2000 : R2014 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 2794 : 1993 : R1999 : EDT 1 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 2244 : 2005 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D 4214 : 1998 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007)
ASTM D 4287 : 2000 : R2019 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 2369 : 2007 Standard Test Method for Volatile Content of Coatings
ASTM D 1824 : 1966 : R1972 Standard Method Of Test For Apparent Viscosity Of Plastisols And Organosols At Low Shear Rates By Brookfield Viscometer
ASTM D 4287 : 2000 : R2005 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 1212 : 1991 : R2001 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM E 1640 : 1999 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 4145 : 2010 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D 4146 : 2010 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
ASTM D 1475 : 1998 : R2008 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM E 1164 : 2012 : EDT 1 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 5894 : 2016 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D 2369 : 2010 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 1005 : 1995 : R2013 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 3003 : 1994 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D 5723 : 1995 : R2010 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D 1200 : 1994 : R2005 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM E 1356 : 2003 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM D 4138 : 1994 : R1999 Standard Test Methods for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive Means
ASTM D 3170 : 2012 Standard Test Method for Chipping Resistance of Coatings
ASTM D 2794 : 1993 : R2004 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 6665 : 2009 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM D 3359 : 2007 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM D 3003 : 2001 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D 1210 : 2005 : R2010 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D 1824 : 1995 : R2010 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 1200 : 1994 : R1999 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D 1308 : 1979 : R1981 : EDT 1 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM C 1371 : 2015 : R2022 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1164 : 1994 Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM D 4212 : 1999 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D 1474 : 1998 : R2008 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D 7376 : 2010 : REV A : R2016 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 4214 : 2007 : R2015 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 1735 : 2004 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 5531 : 2005 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM D 4214 : 2007 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D 2247 : 2015(R2020) Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
ASTM D 7091 : 2013 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 2369 : 1993 Standard Test Method for Volatile Content of Coatings
ASTM G 153 : 2013 : R2021 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 6491 : 1999 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM D 1212 : 1991 : R1996 : EDT 1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 2248 : 1993 Standard Practice for Detergent Resistance of Organic Finishes
ASTM D 1823 : 1995 : R2009 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM E 1980 : 2011 : R2019 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
ASTM D 3134 : 2015 : R2019 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 4146 : 1996 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
ASTM B 368 : 2021 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)
ASTM D 3170 : 2003 : R2007 Standard Test Method for Chipping Resistance of Coatings
ASTM E 1918 : 2016 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM D 3170 : 2001 Standard Test Method for Chipping Resistance of Coatings
ASTM C 1371 : 2004 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 5531 : 1994 : R1999 Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings
ASTM E 1808 : 1996 : R2003 Standard Guide for Designing and Conducting Visual Experiments
ASTM D 6906 : 2011 : REV A Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D 4212 : 2010 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D 2197 : 2010 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 1654 : 2008 : R2016 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 4585 : 2007 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
ASTM E 1356 : 2008 : R2014 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry (Withdrawn 2023)
ASTM E 1918 : 2006 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM D 2244 : 2007 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM G 85 : 1998 Standard Practice for Modified Salt Spray (Fog) Testing
ASTM D 1735 : 2008 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 823 : 2018 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 5178 : 1998 : R2008 Standard Test Method for Mar Resistance of Organic Coatings
ASTM E 1545 : 2011 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM G 152 : 2013 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM D 3134 : 1997 : R2003 Standard Practice for Establishing Color and Gloss Tolerances
ASTM E 1545 : 2000 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM D 5796 : 2003 : R2010 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D 7897 : 2018 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
ASTM D 1654 : 1992 : R2000 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 1308 : 1987 : R1998 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 2197 : 1986 : R1991 : EDT 1 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 1014 : 1995 Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel
ASTM D 7091 : 2021 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 7091 : 2012 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 4587 : 2011 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM G 155 : 2013 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM E 1541 : 1998 : R2003 Standard Practice for Specifying and Matching Color Using the Colorcurve System (Withdrawn 2007)
ASTM D 5723 : 1995 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D 1729 : 1996 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 3134 : 1997 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 4287 : 2000 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 1212 : 1991 : R2007 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 2197 : 1998 : R2004 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 4060 : 1995 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 6906 : 2012 : REV A : R2016 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D 5796 : 2010 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D 6665 : 2009 : R2014 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM D 6695 : 2003 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
ASTM E 1164 : 2002 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 6665 : 2001 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
ASTM E 1164 : 2012 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 4146 : 2010 : R2018 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
ASTM D 5796 : 1999 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
ASTM D 3134 : 1997 : R2008 : EDT 1 Standard Practice for Establishing Color and Gloss Tolerances
ASTM D 6492 : 1999 : R2022 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
ASTM D 7091 : 2005 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
ASTM D 1729 : 2022 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D 6944 : 2009 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
ASTM D 4212 : 2010 : R2014 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D 4145 : 1983 : R1996 : EDT 1 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D 2197 : 2016 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM D 2369 : 1995 Standard Test Method for Volatile Content of Coatings
ASTM D 6944 : 2015 : R2020 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling
ASTM D 5178 : 2016 Standard Test Method for Mar Resistance of Organic Coatings
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM C 1371 : 2004 : REV A Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM D 3363 : 2005 : R2011 Standard Test Method for Film Hardness by Pencil Test
ASTM D 4138 : 2007 : REV A : R2017 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM E 1356 : 1998 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM D 1005 : 1995 : R2007 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 2369 : 2004 Standard Test Method for Volatile Content of Coatings
ASTM D 1014 : 2002 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
ASTM D 2248 : 2001 : REV A : R2007 Standard Practice for Detergent Resistance of Organic Finishes
ASTM C 1549 : 2009 : R2014 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 3359 : 2008 Standard Test Methods for Measuring Adhesion by Tape Test
ASTM G 113 : 2016 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM D 4287 : 1994 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 2794 : 1993 : R2019 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 1735 : 2002 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
ASTM D 3960 : 2004 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D 1308 : 2002 : R2007 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 1654 : 2008 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM E 1640 : 2013 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 2369 : 1990 Standard Test Method for Volatile Content of Coatings
ASTM D 1654 : 2008 : R2016 : EDT 1 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D 1474 : 1998 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D 2196 : 2018 : EDT 1 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
ASTM D 5402 : 2006 : R2011 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 5402 : 1993 : R1999 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM D 2244 : 2009 : REV A Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E 1980 : 2011 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
ASTM C 1549 : 2004 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 4145 : 1983 : R2002 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D 7376 : 2010 : REV A Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 1212 : 1991 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings
ASTM D 2369 : 2003 Standard Test Method for Volatile Content of Coatings
ASTM D 2244 : 1993 : R2000 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D 1823 : 2016 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D 4141 : 1995 Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings
ASTM D 2803 : 2009 : R2015 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 3003 : 2001 : R2012 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
ASTM D 2247 : 1968 : R1973 Standard Method for Testing Coated Metal Specimens At 100% Relative Humidity
ASTM D 1824 : 1995 : R2002 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D 4138 : 2007 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 2794 : 1993 : R2010 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D 2803 : 2009 : R2020 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
ASTM D 7376 : 2010 : REV A : R2022 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
ASTM D 1475 : 1998 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ASTM D 3359 : 2017 Standard Test Methods for Rating Adhesion by Tape Test
ASTM D 2369 : 2010 : R2015 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 4587 : 2005 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D 3278 : 1996 : R2004 : EDT 1 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 2196 : 1999 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D 823 : 2018 : R2022 Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
ASTM D 2369 : 1987 Standard Test Method for Volatile Content of Coatings
ASTM D 4147 : 1999 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM E 1164 : 2012 : R2017 : EDT 1 Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
ASTM D 1005 : 1995 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D 2247 : 1999 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D 4060 : 2014 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 5894 : 1996 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM E 1640 : 2018 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM D 5723 : 1995 : R2002 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D 4060 : 2010 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 4145 : 2010 : R2018 Standard Test Method for Coating Flexibility of Prepainted Sheet
ASTM D 2369 : 2001 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM E 1808 : 1996 : R2009 Standard Guide for Designing and Conducting Visual Experiments
ASTM C 1371 : 2015 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
ASTM E 1918 : 1997 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field (Withdrawn 2006)
ASTM E 1918 : 2006 : R2015 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
ASTM G 113 : 2022 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
ASTM D 7639 : 2010 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
ASTM D 6906 : 2012 : REV A : R2021 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
ASTM D 2369 : 1992 Standard Test Method for Volatile Content of Coatings
ASTM D 1308 : 2002 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D 4060 : 2019 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D 6906 : 2003 : R2010 : EDT 1 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
ASTM D 5402 : 2015 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
ASTM C 1549 : 2009 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
ASTM D 4518 : 1991 Standard Test Methods for Measuring Static Friction of Coating Surfaces (Withdrawn 2000)
ASTM D 3278 : 1996 : R2011 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020)
ASTM D 4138 : 2007 : REV A Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means
ASTM D 4212 : 2016 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D 6491 : 1999 : R2003 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
ASTM D 2803 : 1993 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal (Withdrawn 2002)
ASTM G 87 : 1998 Standard Practice for Conducting Moist SO<sub>2</sub> Tests

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.