ASTM D 3856 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
Hardcopy , PDF
01-08-2024
English
11-15-2011
CONTAINED IN VOL. 11.01, 2018 Gives information on consensus good laboratory practices for laboratories that provide services in the sampling and analysis of water.
1.1 This guide provides information on consensus good laboratory practices for laboratories that provide services in the sampling and analysis of water. As consensus standards, these are the minimum criteria that all laboratories should consider in establishing their good laboratory practices.
1.2 This guide is designed to be used by those responsible for the selection, operation, or control of laboratory organizations engaged in sampling and analysis of water.
1.3 This guide presents features of organization, facilities, resources, and operations which affect the usefulness of the data generated.
1.4 This guide presents criteria for selection and control of the features described in and also makes recommendations for the correction of unacceptable performance.
1.5 This guide describes methodology and practices intended to be completely consistent with the International Organization for Standardization (ISO) 9000 series of standards and Guide 25 - 1990
1.6 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 19
|
| DocumentType |
Guide
|
| Pages |
12
|
| ProductNote |
Reconfirmed 2011
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7645 : 2016 | Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 7598 : 2016 : R2017 | Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 7065 : 2017 | Standard Test Method for Determination of Nonylphenol, Bisphenol A, <emph type="bdit" >p-tert</emph>-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry |
| ASTM D 7066 : 2004 : R2017 | Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination |
| ASTM D 4282 : 2015 | Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion |
| ASTM D 3694 : 1996 : R2017 | Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 5174 : 2007 : R2013 | Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry (Withdrawn 2022) |
| ASTM D 7572 : 2015 | Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil |
| ASTM D 4193 : 2008 : R2013 : EDT 1 | Standard Test Method for Thiocyanate in Water |
| ASTM D 6994 : 2015 | Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection |
| ASTM D 5316 : 1998 : R2017 | Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography |
| ASTM D 7365 : 2009 : REV A : R2015 | Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide |
| ASTM D 5765 : 2016 | Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating |
| ASTM D 6889 : 2003 : R2017 | Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME) |
| ASTM D 7284 : 2013 : R2017 | Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7979 : 2017 | Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 8024 : 2016 | Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS) |
| ASTM D 6501 : 2015 | Standard Test Method for Phosphonate in Brines |
| ASTM D 7644 : 2016 | Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 4785 : 2008 : R2013 : EDT 1 | Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water |
| ASTM D 3370 : 2018 | Standard Practices for Sampling Water from Flowing Process Streams |
| ASTM D 5317 : 1998 : R2017 | Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector |
| ASTM D 4129 : 2005 : R2013 | Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection |
| ASTM D 7283 : 2017 | Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting |
| ASTM D 4165 : 2006 : R2012 | Standard Test Method for Cyanogen Chloride in Water |
| ASTM D 7597 : 2016 : R2017 | Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 5241 : 1992 : R2017 | Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water |
| ASTM D 8025 : 2016 | Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry |
| ASTM D 7600 : 2016 : R2017 | Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 7485 : 2016 | Standard Test Method for Determination of Nonylphenol, p-<emph type="bdit">tert</emph >-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 5788 : 1995 : R2017 | Standard Guide for Spiking Organics into Aqueous Samples |
| ASTM D 5542 : 2016 | Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography |
| ASTM D 5952 : 2008 : R2015 | Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever) (Withdrawn 2024) |
| ASTM D 6888 : 2016 | Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ASTM D 7742 : 2017 | Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 5847 : 2002 : R2012 | Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ASTM D 6238 : 1998 : R2017 | Standard Test Method for Total Oxygen Demand in Water |
| ASTM D 1971 : 2016 | Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry |
| ASTM D 6919 : 2017 | Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography |
| ASTM D 7599 : 2016 : R2017 | Standard Test Method for Determination of Diethanolamine, Triethanolamine, <emph type="ital">N</emph>-Methyldiethanolamine and <emph type="ital">N</emph >-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS) |
| ASTM D 7574 : 2016 | Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry |
| ASTM D 6520 : 2018 | Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds |
| ASTM D 3695 : 1995 : R2013 | Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography |
| ASTM D 2580 : 2006 : R2012 | Standard Test Method for Phenols in Water by Gas-Liquid Chromatography (Withdrawn 2021) |
| ASTM D 596 : 2001 : R2018 | Standard Guide for Reporting Results of Analysis of Water |
| ASTM D 5612 : 1994 : R2018 | Standard Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
| ASTM D 7511 : 2012 : R2017 : EDT 1 | Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection |
| ASTM D 5810 : 1996 : R2015 | Standard Guide for Spiking into Aqueous Samples |
| ASTM D 5175 : 1991 : R2017 : EDT 1 | Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography |
| ASTM D 8001 : 2016 : EDT 1 | Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography |
| ASTM D 7237 : 2018 | Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM D 4840 : 1999 | Standard Guide for Sampling Chain-of-Custody Procedures |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ASTM D 2777 : 2013 : REDLINE | Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water |
| ASTM D 4447 : 2015 : REDLINE | Standard Guide for Disposal of Laboratory Chemicals and Samples |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.