• There are no items in your cart

ASTM D 3925 : 2002 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings
Available format(s)

Hardcopy , PDF

Superseded date

12-10-2022

Language(s)

English

Published date

06-12-2015

CONTAINED IN VOL. 06.01, 2017 Specifies methods of taking representative samples of fluid paint or pigmented coating products from containers of any type.

1.1This practice describes methods of taking representative samples of fluid paint or pigmented coating products from containers of any type.

1.2Two ISO standards, ISO 1513 and ISO 15528, cover the details and equipment for sampling of liquid paints and associated materials in much greater detail than this standard. The reader is referred to those standards for more information.

1.3The sampling of dry powder paints, clear coatings, mixed solvents, and nonpigmented materials of any type is not covered in this procedure.

1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 01
DocumentType
Standard Practice
Pages
3
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6577 : 2015 : R2019 Standard Guide for Testing Industrial Protective Coatings
ASTM D 5913 : 1996(R2019) Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM D 5895 : 2020 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D 8008 : 2020 Standard Practice for Representative Field Sampling of Traffic Paints
ASTM D 2369 : 2020 Standard Test Method for Volatile Content of Coatings
ASTM D 5286 : 2020 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
ASTM F 940 : 1999 : R2019 : EDT 1 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM D 7073 : 2020 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
ASTM E 1795 : 2020 : REV A Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 7836 : 2013 : R2020 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
ASTM D 7867 : 2013 : R2020 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
ASTM D 5125 : 2010 : R2020 : EDT 1 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D 7245 : 2009 : R2021 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM D 5380 : 1993 : R2021 Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM D 5381 : 1993 : R2021 Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM D 5327 : 1997 : R2021 : EDT 1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D 3278 : 2021 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D 6904 : 2003 : R2022 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
ASTM D 5326 : 2022 Standard Test Method for Color Development in Tinted Latex Paints
ASTM D 4143 : 2016 : R2022 Standard Guide for Testing Latex Vehicles
ASTM D 6438 : 2005 : R2022 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D 2697 : 2022 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 5150 : 1992 : R2017 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
ASTM D 5498 : 2012 : REV A : R2018 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
ASTM D 7245 : 2009 : R2014 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating
ASTM D 5895 : 2013 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
ASTM D 5326 : 1994 : REV A : R2013 Standard Test Method for Color Development in Tinted Latex Paints
ASTM F 940 : 1999 : R2013 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
ASTM D 7395 : 2018 Standard Test Method for Cone/Plate Viscosity at a 500 s<sup>-1</sup> Shear Rate
ASTM E 1797 : 2012 : R2017 : EDT 1 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 4359 : 1990 : R2019 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
ASTM D 4948 : 1989 : R2016 Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid
ASTM D 7088 : 2017 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
ASTM D 7358 : 2007 : R2018 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit
ASTM D 7867 : 2013 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
ASTM D 5327 : 1997 : R2013 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
ASTM D 5913 : 1996 : R2013 Standard Test Method for Evaluation of Cleanability of Paint Brushes
ASTM D 5381 : 1993 : R2014 Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders
ASTM D 3720 : 1990 : R2019 Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
ASTM D 7073 : 2005 : R2012 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
ASTM D 4707 : 2009 : R2017 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
ASTM D 4143 : 2016 Standard Guide for Testing Latex Vehicles
ASTM D 4287 : 2000 : R2019 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM D 6886 : 2018 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography
ASTM D 7836 : 2013 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials
ASTM D 5009 : 2002 : R2017 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D 1849 : 1995 : R2019 Standard Test Method for Package Stability of Paint
ASTM D 5146 : 2010 : R2019 Standard Guide to Testing Solvent-Borne Architectural Coatings
ASTM D 6904 : 2003 : R2013 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
ASTM D 2369 : 2010 : R2015 : EDT 1 Standard Test Method for Volatile Content of Coatings
ASTM D 5324 : 2016 Standard Guide for Testing Water-Borne Architectural Coatings
ASTM D 8008 : 2015 Standard Practice for Representative Field Sampling of Traffic Paints
ASTM D 6438 : 2005 : R2015 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography
ASTM D 5380 : 1993 : R2014 Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis
ASTM E 1795 : 2017 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM D 3730 : 2017 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
ASTM D 8090 : 2017 Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
ASTM D 2697 : 2003 : R2014 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D 4958 : 2010 : R2016 Standard Test Method for Comparison of the Brush Drag of Latex Paints
ASTM D 6577 : 2015 Standard Guide for Testing Industrial Protective Coatings
ASTM D 5125 : 2010 : R2014 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
ASTM D 6763 : 2016 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
ASTM D 4764 : 2001 : R2016 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint
ASTM D 5286 : 2001 : R2017 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
ASTM D 3960 : 2005 : R2018 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings

ASTM D 1475 : 2013 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 1475 : 1998 : R2012 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 1475 : 1985 Standard Test Method for Density of Paint, Varnish, Lacquer, and Related Products
ASTM D 1475 : 1998 : R2003 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
ASTM D 1475 : 1960 : R1968 Standard Method Of Test For Density Of Paint, Varnish, Lacquer, And Related Products
ASTM D 1475 : 1998 : R2008 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ASTM D 1475 : 2013 : REDLINE Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 1475 : 1998 Standard Test Method for Density of Liquid Coatings, Inks, and Related Products

View more information
US$66.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.