• There are no items in your cart

ASTM D 4378 : 2013

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines
Available format(s)

Hardcopy , PDF

Superseded date

09-11-2020

Language(s)

English

Published date

10-01-2013

This practice covers the requirements for the effective monitoring of mineral turbine oils in service in steam and gas turbines, as individual or combined cycle turbines, used for power generation.

1.1This practice covers the requirements for the effective monitoring of mineral turbine oils in service in steam and gas turbines, as individual or combined cycle turbines, used for power generation. This practice includes sampling and testing schedules to validate the condition of the lubricant through its life cycle and by ensuring required improvements to bring the present condition of the lubricant within the acceptable targets. This practice is not intended for condition monitoring of lubricants for auxiliary equipment; it is recommended that the appropriate practice be consulted (see Practice D6224).

1.2This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 02
DocumentType
Standard Practice
Pages
18
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 6971 : 2009 : R2014 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 8185 : 2018 Standard Guide for In-Service Lubricant Viscosity Measurement
ASTM D 6810 : 2013 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 7720 : 2011 : R2017 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 8112 : 2017 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
ASTM D 6439 : 2011 : R2017 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D 7843 : 2018 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
ASTM D 6224 : 2016 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 7590 : 2009 : R2014 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

ASTM D 4898 : 1990 : R2010 : EDT 1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D 6439 : 2005 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D 4057 : 2019 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 6439 : 2011 : R2017 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D 4057 : 1995 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 4898 : 1990 : R2010 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D 2273 : 1997 : R2002 : EDT 1 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 1401 : 2019 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 4898 : 2016 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D 7669 : 2011 Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D 7720:2011 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 7155 : 2006 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 3427 : 2003 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 5185 : 1997 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 2668 : 2002 : EDT 1 Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D 2422 : 1997 : R2007 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 3427 : 2015 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
ASTM D 4057 : 2012 : R2018 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2422 : 1997 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 2273 : 1997 : R2002 : EDT 2 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 6304:2016 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D 6224 : 2016 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 1401 : 2018 : REV B Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 3427 : 2014 : REV A Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 2668 : 2007 : R2013 Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D 2422 : 1997 : R2018 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 6971 : 2009 : R2014 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 6304 : 2004 : REV A : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 2273 : 1997 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 6224 : 1998 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 1401 : 2018 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 5185 : 2005 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1500 : 2004 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1401 : 2009 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 4057 : 1981 : EDT 2 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 5185 : 2002 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1401 : 1998 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 6810 : 2002 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in HL Turbine Oils by Linear Sweep Voltammetry
ASTM D 2668 : 2007 Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D 6971 : 2009 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 6304 : 2007 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration (Withdrawn 2016)
ASTM D 6304 : 2004 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 5185 : 2018 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1500 : 2012 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 6810 : 2013 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 6304 : 2016 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D 3427 : 2002 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 5185 : 2013 : EDT 1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 6304 : 2004 : REV A Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 6439 : 2011 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D 6304 : 2004 : EDT 1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 6224 : 2002 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 7155 : 2011 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 4057 : 2006 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 1500 : 2003 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 7647 : 2010 : R2018 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
ASTM D 1500 : 1982 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 6304 : 2000 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 4057 : 2012 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 3427 : 2014 : REV A : EDT 1 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 5185 : 2013 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1500 : 2002 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 7669 : 2015 Standard Guide for Practical Lubricant Condition Data Trend Analysis
ASTM D 7647 : 2010 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
ASTM D 2272 : 1998 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 1500 : 1998 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1500 : 2012 : R2017 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 6439 : 1999 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
ASTM D 1401 : 2002 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 2273 : 2008 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 7155 : 2020 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 2668 : 2002 Standard Test Method for 2,6-<i>di-tert</i>-Butyl-<i> p</i>-Cresol and 2,6-<ital>di-tert</ital>-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D 4898 : 1990 : R2000 : EDT 1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
ASTM D 6810 : 2007 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 6224 : 2009 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
ASTM D 2272 : 2014 : REV A Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 6304 : 2003 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D 2668 : 1996 Standard Test Method for 2,6-Ditertiary-Butyl Para Cresol and 2,6-Ditertiary-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption
ASTM D 2272 : 2009 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 7155 : 2018 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
ASTM D 5185 : 2009 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 2272 : 2014 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 1401 : 2012 : EDT 1 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 2273 : 2008 : R2012 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 6971 : 2004 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
ASTM D 3427 : 2006 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 2422 : 1997 : R2013 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 2273 : 2005 Standard Test Method for Trace Sediment in Lubricating Oils
ASTM D 3427 : 2007 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 5185 : 2002 : EDT 1 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 2272 : 2002 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 3427 : 2019 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils
ASTM D 7720 : 2011 : R2017 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination
ASTM D 2422 : 1997 : R2002 Standard Classification of Industrial Fluid Lubricants by Viscosity System
ASTM D 5185 : 2002 : EDT 2 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D 1401 : 2018 : REV A Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 1500 : 2004 : REV A Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 3427 : 2012 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 1500 : 2007 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D 1401 : 2012 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 4057 : 1995 : R2000 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2272 : 2011 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel
ASTM D 3427 : 2014 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 1401 : 2010 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM D 4057 : 2006 : R2011 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D 2273 : 2008 : R2016 Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023)
ASTM D 3427 : 1999 Standard Test Method for Air Release Properties of Petroleum Oils
ASTM D 4898 : 1990 : R2005 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.