• There are no items in your cart

ASTM D 4727/D4727M : 2017 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
Available format(s)

PDF

Superseded date

06-17-2022

Language(s)

English

Published date

06-26-2017

CONTAINED IN VOL. 15.09, 2017 Defines fiberboard primarily used for the fabrication of boxes and interior details such as pads, sleeves, liners, partitions, die-cut sheets, etc.

1.1This specification covers fiberboard primarily used for the fabrication of boxes and interior details such as pads, sleeves, liners, partitions, die-cut sheets, etc.

1.2The performance of fiberboard boxes is largely dependent on the paper components from which they are fabricated and, in the case of corrugated boxes, on the flute structure as well. Therefore, a variety of grades reflecting varied performance levels are specified.

1.3The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. See IEEE/ASTM-SI-10 for conversion of units.

1.4The following safety hazards caveat pertains only to the test portion, Sections 8 and 9, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 10
DevelopmentNote
Supersedes ASTM D 4727. (11/2005)
DocumentType
Redline
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

MIL-PRF-24763 Revision B:2009 ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE
MIL-DTL-44054 Revision C:2011 BOTTLE: OIL SAMPLE; WITH CONTAINER, NONAERONAUTICAL
MIL-DTL-17060 Revision G:2009 MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE
ASTM D 5118/D5118M : 2015 : REDLINE Standard Practice for Fabrication of Fiberboard Shipping Boxes
ASTM D 5330/D5330M : 2006 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM D 5168 : 2012 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
MIL-STD-107 Revision J:2001 PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE
PPP-B-1672 Revision E:2013 BOXES, SHIPPING, REUSABLE WITH CUSHIONING
MIL-STD-147 Revision E:2008 PALLETIZED UNIT LOADS
MIL-DTL-197 Revision M:2016 PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES
MIL-DTL-62220 Revision C:1996 RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF
MIL-DTL-75 Revision K:2007 ELECTRON TUBES, PACKAGING OF
ASTM D 5486/D5486M : 2006 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
MIL-DTL-32438 Base Document:2013 HOT BEVERAGE BOX
MIL-DTL-55425 Revision E:2011 CABLE, TELEPHONE WF-16()/U
FED-STD-802 Base Document:1991 PACKAGING OF SYNTHETIC FIBER FABRICS
MIL-PRF-44073 Revision H:2017 Packaging of Food in Flexible Pouches
ASTM D 5330/D5330M : 2006 : R2012 : EDT 1 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
MIL-HDBK-774 Revision A:2004 PALLETIZED UNIT LOADS
ASTM D 5639/D5639M :2011 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
ASTM D 5168 : 2012 : R2017 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
ASTM D 5330/D5330M : 2006 : R2012 Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
ASTM D 1974 : 1998 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
MIL-STD-1320 Revision D:2014 FOR DESIGNING UNIT LOADS, TRUCKLOADS, RAILCAR LOADS, AND INTERMODAL LOADS FOR AMMUNITION AND EXPLOSIVES
ASTM D 5486/D5486M : 2006 : R2012 Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
ASTM B 660 : 2015 : REDLINE Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
ASTM D 6251/D6251M : 2011 : REDLINE Standard Specification for Wood-Cleated Panelboard Shipping Boxes
ASTM D 6256/D6256M : 2016 : REDLINE Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
ASTM D 5639/D5639M : 2011 : R2015 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

TAPPI T 811 : 2011 EDGEWISE COMPRESSIVE STRENGTH OF CORRUGATED FIBERBOARD (SHORT COLUMN TEST)
ASTM D 3950 : 2017 : REDLINE Standard Specification for Strapping, Nonmetallic (and Joining Methods)
ASTM D 4169 : 2016 : REDLINE Standard Practice for Performance Testing of Shipping Containers and Systems
ASTM D 5118/D5118M : 2015 : REDLINE Standard Practice for Fabrication of Fiberboard Shipping Boxes
TAPPI T 810 : 2011 BURSTING STRENGTH OF CORRUGATED BOARD
ASTM D 3953 : 2015 : REDLINE Standard Specification for Strapping, Flat Steel and Seals
TAPPI T 411 : 2010 THICKNESS (CALIPER) OF PAPER, PAPERBOARD, AND COMBINED BOARD
ASTM D 585 : 1997 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
TAPPI T 441 : 2013 WATER ABSORPTIVENESS OF SIZED (NON-BIBULOUS) PAPER, PAPERBOARD, AND CORRUGATED FIBREBOARD (COBB TEST)
ASTM D 996 : 2016 : REDLINE Standard Terminology of Packaging and Distribution Environments
IEEE/ASTM SI_10-2010 American National Standard for Metric Practice
ASTM E 662 : 2017-02 TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS
TAPPI T 803 : 2010 PUNCTURE TEST OF CONTAINER BOARD
ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
TAPPI T 812 : 2013 PLY SEPARATION OF SOLID AND CORRUGATED FIBERBOARD (WET)
TAPPI/ANSI T 402 sp:2013 STANDARD CONDITIONING AND TESTING ATMOSPHERES FOR PAPER, BOARD, PULP HANDSHEETS, AND RELATED PRODUCTS
TAPPI T 410 : 2013 GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT PER UNIT AREA)
ASTM E 162 : 2016 : REDLINE Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.