• There are no items in your cart

ASTM D 5011 : 2017

Current
Current

The latest, up-to-date edition.

Standard Practices for Calibration of Ozone Monitors Using Transfer Standards
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-01-2017

1.1These practices describe means for calibrating ambient, workplace or indoor ozone monitors, using transfer standards.

1.2These practices describe five types of transfer standards:

Practice A—Analytical instruments,

Practice B—Boric acid potassium iodide (BAKI) manual analytical procedure,

Practice C—Gas phase titration with excess nitric oxide,

Practice D—Gas phase titration with excess ozone, and

Practice E—Ozone generator device.

1.3These practices describe procedures to establish the authority of transfer standards: qualification, certification, and periodic recertification.

1.4The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 8 for specific precautionary statements.

1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 22
DocumentType
Standard Practice
Pages
29
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM D 5110 : 1998 : R2017 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 1356 : 2017 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 5149 : 2002 : R2016 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
ASTM D 5156 : 2002 : R2016 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
ASTM D 7439 : 2014 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

ASTM D 3824 : 1995 : R2000 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM D 1071 : 2017 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D 3195 : 1990 : R2004 Standard Practice for Rotameter Calibration
ASTM D 1071 : 1983 : R2003 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D 5110 : 2022 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM E 591 : 1980 Practice for Safety and Health Requirements Relating to Occupational Exposure to Ozone (Withdrawn 1990)
ASTM D 1356 : 2015 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 3249 : 1995 : R2011 Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 3249 : 1995 : R2000 Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 4230 : 2002 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 5110 : 1998 : R2010 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 5110 : 1998 : R2004 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 3824 : 1995 : R2005 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM D 1356 : 2017 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 3631 : 1999 : R2004 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D 1356 : 2015 : REV B Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 5110 : 2022 : REV A Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 4230 : 2002 : R2007 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 1071 : 1983 : R1998 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 3249 : 1995 : R2005 Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 5110 : 1998 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 4230 : 2002 : R2012 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 1356 : 2014 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 3631 : 1999 : R2007 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D3249 - 95(2019) Standard Practice for General Ambient Air Analyzer Procedures
ASTM D 5110 : 1998 : R2017 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 3631 : 1999 : R2011 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D 4230 : 1983 : R1996 : EDT 1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 1356 : 2015 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 4230 : 2002 : EDT 1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D 1356 : 2005 : R2010 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1356 : 2020 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1356 : 2000 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1356 : 2014 : REV B Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1356 : 2014 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 1356 : 2005 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 3824 : 2012 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 1071 : 1983 : R2008 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples (Withdrawn 2017)
ASTM D 3631 : 1999 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D 3631 : 1999 : R2017 Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D 3195 : 1990 : R1998 : EDT 1 Standard Practice for Rotameter Calibration
ASTM D 1071 : 1983 : R1998 : EDT 1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
ASTM D 4230 : 2020 Standard Test Method for Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer

View more information
US$90.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.