• There are no items in your cart

ASTM D 5035 : 2011 : R2019

Current
Current

The latest, up-to-date edition.

Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

07-01-2019

This test method covers raveled strip and cut strip test procedures for determining the breaking force and elongation of most textile fabrics.

1.1This test method covers raveled strip and cut strip test procedures for determining the breaking force and elongation of most textile fabrics. Provision is made for wet testing.

1.1.1The raveled strip test is applicable to woven fabrics while the cut strip test is applicable to nonwoven fabrics, felted fabrics, and dipped or coated fabrics.

1.2This test method is not recommended for knitted fabrics or for other textile fabrics which have high stretch (more than 11 %).

Note 1:For the determination of the breaking force and elongation of textile fabrics using the grab test and modified grab test procedures, refer to Test Method D5034.

Note 2:For determination of the breaking force and elongation of some specific types of fabrics which use the strip test, refer to Specifications D579 and D580.

1.3This test method shows the values in both inch-pound units and SI units. Inch-pound units is the technically correct name for the customary units used in the United States. SI units is the technically correct name for the system of metric units known as the International System of Units. The values stated in either acceptable metric units or in other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining in any way.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 13
DocumentType
Test Method
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM F 2896 : 2011 : R2017 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM D 6614 : 2007 : R2015 Standard Test Method for Stretch Properties of Textile Fabrics – CRE Method
ASTM D 5970/D5970M : 2016 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
ASTM D 4886 : 2018 Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method)
ASTM D 5726 : 1998 : R2013 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
ASTM D 4594/D4594M : 1996 : R2015 : EDT 1 Standard Test Method for Effects of Temperature on Stability of Geotextiles
ASTM D 5034 : 2009 : R2017 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 5665/D5665M : 1999 : REV A : R2014 : EDT 1 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
ASTM D 3884 : 2009 : R2017 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
ASTM D 4158 : 2008 : R2016 Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
ASTM D 6674 : 2001 : R2017 Standard Guide for Proficiency Test Program for Fabrics
ASTM D 580/D580M : 2015 Standard Specification for Greige Woven Glass Tapes and Webbings
ASTM D 579/D579M : 2015 Standard Specification for Greige Woven Glass Fabrics
ASTM D 6207 : 2003 : R2019 Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
ASTM D 4830/D4830M : 1998 : R2014 : EDT 1 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
ASTM D 6479 : 2015 Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
ASTM D 4355/D4355M : 2014 : R2018 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus
ASTM F 2903 : 2011 Standard Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair (Withdrawn 2020)
ASTM F 2669 : 2012 : R2018 Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides (Withdrawn 2023)
ASTM D 4157 : 2013 : R2017 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
ASTM C 1695 : 2019 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
ASTM D 3107 : 2007 : R2019 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D 4029/D4029M : 2016 Standard Specification for Finished Woven Glass Fabrics
ASTM D 4028/D4028M : 2013 Standard Specification for Solar Screening Woven from Vinyl-Coated Fiber Glass Yarn
ASTM E 2098/E2098M : 2013 : R2018 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
ASTM D 7239 : 2013 : R2018 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
ASTM D 6388 : 2018 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
ASTM G 195 : 2018 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

ASTM D 4849 : 2013 : EDT 3 Standard Terminology Related to Yarns and Fibers
ASTM D 5034 : 2009 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 4850 : 2002 Standard Terminology Relating to Fabric
ASTM D 4848 : 1998 : R2004 : EDT 1 Standard Terminology Related to Force, Deformation and Related Properties of Textiles
ASTM D 4849 : 2020 Standard Terminology Related to Yarns and Fibers
ASTM D 4850 : 2000 Standard Terminology Relating to Fabric
ASTM D 4849 : 2013 : EDT 2 Standard Terminology Related to Yarns and Fibers
ASTM D 4849 : 2002 : REV A Standard Terminology Relating to Yarns and Fibers
ASTM D 1776 : 1998 : EDT 1 Standard Practice for Conditioning and Testing Textiles
ASTM D 4850 : 2002 : REV A Standard Terminology Relating to Fabric
ASTM D 4849 : 2013 : R2018 Standard Terminology Related to Yarns and Fibers
ASTM D 4849 : 2002 : REV B Standard Terminology Relating to Yarns and Fibers
ASTM D 1776 : 1967 : EDT 1 Standard Method Of Conditioning Textiles And Textile Products For Testing
ASTM D 4850 : 2003 : REV A : R2007 Standard Terminology Relating to Fabric
ASTM D 4849 : 2002 : REV B : R2007 : EDT 2 Standard Terminology Related to Yarns and Fibers
ASTM D 4850 : 2008 : EDT 1 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 4850 : 2013 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 5034 : 2009 : R2013 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 4848 : 1998 : R2018 Standard Terminology Related to Force, Deformation and Related Properties of Textiles
ASTM D 5034 : 1995 : R2001 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 4849 : 2002 : REV B : EDT 1 Standard Terminology Relating to Yarns and Fibers
ASTM D 123 : 2019 Standard Terminology Relating to Textiles
ASTM D 4850 : 2012 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 629 : 2015 Standard Test Methods for Quantitative Analysis of Textiles (Withdrawn 2024)
ASTM D 4849 : 2002 : REV B : R2007 : EDT 1 Standard Terminology Related to Yarns and Fibers
ASTM D 1776 : 2004 Standard Practice for Conditioning and Testing Textiles
ASTM D 1776 : 2008 : EDT 1 Standard Practice for Conditioning and Testing Textiles
ASTM D 1776 : 2008 Standard Practice for Conditioning and Testing Textiles
ASTM D 4850 : 2013 : R2017 : EDT 1 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 4848 : 1998 Standard Terminology of Force, Deformation and Related Properties of Textiles
ASTM D 4850 : 2008 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 4850 : 2023 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 4850 : 2003 Standard Terminology Relating to Fabric
ASTM D 5034 : 2008 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 4850 : 2013 : R2017 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 4850 : 2000 : REV A Standard Terminology Relating to Fabric
ASTM D 5034 : 2009 : R2017 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 4849 : 2021 Standard Terminology Related to Yarns and Fibers
ASTM D 5034 : 2021 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 123 : 2023 Standard Terminology Relating to Textiles
ASTM D 4849 : 2002 : REV B : R2007 Standard Terminology Relating to Yarns and Fibers
ASTM D 4850 : 2003 : REV A Standard Terminology Relating to Fabric
ASTM D 123 : 2001 Standard Terminology Relating to Textiles
ASTM D 4849 : 2013 Standard Terminology Related to Yarns and Fibers
ASTM D 4849 : 2002 : REV B : R2007 : EDT 3 Standard Terminology Related to Yarns and Fibers
ASTM D 5034 : 1995 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D 4849 : 2013 : EDT 1 Standard Terminology Related to Yarns and Fibers
ASTM D 4848 : 1998 : R2004 Standard Terminology of Force, Deformation and Related Properties of Textiles
ASTM D 4850 : 2013 : EDT 1 Standard Terminology Relating to Fabrics and Fabric Test Methods
ASTM D 4848 : 1998 : R2012 Standard Terminology Related to Force, Deformation and Related Properties of Textiles

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.