• There are no items in your cart

ASTM D 5336 : 2015 : REV A

Current
Current

The latest, up-to-date edition.

Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Material
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

10-12-2015

1.1This classification system covers polyphthalamide materials suitable for injection molding.

1.2The properties included in this classification system are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5.

1.3This classification system allows for the use of recycled materials provided that all specification requirements are met.

1.4This classification system is intended to be a means of calling out plastics materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastics field only after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this classification system.

1.5The values stated in SI units are to be regarded as the standard (see IEEE/ASTM SI-10). The values given in parentheses are for information only.

1.6The following precautionary caveat pertains only to the test methods portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in 11.7.1.

Note 1:There is no known ISO equivalent to this standard.

Committee
D 20
DocumentType
Standard
Pages
7
PublisherName
American Society for Testing and Materials
Status
Current
SupersededBy
Supersedes

ASTM D 4000 : 2020 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2016 Standard Classification System for Specifying Plastic Materials

ASTM D 5225 : 2009 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D 2857 : 2016 Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D 1600 : 1999 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 5225 : 1998 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D 5225 : 2014 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D 3418 : 2012 : EDT 1 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 2857 : 1995 : R2001 Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D 4000 : 2013 Standard Classification System for Specifying Plastic Materials
ASTM D 3418 : 1982 : R1988 : EDT 1 Standard Test Method for Transition Temperatures of Polymers By Thermal Analysis
ASTM D 3801 : 2006 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 3892 : 2015 : R2020 Standard Practice for Packaging/Packing of Plastics
ASTM D 3418 : 1999 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM D 2857 : 1995 Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D 4000 : 2003 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 3418 : 2021 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2000 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2012 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2009 Standard Classification System for Specifying Plastic Materials
ASTM D 3641 : 2002 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM E 29 : 2002 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D 3892 : 1993 : R2003 Standard Practice for Packaging/Packing of Plastics
ASTM D 3892 : 2015 Standard Practice for Packaging/Packing of Plastics
ASTM D 3801 : 2000 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 4000 : 2011 Standard Classification System for Specifying Plastic Materials
ASTM D 3801 : 2010 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 7209 : 2006 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products (Withdrawn 2015)
ASTM D 3892 : 1993 : R1998 Standard Practice for Packaging/Packing of Plastics
ASTM D 1600 : 2007 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 4000 : 2004 : EDT 1 Standard Classification System for Specifying Plastic Materials
ASTM D 1600 : 2013 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3801 : 2019 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 3641 : 2021 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 3418 : 2012 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 5225 : 2017 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
ASTM D 3641 : 2010 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 1600 : 2014 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3418 : 2003 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 1600 : 2008 Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D 3418 : 2015 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2009 : REV B Standard Classification System for Specifying Plastic Materials
ASTM D 3801 : 2019 : REV A Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 3641 : 2015 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 4000 : 2000 Standard Classification System for Specifying Plastic Materials
ASTM D 3641 : 2010 : REV A Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 4000 : 2010 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 2857 : 1995 : R2007 Standard Practice for Dilute Solution Viscosity of Polymers (Withdrawn 2016)
ASTM D 3641 : 2014 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 2857 : 1970 : R1977 Standard Test Method for Dilute Solution Viscosity Of Polymers
ASTM D 4000 : 2007 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2009 : REV A Standard Classification System for Specifying Plastic Materials
ASTM D 5630 : 2013 Standard Test Method for Ash Content in Plastics (Withdrawn 2022)
ASTM D 4000 : 2001 Standard Classification System for Specifying Plastic Materials
ASTM D 5630 : 1994 Standard Test Method for Ash Content in Thermoplastics
ASTM D 3835 : 1996 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D 4000 : 2008 Standard Classification System for Specifying Plastic Materials
ASTM D 3835 : 2016 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D 6869 : 2017 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D 1600 : 2018 Standard Terminology for Abbreviated Terms Relating to Plastics (Withdrawn 2024)
ASTM D 6869 : 2003 : R2011 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D 618 : 2013 Standard Practice for Conditioning Plastics for Testing
ASTM D 3418 : 2008 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM D 4000 : 2001 : REV A : EDT 1 Standard Classification System for Specifying Plastic Materials
ASTM D 4000 : 2004 Standard Classification System for Specifying Plastic Materials
ASTM D 3801 : 1996 : EDT 1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 3835 : 2008 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D 5630 : 2001 Standard Test Method for Ash Content in Thermoplastics
ASTM D 3835 : 1979 : R1983 Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D 3892 : 1993 : R2009 Standard Practice for Packaging/Packing of Plastics
ASTM D 4000 : 2010 Standard Classification System for Specifying Plastic Materials
ASTM D 3801 : 2020 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM D 5630 : 2006 Standard Test Method for Ash Content in Plastics
ASTM D 3641 : 1997 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 3835 : 2002 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
ASTM D 3641 : 2012 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
ASTM D 4000 : 2003 Standard Classification System for Specifying Plastic Materials
ASTM D 6869 : 2003 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D 618 : 2021 Standard Practice for Conditioning Plastics for Testing

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.