• There are no items in your cart

ASTM D 695 : 2015 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Compressive Properties of Rigid Plastics
Available format(s)

PDF

Superseded date

08-18-2023

Language(s)

English

Published date

09-11-2015

CONTAINED IN VOL. 08.01, 2015 Specifies the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in compression at relatively low uniform rates of straining or loading.

1.1This test method covers the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in compression at relatively low uniform rates of straining or loading. Test specimens of standard shape are employed. This procedure is applicable for a composite modulus up to and including 41,370 MPa (6,000,000 psi).

1.2The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.

Note 1:For compressive properties of resin-matrix composites reinforced with oriented continuous, discontinuous, or cross-ply reinforcements, tests may be made in accordance with Test Method D3410/D3410M or D6641/D6641M.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in 13.1.

Note 2:This standard is equivalent to ISO 604.

Committee
D 20
DevelopmentNote
Supersedes ASTM D 649. (02/2002)
DocumentType
Redline
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

AASHTO T 341 : 2010 METHOD OF TEST FOR DETERMINATION OF COMPRESSION CAPACITY FOR PROFILE WALL PLASTIC PIPE BY STUB COMPRESSION LOADING
ASTM D 6641 : 2001 TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE
MIL-R-83330 Base Document:1971 RESIN, HEAT RESISTANT, LAMINATING
ASTM D 5948 : 2005 : R2012 Standard Specification for Molding Compounds, Thermosetting
CSA S807 : 2010 SPECIFICATION FOR FIBRE-REINFORCED POLYMERS
ASTM D 3262 : 2016 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
ASTM D 3846 : 2008 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
CSA N285.5 : 2013 PERIODIC INSPECTION OF CANDU NUCLEAR POWER PLANT CONTAINMENT COMPONENTS
IEEE 1133-1988 IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications
AASHTO M 235M/M 235 : 2013 SPECIFICATION FOR EPOXY RESIN ADHESIVES
MIL-P-25518 Revision B:1981 Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated
15/30321951 DC : 0 BS ISO 20195 - STANDARD PRACTICE - GUIDE FOR DESIGN FOR ADDITIVE MANUFACTURING
MIL-R-82483 Revision A:1976 RESIN, POLYESTER, SOLUTIONS
SAE AMS 3847 : 1994(S2016) CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F)
04/30091601 DC : 0 ISO 13628-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11 - FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
MIL-M-48245 Revision B:1988 MOLDING COMPOUND, HOUSING
MIL-PRF-46197 Revision A:1997 LAMINATE: HIGH-STRENGTH GLASS, FABRIC-REINFORCED, POLYESTER RESIN PREIMPREGNATED
ACI 503.7 : 2007 SPECIFICATION FOR CRACK REPAIR BY EPOXY INJECTION
ASTM F 1876 : 1998 : R2003 : EDT 1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012)
ASTM D 5948 : 2005 Standard Specification for Molding Compounds, Thermosetting
AWWA M55 : 1 PE PIPE - DESIGN AND INSTALLATION
MIL-P-43043 Revision C:1978 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
ASTM F 1876 : 1998 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
SAE AMS 3644 : 2016 PLASTIC: POLYIMIDE, FOR MOLDED ROD, BAR, AND TUBE, PLAQUE, AND FORMED PARTS
ASTM C 582 : 2009 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ANSI/AWWA D110:2013(R2018) WIRE- AND STRAND-WOUND, CIRCULAR, PRESTRESSED CONCRETE WATER TANKS
SAE J 1568 : 2012 MATERIALS FOR PLASTIC PISTONS FOR HYDRAULIC DISC BRAKE CYLINDERS
ASTM D 5813 : 2004 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D 3410/D3410M : 2016 : REDLINE Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
NACE RP 03 04 : 2004 DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
SAE AMS 3670/1 : 2004 UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES
ASTM D 3914 : 2002 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D 619 : 2014 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D 2991 : 1984 Recommended Practice for Testing Stress-Relaxation of Plastics (Withdrawn 1990)
ASTM F 2433 : 2005 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM D 5592 : 1994 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM D 1039 : 2016 : REDLINE Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
AWWA M45 : 3 FIBERGLASS PIPE DESIGN
MIL-M-24519 Revision E:1992 MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC
MIL-P-46179 Revision A:1986 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE
MIL-M-14 Revision H:1990 MOLDING COMPOUNDS, THERMOSETTING
MIL-DTL-20517 Revision J:2011 Simulator, Projectile, Air Burst, M74A1 Parts for and Loading, Assembling and Packing
ASTM D 6641 : 2001 TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE
ASTM F 595 : 2001 Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic Hose)
API SPEC 11D1 : 2015 PACKERS AND BRIDGE PLUGS
WW-L-2887 Base Document:1998 TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS
SAE AMS 3733 : 2015 POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH
MIL-M-19417 Revision D:1992 Mask Assemblies, Oxygen and Smoke, Full Face
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
ASTM D 2990 : 2017 : REDLINE Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
SAE AMS 3670 : 2003 POLYAMIDE-IMIDE BAR, ROD, & SHAPES, MOLDED OR EXTRUDED
MIL-P-63061 Revision A:1978 PROJECTILE, 155MM, M692/M731 PLUG, HOUSING FOR
SAE AMS 3831 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH
CSA S807 : 2010 : R2015 SPECIFICATION FOR FIBRE-REINFORCED POLYMERS
SAE AMS 3826 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER RESIN IMPREGNATED, 1581 AND 7781 TYPE FABRIC
DOD-STD-35-24 Revision A:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, BEARINGS
ASTM C 881 : 1999 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
AASHTO LRFDLTS 1 : 1900 LRFD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS
ASTM D 4617 : 2003 Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012)
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
MIL-M-70765 Base Document:1988 MINE ANTI PERSONNEL, M86, SPECIAL TEST MINE LOADING AND ASSEMBLY OF
MIL S 24154 : A SYNTACTIC BUOYANCY MATERIAL FOR HIGH HYDROSTATIC PRESSURES
FM 1614 : 2017 FIBER REINFORCED COMPOSITE (FRC) PIPE AND FITTINGS FOR UNDERGROUND FIRE PROTECTION SERVICE
ASTM D 5467/D5467M : 1997 : R2010 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
ASTM F 635 : 1985 : R1991 Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
API 17B REDLINE : 2008 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
MIL-DTL-64154 Revision B:2008 LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC
MIL-P-82650 Base Document:1976 PLASTIC MOLDING MATERIAL, GLASS PHENOLIC
ASTM D 8066/D8066M : 2017 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
ASTM D 6641 : 2001e1 TEST METHOD FOR DETERMINING THE COMPRESSIVE PROPERTIES OF POLYMER MATRIX COMPOSITE LAMINATES USING A COMBINED LOADING COMPRESSION (CLC) TEST FIXTURE
ISO 19213:2017 Implants for surgery — Test methods of material for use as a cortical bone model
ASTM D 3914 : 2002 : R2008 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D 3754 : 2014 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ACI 548.5R : 2016 GUIDE FOR POLYMER CONCRETE OVERLAYS
AASHTO MP 35 : 2018 SPECIFICATION FOR THIN OVERLAY TREATMENTS USING A BINDER RESIN SYSTEM AND AGGREGATE FOR CONCRETE SURFACES
SAE AMS 3812 : 2016 RODS, GLASS FIBER, POLYESTER RESIN, LOADED PULTRUSION
SAE AMS 3619 : 2016 RESIN, POLYIMIDE, LAMINATING, HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F)
ASTM F 790 : 2008 : R2013 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM F 2150 : 2013 : REDLINE Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
ASTM F 1429 : 1999 : R2005 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
ASTM F 2433 : 2005 : R2009 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
ASTM F 2026 : 2017 : REDLINE Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM F 2565 : 2013 : REDLINE Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
ASTM F 2977 : 2013 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
ASTM F 2433 : 2005 : R2013 Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
ASTM F 561 : 2013 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
API SPEC 19OH : 2018 OPENHOLE ISOLATION EQUIPMENT
DOD PRF 24176 : B CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC)
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
AWWA D121 : 2014 BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE
SAE AMS 3906 : 2016 GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
04/301931 DC : DRAFT JAN 2004 ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ASTM F 639 : 2009 : R2015 Standard Specification for Polyethylene Plastics for Medical Applications
MIL-A-47073 Base Document:1974 ADHESIVE, PLASTIC RESIN
SAE AMS 3811 : 2016 Rods, Aramid Fiber, Polyester Resin Coated Pultrusion
ASTM F 1309 : 1998 : R2003 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
MIL-PRF-46190 Revision A:1997 PREPEGS, WOVEN FABRIC, CARBON FIBER, RESIN IMPREGNATED
ASTM F 790 : 2008 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM D 5813 : 2004 : R2008 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM F 1579 : 2002 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
ASTM PS 93 : 1998 Provisional Standard Specification for Fabricated Shapes and Finished Parts Fabricated From Polyimide Resins (Withdrawn 2001)
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
SAE J 1345 : 1995 AUTOMOTIVE PLASTIC PARTS SPECIFICATION
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
SAE AMS 3834 : 2016 CLOTH, TYPE 'E' GLASS, 'B' STAGE POLYESTER-RESIN-IMPREGNATED, 7781 STYLE FABRIC, FLAME RESISTANT, IMPROVED STRENGTH
SAE AMS 3844 : 2016 Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
ACI 548.10 : 2010 SPECIFICATION FOR TYPE MMS (METHYL METHACRYLATE SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS
ACI 503.5R : 1992 GUIDE FOR POLYMER ADHESIVES WITH CONCRETE THE SELECTION OF POLYMER ADHESIVES WITH CONCRETE
ACI SPEC-548.10 : 2010 SPECIFICATION FOR TYPE MMS (METHYL METHACRYLATE SLURRY) POLYMER OVERLAYS FOR BRIDGE AND PARKING GARAGE DECKS
I.S. EN ISO 13628-11:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ASTM D 695M : 1991 Test Method for Compressive Properties of Rigid Plastics (Metric) (Withdrawn 1996)
CSA B1800 SERIES : 2015 THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM
ASTM F 451 : 2016 Standard Specification for Acrylic Bone Cement
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
ASTM D 3517 : 2014 : REDLINE Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM C 1424 : 2015 : REDLINE TEST METHOD FOR MONOTONIC COMPRESSIVE STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE
ASTM F 1429 : 1999 : R2014 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
ASTM F 2883 : 2011 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications (Withdrawn 2020)
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
I.S. EN ISO 14126:2000 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
UNI EN ISO 13628-11 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
CSA B182.7 : 2006 PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT
ASTM D 3753 : 2012-04 SPECIFICATION FOR GLASS-FIBER-REINFORCED POLYESTER MANHOLES AND WETWELLS
SAE AMS 3732 : 2015 POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE
SAE AMS 3821 : 2015 CLOTH, TYPE 'E' GLASS, 'B' STAGE EPOXY-RESIN-IMPREGNATED 7781 STYLE FABRIC, FLAME RESISTANT
ANSI/AWWA C950:2013 FIBERGLASS PRESSURE PIPE
SAE AMS 3903 : 2013 CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS, EPOXY RESIN IMPREGNATED
MIL-PRF-24176 Revision C:2004 CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC)
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
MIL-T-70638 Base Document:1992 TEST PROJECTILE, 155 MM, NON-HE, FOR M692/M731 TEST MINES LOADING, ASSEMBLING & PACKING OF
ASTM F 1429 : 1999 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
ASTM F 1429 : 1999 : R2009 Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
MIL-F-48375 Base Document:1978 FIRING TRAIN TEST HOUSING, OPERATOR CONTROLLED
SAE AMS 3670/3 : 2004 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES, 12% GRAPHITE - 3% POLYTETRAFLUOROETHYLENE FILLED
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
MIL-C-24449 Revision A:1981 CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS AND FINISHED WINDOWS
ASTM D 5467/D5467M : 1997 : R2004 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D 4098 : 1982 : R1987 : EDT 1 Practice for Evaluating High-Density Rigid Cellular Thermosets (Withdrawn 1994)
ASTM D 7745 : 2011 Standard Practice for Testing Pultruded Composites
MIL-M-46862 Revision B:1992 MOLDING MATERIAL, GLASS, EPOXY IMPREGNATED
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
MIL-PRF-62419 Revision B:2010 COMPOSITE MATERIALS FOR MILITARY VEHICLES
13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
ASTM PS 2 : 1994 Specification for Molding Plastics, Electrical, Thermoplastic (Withdrawn 1997)
MIL-PRF-46187 Revision A:1998 PREPREG, UNIDIRECTIONAL TAPE, CARBON (GRAPHITE) FIBER HIGH TEMPERATURE RESIN IMPREGNATED, 316 DEGREES C (600 DEGREES F)
MIL-A-47280 Base Document:1974 ADHESIVES, EPOXY
ASTM F 2820 : 2012 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM F 1635 : 2016 : REDLINE Standard Test Method for <emph type="bdit">in vitro</emph> Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
MIL-P-48189 Revision D:1992 PROJECTILE, 155MM, HE, M692 AND M731 HOUSING, TIMING AND FUZING FOR
BS ISO 19213:2017 Implants for surgery. Test methods of material for use as a cortical bone model
API 17U : 2015 RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
SAE AMS 3849 : 2016 CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ASTM F 2183 : 2002 Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
ASTM F 1309 : 1998 : R2012 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
ASTM F 711 : 2017 : REDLINE Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
SAE AMS 3827 : 2016 Cloth, Type "E” Glass, “B” Stage Polyester-Resin-Impregnated 7781 Style Fabric, Flame Resistant
ASTM C 582 : 2009 : R2016 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
ASTM F 450 : 2013 : REDLINE Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
ASTM F 1579 : 2002 : EDT 1 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011)
ASTM D 5592 : 1994 : R2010 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM F 1309 : 1998 : R2007 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
ISO 14126:1999 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
EN ISO 14126:1999/AC:2002 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
ASTM F 636 : 1985 : R1991 Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
MIL-S-81256 Base Document:1965 SILICA FABRIC, PHENOLIC IMPREGNATED
MIL-R-46198 Base Document:1988 RESIN, POLYIMIDE, HOT PRESSED OR PRESSED AND SINTERED
MIL-M-24325 Base Document:1968 MOLDING MATERIAL PLASTIC, EPOXY COMPOUNDS THERMOSETTING
MIL-B-82789 Base Document:1990 BROADGOODS, SILICA CLOTH, PHENOLIC IMPREGNATED
MMM-A-1754 Base Document:1973 ADHESIVE AND SEALING COMPOUND EPOXY METAL FILLED
MIL L 46197 : (1) LAMINATE: HIGH STRENGTH GLASS, FABRIC REINFORCED, POLYESTER RESIN PREIMPREGNATED
MIL-P-17549 Revision D:1981 PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL
MIL-B-82792 Base Document:1990 BROADGOODS, CARBON CLOTH, PHENOLIC IMPREGNATED
15/30302738 DC : 0 BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL
SAE AMS 3731 : 2016 POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE
ACI 440R : 2007 REPORT ON FIBER-REINFORCED POLYMER (FRP) REINFORCEMENT FOR CONCRETE STRUCTURES
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-B-82800 Base Document:1983 BROADGOODS, GRAPHITE CLOTH, PHENOLIC IMPREGNATED
MIL T 82840 : NOTICE 1 TAPE, SILICAL CLOTH, PHENOLIC - PREIMPREGNATED
ASTM F 3087 : 2015 Standard Specification for Acrylic Molding Resins for Medical Implant Applications
BS ISO 13628-11:2007 Petroleum and natural gas industries. Design and operation of subsea production systems Flexible pipe systems for subsea and marine applications
MIL T 82839 : NOTICE 1 TAPE, CARBON CLOTH, PHENOLIC PREIMPREGNATED
B184 SERIES-17 Polymeric subsurface stormwater management structures
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ASTM D 3914 : 2002 : R2016 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
ASTM F 1092 : 2014 : REDLINE Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
ASTM F 2953 : 2012 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
ASTM F 2183 : 2002 : R2008 Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants (Withdrawn 2017)
ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
ASTM D 5813 : 2004 : R2012 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D 5948 : 2005 : EDT 1 Standard Specification for Molding Compounds, Thermosetting
ASTM F 3131 : 2014 Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
ASTM D 3846 : 2008 : R2015 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics (Withdrawn 2024)
ASTM C 1292 : 2016 : REDLINE Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM F 639 : 2009 Standard Specification for Polyethylene Plastics for Medical Applications
ASTM D 5592 : 1994 : R2002 : EDT 1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ASTM F 1309 : 1998 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
ASTM F 595 : 2001 : R2005 Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (All-Plastic Hose)
ASTM D 7791 : 2017 : REDLINE Standard Test Method for Uniaxial Fatigue Properties of Plastics
EN ISO 13628-11:2008/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
ISO 13628-11:2007 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications
ASME PVHO 2 : 2016 SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY: IN-SERVICE GUIDELINES
ASME PVHO 1 : 2016 SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY

ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
ASTM E 83 : 2016 : REDLINE Standard Practice for Verification and Classification of Extensometer Systems
ASTM D 3410/D3410M : 2016 : REDLINE Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ISO 604:2002 Plastics — Determination of compressive properties
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.