ASTM D 7106/D7106M : 2005 : R2015 : EDT 1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
Available format(s)
Hardcopy , PDF
Superseded date
10-17-2023
Language(s)
English
Published date
06-12-2015
CONTAINED IN VOL. 04.13, 2017 Describes the recommendations for the selection of appropriate test methods for Ethylene Propylene Diene Terpolymer (EPDM) geomembranes used in geotechnical and geoenvironmental applications.
1.1This guide covers and provides recommendations for the selection of appropriate test methods for Ethylene Propylene Diene Terpolymer (EPDM) geomembranes used in geotechnical and geoenvironmental applications.
1.2This guide includes test methods for three different types of EPDM geomembranes including; scrim-reinforced membranes, composite membranes and smooth, non-reinforced membranes.
1.3The test methods are divided into three categories including manufacturing quality control, optional performance tests and seam testing.
1.4The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.5This standard does not purport to address all of the safety problems, if any associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 35
|
| DevelopmentNote |
Supersedes ASTM D 7106. (06/2015)
|
| DocumentType |
Guide
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
| ASTM E 96/E96M : 2016 : REDLINE | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 2137 : 2011 : R2018 | Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1004 : 2008 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 5747/D5747M : 2021 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 1149 : 2016 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 2137 : 1994 : R2000 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 4833/D4833M : 2007 : R2013 : EDT 1 | Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products |
| ASTM D 4637/D4637M : 2015 : R2021 | Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane |
| ASTM D 5884/D5884M : 2004 : REV A : R2015 : EDT 1 | Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes |
| ASTM D 1418 : 2010 : REV A : R2016 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 1204 : 2014 : REDLINE | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 1204 : 2007 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 4637/D4637M : 2015 | Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane |
| ASTM D 1434 : 1982 : R2003 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 1004 : 1994 : REV A | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
| ASTM D 4437 : 1999 | Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM E 96/E96M : 2022 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 5199 : 2012 : R2019 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 1004 : 2009 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 5721 : 2008 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 1204 : 2014 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 5617 : 2004 : R2010 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM E 96/E96M : 2021 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 1004 : 2013 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 1418 : 1999 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 5747/D5747M : 2008 : R2013 : EDT 1 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| ASTM D 5721 : 2008 : R2013 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 1004 : 1994 : REV A : R2003 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 5321/D5321M : 2017 : REDLINE | TEST METHOD FOR DETERMINING THE SHEAR STRENGTH OF SOIL-GEOSYNTHETIC AND GEOSYNTHETIC-GEOSYNTHETIC INTERFACES BY DIRECT SHEAR |
| ASTM D 1149 : 2015 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 1004 : 2013 : REDLINE | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 1204 : 2008 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 5747/D5747M : 2020 | Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids |
| ASTM D 5199 : 2001 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 1418 : 2006 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 413 : 1998 | Standard Test Methods for Rubber Property-Adhesion to Flexible Substrate |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 5321/D5321M : 2020 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 1004 : 2003 | Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting |
| ASTM D 1418 : 2010 : REV A | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 1149 : 2007 | Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment |
| ASTM D 4637/D4637M : 2015 : REDLINE | Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane |
| ASTM D 1204 : 2014 : R2020 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 7004/D7004M : 2003 : R2021 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1004 : 2007 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM D 4437 : 2008 : R2013 | Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 1418 : 2017 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 5721 : 1995 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 2137 : 2010 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1418 : 2021 : REV A | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 4355/D4355M : 2021 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus |
| ASTM E 96/E96M : 2016 | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 1149 : 2018 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 2137 : 2005 | Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 5321/D5321M : 2021 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear |
| ASTM D 7004/D7004M : 2003 : R2013 : EDT 1 | Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes |
| ASTM D 2240 : 2015 : R2021 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1418 : 2001 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 1434 : 1982 : R2015 : EDT 1 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 618 : 2013 | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1149 : 2007 : R2012 | Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 4439 : 2023 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 5721 : 2008 : R2018 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 5199 : 2012 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 1149 : 1978 : REV A | Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen) |
| ASTM D 1418 : 2010 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1204 : 1994 : EDT 1 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4439 : 2023 : REV B | Standard Terminology for Geosynthetics |
| ASTM D 1434 : 1982 : R2009 : EDT 1 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 5199 : 2011 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 4355/D4355M : 2014 : R2018 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus |
| ASTM D 1418 : 2001 : REV A | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 1418 : 2005 | Standard Practice for Rubber and Rubber Latices-Nomenclature |
| ASTM D 5721 : 2022 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 5617 : 2004 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 297 : 2015 : R2019 | Standard Test Methods for Rubber Products—Chemical Analysis |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1418 : 2022 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 4439 : 2017-08 | TERMINOLOGY FOR GEOSYNTHETICS |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1434 : 2023 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 5199 : 2001 : R2006 | Standard Test Method for Measuring the Nominal Thickness of Geosynthetics |
| ASTM D 1204 : 2002 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 297 : 2021 | Standard Test Methods for Rubber Products—Chemical Analysis |
| ASTM D 4437 : 2008 | Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 5617 : 2004 : R2015 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 1004 : 2021 | Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting |
| ASTM D 618 : 2021 | Standard Practice for Conditioning Plastics for Testing |
| ASTM D 1434 : 1982 : R1998 | Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting |
| ASTM D 5617 : 1999 : EDT 1 | Standard Test Method for Multi-Axial Tension Test for Geosynthetics |
| ASTM D 4437 : 1994 : R1988 | Standard Practice for Determining the Integrity of Field Seams Used in Joining Flexible Polymeric Sheet Geomembranes |
| ASTM D 1149 : 1999 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber |
| ASTM D 4439 : 2023 | Standard Terminology for Geosynthetics |
| ASTM D 4637/D4637M : 2015 : R2021 : EDT 1 | Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane |
| ASTM D 1418 : 2017 : REDLINE | Standard Practice for Rubber and Rubber Latices—Nomenclature |
| ASTM D 2137 : 2011 | Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics |
| ASTM D 1418 : 2021 | Standard Practice for Rubber and Rubber Latices—Nomenclature |
US$66.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.