• There are no items in your cart

ASTM D 746 : 2014 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
Available format(s)

PDF

Superseded date

08-06-2020

Language(s)

English

Published date

12-01-2014

CONTAINED IN VOL. 08.01, 2017 Defines the determination of the temperature at which plastics and elastomers (as defined by Terminology D 883) exhibit brittle failure under Specified impact conditions.

1.1This test method covers the determination of the temperature at which plastics and elastomers (as defined by Terminology D883) exhibit brittle failure under specified impact conditions. Two routine inspection and acceptance procedures are also provided.

Note 1:When testing rubbers for impact brittleness use Test Method D2137. When testing plastic sheeting for impact brittleness, use Test Method D1790.

1.2The values stated in SI units are to be regarded as the standard.

1.3Due to the potential safety and environmental hazards associated with mercury-filled thermometers, the use of alternative temperature measuring devices (such as thermocouples and RTDs) is encouraged.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 2:This test method and ISO 974 address the same subject matter, but differ in technical content.

Committee
D 20
DocumentType
Redline
Pages
9
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

SAE AMS L P 390 : 2000 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY)
CSA C22.2 No. 179 : 2009 : INC : UPD 1 : 2015 : R201400 AIRPORT SERIES LIGHTING CABLES
CSA C22.2 No. 131 : 2014 TYPE TECK 90 CABLE
MIL A 23940 : 0
CSA C68.10 : 2014 SHIELDED POWER CABLE FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS, 5-46 KV
MIL-A-46146 Revision B:1990 ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT)
GR 1398 CORE : ISSUE 1 REV 1 GENERIC REQUIREMENTS FOR COAXIAL DROP CABLE
BS ISO 4925:2005 Road vehicles. Specification of non-petroleum-base brake fluids for hydraulic systems
ASTM C 864 : 2005 : R2011 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
MIL-A-46106 Revision B:1989 ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT
MIL-DTL-28689 Revision C:1997 CONTAINERS, SHIPPING AND STORAGE, STEEL WALL (WITH AND WITHOUT CABINETRY)
MIL-PRF-46846 Revision D:2013 Rubber, Synthetic, Heat - Shrinkable
IEEE 1133-1988 IEEE Application Guide for Evaluating Nonceramic Materials for High-Voltage Outdoor Applications
SAE AIR 1387 : 2016 DESIGNING WITH ELASTOMERS FOR USE AT LOW TEMPERATURES, NEAR OR BELOW GLASS TRANSITION
MIL T 14398 : J TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED
CSA Z245.20-Z245.21 : 2006 EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE
MIL-B-41816 Revision H:1990 BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD)
ASTM C 1644 : 2006 : R2011 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
MIL-H-53096 Base Document:1990 HOSES & HOSE ASSEMBLIES, ELASTOMER, RUBBER, LIQUID FUEL, NON-COLLAPSIBLE, LOW TEMPERATURE
ASTM E 1783 : 1996 : R2000 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
BS ISO 13628-10 : 2005 AMD 16775 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
CSA C68.5 : 2013 SHIELDED AND CONCENTRIC NEUTRAL POWER CABLE FOR DISTRIBUTION UTILITIES
MIL-P-51406 Revision A:1984 PLASTIC SHEETS, VINYL CHLORIDE POLYMER AND COPOLYMER, FLEXIBLE
AASHTO M 251 : 2006 SPECIFICATION FOR PLAIN AND LAMINATED ELASTOMERIC BRIDGE BEARINGS
SCTE 15 : 2016 SPECIFICATION FOR TRUNK, FEEDER AND DISTRIBUTION COAXIAL CABLE
MIL PRF 7726 : K RETREAD TIRES, RIBBED TREAD, PNEUMATIC AIRCRAFT
IEEE 1242-1999 IEEE Guide for Specifying and Selecting Power, Control, and Special-Purpose Cable for Petroleum and Chemical Plants
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASTM A 975 : 2011 : R2016 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM A 974 : 1997 : R2016 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
ASTM C 1644 : 2006 : R2017 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM C 509 : 2006 : R2011 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
NACE RP 03 04 : 2004 DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
ASTM D 5212 : 2003 Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)
ASTM D 2952 : 1995 Specification for Ethylene Plastics (Withdrawn 1999)
ASTM D 3847 : 2001 : R2012 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
SAE AMS 3193F : 2014(S2019) SILICONE RUBBER SPONGE CLOSED CELL, MEDIUM, EXTREME LOW TEMPERATURE
ASTM D 3435 : 1980 Specification for Plastic Containers (Jerry Cans) for Petroleum Products (Withdrawn 1987)
ASTM D 3847 : 2001 : R2018 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
ASTM D 3847 : 2001 Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures
ASTM E 1612 : 1994 : R2000 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM A 974 : 1997 : R2011 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
ASTM E 1612 : 1994 : R2005 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 3105 : 2017 : REDLINE Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
NFPA 262 : 2015 METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
MIL-T-53101 Base Document:1990 TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE
MIL I 23053 : D INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED
ASTM E 1783 : 1996 : R2005 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
I.S. EN ISO 12086-2:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
MIL R 46846 : B RUBBER, SYNTHETIC, HEAT-SHRINKABLE
ISO 4925:2005 Road vehicles Specification of non-petroleum-base brake fluids for hydraulic systems
MIL-S-12100 Base Document:1952 SHOCK MOUNT M-447. M-448, M-449 AND BRACKET FT-512
04/301931 DC : DRAFT JAN 2004 ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
NF EN ISO 23936-1 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-P-14591 Revision D:1976 PLASTIC FILM, NONRIGID, TRANSPARENT
ASTM C 509 : 2006 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
MIL M 12863 : 0 MOUNT, VIBRATION (VIBRATION MOUNTS MT-1177/U, MT-1178/U, MT-1179/U
MIL-B-50432 Base Document:1969 BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
MIL W 83420 : E WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL
ASTM D 864 : 1952 : R1978 Method of Test for Coefficient of Cubical Thermal Expansion of Plastics
GR 2949 CORE : ISSUE 1 GENERIC REQUIREMENTS FOR BURIED HYBRID COAXIAL/TWISTED PAIR CABLE
C22.2 NO. 96.2-18 Flexible power cables for wind turbine applications rated up to 35 kV
CSA C22.2 No. 179 : 2009 AIRPORT SERIES LIGHTING CABLES
CSA C22.2 No. 179 : 2 AIRPORT SERIES LIGHTING CABLES
S6-14 Canadian Highway Bridge Design Code
ASTM E 1612/E1612M : 1994 : R2017 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM C 509 : 2006 : R2015 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing<brk/> Material
ASTM D 3350 : 2014 : REDLINE Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 6455 : 2011 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
ASTM D 6134 : 2007 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
ASTM D 350 : 2013 : REDLINE Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
ASTM F 2510/F2510M : 2017 : REDLINE Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes
ASTM D 5721 : 2008 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
ASTM C 864 : 2005 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
SAE AS 23053 : 2016 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
WC 3-1992 RUBBER-INSULATED WIRE AND CABLE FOR THE TRANSMISSION AND DISTRIBUTION OF ELECTRICAL ENERGY
CSA C83 : 2017 COMMUNICATION AND POWER LINE HARDWARE
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ASTM D 5926 : 2015 : REDLINE Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM D 2287 : 2012 : REDLINE Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
A-A-59520 Base Document:1999 OVERSHOES, MEN'S AND WOMEN'S, BOOT, COMBAT
ASTM C 542 : 2005 : R2011 Standard Specification for Lock-Strip Gaskets
SAE AMS 3196 : 2017 SPONGE, SILICONE RUBBER CLOSED CELL, FIRM
UNE 53120:2016 Plastics -- Determination of the brittleness temperature by impact
MIL-B-50873 Revision A:1971 BAG, BARRIER, ELASTOMERIC
A-A-55697 Revision B:2012 Tube, Nonmetallic; Polyvinyl Chloride (PVC) Flexible (for Laboratory and Medical Use)
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-PRF-11588 Revision H:2009 HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE, STANDARD AND LOW TEMPERATURE
FM 6082 : 1988 SAFETY BUNGS
MIL-P-20689 Revision D:1988 PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
A-A-59528 Base Document:1999 SHOE, MOLDERS
03/106442 DC : DRAFT APR 2003 ISO 4925 - ROAD VEHICLES - SPECIFICATION FOR NON-PETROLEUM BASE FLUIDS FOR HYDRAULIC SYSTEMS
MIL F 14788 : NOTICE 1 FABRICATED PART, SILICONE RUBBER (FOR USE IN AMMUNITION)
MIL-PRF-23586 Revision F:1996 SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL
UU B 001254 : NOTICE 1 BINDER, LOOSE-LEAF, RING. ONE-PIECE COVER
ASTM F 790 : 2008 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM A 974 : 1997 : R2003 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
ASTM D 2671 : 2013 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
MIL-I-22076 Revision B:1963 INSULATION TUBING, ELECTRICAL, NONRIGID, VINYL, VERY LOW TEMPERATURE GRADE
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
ASTM E 2203 : 2014 : R2018 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
API SPEC 17K : 2017 SPECIFICATION FOR BONDED FLEXIBLE PIPE
ACI 350M : 2006 METRIC CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
ACI 350 : 2006 CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES AND COMMENTARY
CSA C68.3 : 1997
ASTM D 876 : 2013 : REDLINE Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
CSA B1800 SERIES : 2015 THERMOPLASTIC NON-PRESSURE PIPING COMPENDIUM
ASTM D 5721 : 2008 : R2013 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
ASTM E 1783 : 1996 : R2009 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
BS EN ISO 12086-2:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
CSA B182.7 : 2006 PSM TYPE MULTILAYER POLYVINYLCHLORIDE (PVC) SEWER PIPE HAVING REPROCESSED-RECYCLED CONTENT
UNI EN ISO 12086-2 : 2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
SAE AMS R 83285 : 2011 RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE
MIL-DTL-3533 Revision C:2009 RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED
MIL PRF 5041 : K TIRES, RIBBED TREAD, PNEUMATIC, AIRCRAFT
MIL-I-7444 Revision D:1984 INSULATION SLEEVING, ELECTRICAL FLEXIBLE
MIL-T-13020 Revision C:1971 TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U).
MIL-PRF-82791 Base Document:1990 RUBBER, SILICONE, RTV
MIL-P-51431 Revision A:1988 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE BUTENE 1 COPOLYMER, HIGH DENSITY
CSA C22.2 No. 179 : 2009 : R2014 AIRPORT SERIES LIGHTING CABLES
MIL-P-63196 Revision A:1980 POLYURETHANE ELASTOMER BINDER (FOR USE IN AMMUNITION)
MIL R 3533 : B RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED
MIL-M-87176 Base Document:1982 MOLDING MATERIAL, POLYPROPYLENE, MODIFIED MECHANICAL USE ONLY
L-P-390 Revision C:1971 PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY)
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
MIL-PRF-370 Revision K:2017 HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL
MIL-I-3190 Revision F:1991 INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR
MIL-DTL-23053 Revision E:1996 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
MIL-S-81732 Base Document:1969 SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED
SAE AS 50141 : 2012 TUBE, PNEUMATIC TIRE, AIRCRAFT
ASTM D 1764 : 1997 Standard Specification for Rubber Latex Products for Automotive Applications (Withdrawn 2003)
SAE AMS3195 : 2014 SILICONE RUBBER SPONGE CLOSED CELL, MEDIUM
BS ISO 12086-2 : 2001 AMD 10637 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
CAN/CSA-B138.1-17/CAN/CSA-B138.2-17 Portable oil-burning equipment - Packaged equipment requirements / Installation requirements
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
ASTM D 5593 : 1999 : EDT 1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)
ASTM D 6134 : 2007 : R2013 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
ASTM D 6455 : 2011 : R2018 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
ASTM E 1783/E1783M : 1996 : R2017 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
CSA 6.26 : 2018 FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
EN ISO 12086-2:2006/AC:2009 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
SAE J 2028 : 2016 FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
MIL-B-21408 Revision G:1984 BOOTS, SAFETY
MIL-B-83277 Revision A:1975 BOOTS, FLYERS FWU-8/P
MIL S 23586 : E SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED
MIL-C-10369 Revision D:1958 CABLE, TELEPHONE, FIELD, FOR RAPID PAYOUT (MX-306 A/G)
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
MIL R 82791 : 0 RUBBER, SILICONE, RTV
DOD-STD-35-121 Base Document:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, EYELETS, FERRULES, AND GROMMETS
ASTM E 1612 : 1994 : R2009 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM A 975 : 2011 Standard Specification for Double<span class='unicode'>–</span>Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
MIL-A-47040 Base Document:1974 ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE
MIL-F-50022 Base Document:1959 FACEBLANK (FOR CD V-805 MASK)
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
SAE AMS 3194 E : 2014 Silicone Rubber Sponge, Closed Cell, Firm, Extreme Low Temperature(STABILIZED Jun 2019)
MIL-DTL-83420 Revision P:2017 WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
L-T-790 Revision B:1976 TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE)
04/30091870 DC : DRAFT FEB 2004 BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
SAE AMS DTL 23053 : 1999 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ISO/TS 18226:2006 Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)
ASTM F 790 : 2008 : R2013 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM C 542 : 2005 Standard Specification for Lock-Strip Gaskets
CSA C22.2 No. 96.1 : 2016 MINE POWER FEEDER CABLES
ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM C 542 : 2005 : R2017 Standard Specification for Lock-Strip Gaskets
ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
ASTM C 1644 : 2006 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM A 974 : 1997 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
ASTM A 1107/A1107M : 2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
ANSI LC 1 : 2018 FUEL GAS PIPING SYSTEMS USING CORRUGATED STAINLESS STEEL TUBING
ASTM D 3847 : 2001 : R2007 Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures
ASTM C 864 : 2005 : R2015 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
IEEE 789-2013 IEEE Standard Performance Requirements for Communications and Control Cables for Application in High-Voltage Environments
BS 8081:1989 Code of practice for ground anchorages
DIN EN ISO 12086-2:2006-05 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES

ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
ISO 974:2000 Plastics Determination of the brittleness temperature by impact
ASTM E 608/E608M : 2013 : REDLINE SPECIFICATION FOR MINERAL-INSULATED, METAL-SHEATHED BASE METAL THERMOCOUPLES
ASTM D 1790 : 2014 : REDLINE Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
ASTM D 832 : 2007 : R2018 Standard Practice for Rubber Conditioning For Low Temperature Testing

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.