ASTM D 75 : 2003
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Sampling Aggregates
Available format(s)
Hardcopy , PDF
Superseded date
07-11-2023
Language(s)
English
Published date
07-10-2003
CONTAINED IN VOL. 04.03, 2009 Describes sampling of coarse and fine aggregates for preliminary investigation of potential source of supply, control of product at source, control of operations at site and acceptance or rejection of materials. Outlines sampling of fine and coarse aggregates.
1.1 This practice covers sampling of coarse and fine aggregates for the following purposes:
1.1.1 Preliminary investigation of the potential source of supply,
1.1.2 Control of the product at the source of supply,
1.1.3 Control of the operations at the site of use, and
1.1.4 Acceptance or rejection of the materials.
Note 1— Sampling plans and acceptance and control tests vary with the type of construction in which the material is used. Attention is directed to Practices E 105 and D 3665.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Committee |
D 04
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 3744 : 2003 | Standard Test Method for Aggregate Durability Index |
| ASTM D 1139 : 2000 : R2004 | Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
| ASTM F 555 : 2001 : R2006 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM C 40 : 2004 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
| ASTM F 1601 : 2001 : R2006 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM D 5821 : 2013 : R2017 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 1139/D1139M : 2015 : REDLINE | Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
| ASTM C 136/C136M : 2014 : REDLINE | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| NSF 240:2017 | DRAINFIELD TRENCH PRODUCT SIZING FOR GRAVITY DISPERSAL ONSITE WASTEWATER TREATMENT AND DISPERSAL SYSTEMS |
| ASTM C 1646/C1646M : 2016 : REDLINE | Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete |
| ASTM E 889 : 1982 : R2004 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM C 1252 : 2017 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
| ASTM D 1074 : 2017 : REDLINE | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM C 404 : 2011 : R2017 | Standard Specification for Aggregates for Masonry Grout |
| ASTM D 4125/D4125M : 2010 : R2016 | Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
| ASTM D 6704 : 2008 : R2015 | Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM F 1284 : 2009 : R2016 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 1293 : 2008 : REV B : R2015 | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM D 1073 : 2016 : REDLINE | Standard Specification for Fine Aggregate for Asphalt Paving Mixtures |
| ASTM D 1140 : 2017 : REDLINE | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM D 4125/D4125M : 2010 | Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
| ASTM D 7000 : 2011 : R2017 | Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples |
| ASTM F 1692 : 2001 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM D 3665 : 2012 | Standard Practice for Random Sampling of Construction Materials |
| ASTM D 8038 : 2016 | Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
| ASTM C 1356 : 2007 : R2012 | Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure |
| ASTM D 693 : 2003 | Standard Specification for Crushed Aggregate for Macadam Pavements |
| ASTM E 2277 : 2014 | Standard Guide for Design and Construction of Coal Ash Structural Fills |
| ASTM C 1293 : 2008 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM E 2060 : 2006 | Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |
| ASTM D 7762 : 2018 : REDLINE | Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash |
| ASTM E 889 : 1982 : R2014 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM D 5081/D5081M : 1990 : R2011 : EDT 1 | Standard Test Method for Aggregate Layer Hiding Power |
| ASTM D 692 : 2000 | Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures |
| ASTM D 3665 : 2012 : R2017 | Standard Practice for Random Sampling of Construction Materials |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASTM F 922 : 2001 : R2011 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| ASTM D 692/D692M : 2015 : REDLINE | Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures |
| ASTM D 6234 : 2013 : REDLINE | Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM C 586 : 2011 : REDLINE | TEST METHOD FOR POTENTIAL ALKALI REACTIVITY OF CARBONATE ROCKS AS CONCRETE AGGREGATES (ROCK-CYLINDER METHOD) |
| ASTM C 35 : 2001 : R2005 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM D 448 : 2012 : R2017 | Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
| ASTM D 1241 : 2015 : REDLINE | Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses |
| AASHTO TP 110 : 2014 | METHOD OF TEST FOR POTENTIAL ALKALI REACTIVITY OF AGGREGATES AND EFFECTIVENESS OF ASR MITIGATION MEASURES (MINIATURE CONCRETE PRISM TEST, MCPT) |
| IEEE 442-1981 | IEEE Guide for Soil Thermal Resistivity Measurements |
| ASTM D 6932/D6932M : 2008 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
| ASTM D 5369 : 1993 : R2003 | Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction |
| ASTM D 5106 : 2015 : REDLINE | Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures |
| ASTM F 922 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| ASTM D 3397 : 1981 | Method of Test for Triaxial Classification of Base Materials, S Oils and Soil (Withdrawn 1987) |
| ANSI/AWWA C300 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, STEEL - CYLINDER TYPE |
| ASTM C 566 : 2013 : REDLINE | TEST METHOD FOR TOTAL EVAPORABLE MOISTURE CONTENT OF AGGREGATE BY DRYING |
| ASTM D 693 : 2003 : REV A | Standard Specification for Crushed Aggregate for Macadam Pavements (Withdrawn 2008) |
| ASTM C 1524 :2002 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM D 4215 : 2007 : R2013 | Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures |
| ASTM E 2278 : 2013 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage |
| ASTM C 1137 : 2005 | Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
| ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| ASTM F 2607 : 2008 : R2014 | Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
| ASTM C 35 : 2001 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM C 1524 : 2002 : REV A | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) |
| ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM C 331/C331M : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate |
| ASTM C 331 : 2005 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM D 5369 : 1993 : R1998 | Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction |
| ASTM D 3319 : 2011 : R2017 | Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM D 6932/D6932M : 2008 : R2013 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
| ASTM F 2607 : 2008 | Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners |
| ASTM E 889 : 1982 : R1996 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM F 555 : 2001 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM C 1105 : 2008 : REV A : R2016 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM F 555 : 2001 : R2011 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM D 1863/D1863M : 2005 : R2011 : EDT 1 | Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
| ACI 304R : 2000 | GUIDE FOR MEASURING, MIXING, TRANSPORTING AND PLACING CONCRETE |
| ASTM C 35 : 2001 : R2014 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
| ACI 311.4R : 2005 | GUIDE FOR CONCRETE INSPECTION |
| ACI 221R : 1996 | GUIDE FOR USE OF NORMAL WEIGHT AND HEAVYWEIGHT AGGREGATES IN CONCRETE |
| ASTM D 7370/D7370M : 2014 : REDLINE | Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
| AASHTO T 96 : 2002 | METHOD OF TEST FOR RESISTANCE TO DEGRADATION OF SMALL-SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE |
| ASTM C 404 : 2011 | Standard Specification for Aggregates for Masonry Grout |
| AASHTO T 96:2002(R2019) | Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM C 87 : 2005 | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| ASTM C 1105 : 2008 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM F 1601 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM D 4223/D4223M : 2012 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM D 5081 : 1990 : R1999 : EDT 1 | Standard Test Method for Aggregate Layer Hiding Power |
| ASTM D 3319 : 2011 | Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel |
| ASTM C 702 : 1998 | Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ASTM F 1601 : 2001 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM D 5081 : 1990 : R2005 | Standard Test Method for Aggregate Layer Hiding Power |
| AWWA C301 : 2014 | PRESTRESSED CONCRETE PRESSURE PIPE, STEEL-CYLINDER TYPE |
| ASTM E 889 : 1982 : R2009 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM D 7172 : 2014 : REDLINE | Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared |
| ASTM D 5711 : 2003 | Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012) |
| ACI 211.1 : 1991 | SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
| ASTM D 7000 : 2011 | Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples |
| ASTM C 35 : 2001 : R2009 | Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster |
| ASTM D 448 :2012 | Standard Classification for Sizes of Aggregate for Road and Bridge Construction |
| ASTM C 1293 : 2008 : REV B | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM D 2940/D2940M : 2015 : REDLINE | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
| ASTM D 5821 : 2013 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 692 : 2000 : R2004 | Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures |
| ASTM C 702/C702M : 2018 : REDLINE | Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ACI 311.5R : 2004 | GUIDE FOR CONCRETE PLANT INSPECTION AND TESTING OF READY-MIXED CONCRETE |
| ASTM F 2797 : 2010 | Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners (Withdrawn 2019) |
| ASTM E 1107 : 2015 : REDLINE | Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations |
| ASTM E 2060 : 2006 : R2014 | Standard Guide for Use of Coal Combustion Products for Solidification/Stabilization of Inorganic Wastes |
| ASTM D 4223 : 1999 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM C 144 : 2018 : REDLINE | Standard Specification for Aggregate for Masonry Mortar |
| ASTM F 1601 : 2001 : R2011 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems |
| ASTM E 2788 : 2011 | Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems |
| ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
| ASTM D 5369 : 1993 : R2008 : EDT 1 | Standard Practice for Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction (Withdrawn 2016) |
| ASTM D 6932 : 2004 | Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures |
| ASTM F 922 : 2001 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| ASTM D 1863 : 2005 | Standard Specification for Mineral Aggregate Used on Built-Up Roofs |
| AWWA B102:2015 | MANGANESE GREENSAND FOR FILTERS |
| ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| UFC 3-260-02 : 2001 | UNIFIED FACILITIES CRITERIA - PAVEMENT DESIGN FOR AIRFIELDS |
| ASTM F 555 : 2001 : R2016 | Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner |
| ASTM F 922 : 2001 : R2006 | Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle |
| ASTM C 123/C123M : 2014 : REDLINE | Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023) |
| ASTM D 4223 : 1999 : R2006 | Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils |
| ASTM C 1356 : 2007 | Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure |
| AWWA C302 : 2016 | REINFORCED CONCRETE PRESSURE PIPE, NONCYLINDER TYPE |
| ASTM D 6155 : 2015 | Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures |
| ASTM C 88 : 2013-08 | TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| ASTM D 4125 : 2005 | Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method |
| ASTM C 1105 : 2008 : REV A | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM F 1692 : 2001 : R2011 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM F 1692 : 2001 : R2016 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM F 1692 : 2001 : R2006 | Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems |
| ASTM D 3515 : 2001 | Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009) |
| ASTM D 4215 : 2007 | Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures |
| ASTM F 1284 : 2009 | Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM C 123 : 2004 | Standard Test Method for Lightweight Particles in Aggregate |
| ASTM E 2243 : 2013 | Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation |
| ASTM D 6704 : 2008 | Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM C 897 : 2015 : REDLINE | Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters |
| ASTM C 1524 : 2002 : REV A : R2010 | Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method) (Withdrawn 2019) |
| ASTM C 131/C131M : 2014 : REDLINE | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 1139 : 2000 | Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments |
| ASTM D 3987 : 2012 : REDLINE | Standard Practice for Shake Extraction of Solid Waste with Water |
| ANSI/AWWA C300:2022+ADD:2023 | Reinforced Concrete Pressure Pipe, Steel-Cylinder Type |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 105 : 2016 : REDLINE | Standard Practice for Probability Sampling of Materials |
| ASTM C 702 : 1998 | Standard Practice for Reducing Samples of Aggregate to Testing Size |
| ASTM D 2234/D2234M : 2017 : REDLINE | Standard Practice for Collection of a Gross Sample of Coal |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.