Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-01-2020

Publisher

American Society for Testing and Materials

1.1This test method covers the determination of the bond strength of fiber-reinforced polymer (FRP) composite bars used as reinforcing bars or pre-stressing tendons in concrete.

1.2Two procedures for casting test specimens are provided. The first procedure aligns the bar with the concrete casting direction. The second procedure aligns the bar’s transverse to the concrete casting direction.

1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee	D 30
DocumentType	Test Method
Pages	9
ProductNote	This standard also refers to ASTM D 7705
PublisherName	American Society for Testing and Materials
Status	Current
Supersedes	ASTM D 7913/D7913M : 2014

ASTM C 511 : 2021	Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM D 883 : 2023	Standard Terminology Relating to Plastics
ASTM C 617/C617M : 2015	Standard Practice for Capping Cylindrical Concrete Specimens
ASTM E 83 : 2023	Standard Practice for Verification and Classification of Extensometer Systems
ASTM C 33/C33M : 2023	Standard Specification for Concrete Aggregates
ASTM E 456 : 2002	Standard Terminology for Relating to Quality and Statistics
ASTM E 83 : 2000 : EDT 1	Standard Practice for Verification and Classification of Extensometer
ASTM D 883 : 2024	Standard Terminology Relating to Plastics
ASTM D 3878 : 2023	Standard Terminology for Composite Materials
ASTM E 83 : 2016	Standard Practice for Verification and Classification of Extensometer Systems
ASTM E 456 : 2013 : REV A : R2022	Standard Terminology Relating to Quality and Statistics
ASTM C 33/C33M : 2018	Standard Specification for Concrete Aggregates
ASTM C 39/C39M : 2021	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM E 83 : 1998 : EDT 1	Standard Practice for Verification and Classification of Extensometer
ASTM E 456 : 2013 : REV A : R2022 : EDT 1	Standard Terminology Relating to Quality and Statistics
ASTM C 192/C192M : 2000	Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
ASTM C 39/C39M : 2023	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM D 883 : 2022	Standard Terminology Relating to Plastics
ASTM D 883 : 2020 : REV B	Standard Terminology Relating to Plastics
ASTM E 6 : 2002	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 7205/D7205M : 2021	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 456 : 2013 : REV A : R2017 : EDT 5	Standard Terminology Relating to Quality and Statistics
ASTM E 122 : 2017 : R2022	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM E 122 : 2017	Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM C 39/C39M : 2015 : REV A	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM A 944 : 2010 : R2015	Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM C 511 : 2019	Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM D 3878 : 2019 : REV A	Standard Terminology for Composite Materials
ASTM D 3878 : 2020 : REV A	Standard Terminology for Composite Materials
ASTM C 150/C150M : 2021	Standard Specification for Portland Cement
ASTM C 617/C617M : 2023	Standard Practice for Capping Cylindrical Concrete Specimens
ASTM C 39/C39M : 2020	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM F 2203 : 2013 : R2022	Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM D 7205/D7205M : 2006 : R2016	Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM E 6 : 2015 : EDT 3	Standard Terminology Relating to Methods of Mechanical Testing
ASTM D 3878 : 2020 : REV B	Standard Terminology for Composite Materials
ASTM E 6 : 2023 : REV A	Standard Terminology Relating to Methods of Mechanical Testing
ASTM C 143/C143M : 2015 : REV A	Standard Test Method for Slump of Hydraulic-Cement Concrete
ASTM E 4 : 2021	Standard Practices for Force Calibration and Verification of Testing Machines
ASTM F 2203 : 2013 : R2018	Standard Test Method for Linear Measurement Using Precision Steel Rule
ASTM D 3878 : 2020 : REDLINE	Standard Terminology for Composite Materials
ASTM D 3878 : 2020	Standard Terminology for Composite Materials
ASTM C 39/C39M : 2018	Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
ASTM E 6 : 2015 : EDT 4 : REDLINE	Standard Terminology Relating to Methods of Mechanical Testing
ASTM C 150/C150M : 2020	Standard Specification for Portland Cement
ASTM E 6 : 2015 : EDT 4	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 6 : 2023	Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 456 : 2013 : REV A : R2017 : EDT 4	Standard Terminology Relating to Quality and Statistics
ASTM E 456 : 2013 : REV A : R2017 : EDT 6	Standard Terminology Relating to Quality and Statistics
ASTM C 150/C150M : 2022	Standard Specification for Portland Cement
ASTM E 1012 : 2019	Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D 3878 : 2001	Standard Terminology Composite Materials
ASTM A 944 : 2022	Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens