• There are no items in your cart

ASTM D 792 : 2013 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
Available format(s)

PDF

Superseded date

08-05-2020

Language(s)

English

Published date

11-01-2013

CONTAINED IN VOL. 08.01, 2015 Defines the determination of the specific gravity (relative density) and density of solid plastics in forms such as sheets, rods, tubes, or molded items.

1.1These test methods describe the determination of the specific gravity (relative density) and density of solid plastics in forms such as sheets, rods, tubes, or molded items.

1.2Two test methods are described:

1.2.1Test Method A—For testing solid plastics in water, and

1.2.2Test Method B—For testing solid plastics in liquids other than water.

1.3The values stated in SI units are to be regarded as the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Note 1This standard is not equivalent to ISO 1183–1 Method A. This test method provides more guidelines on sample weight and dimension. ISO 1183-1 allows testing at an additional temperature of 27 ± 2°C.

Committee
D 20
DocumentType
Redline
Pages
7
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 1593 : 2013 : REDLINE Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
ASTM F 636 : 1985 : R1991 Guide for Selection of Tests for Material Properties of Transfer Molding Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
ASTM D 7471 : 2009 : R2014 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
SAE AMS 3209 : 2014 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 65 - 75
MIL-C-47224 Revision B:1993 COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT
ASTM D 8101/D8101M : 2017 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
ASTM D 5436 : 2015 : REDLINE Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
SAE AMS 3658 : 2011 Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected(STABILIZED Aug 2011)
MIL-B-44421 Base Document:1991 Body Armor, Small Arms Protective, Aircrew, Survival (No S/S Document)
CSA S807 : 2010 : R2015 SPECIFICATION FOR FIBRE-REINFORCED POLYMERS
96/702229 DC : 0 PREN 4236 - AEROSPACE SERIES - PIPE COUPLINGS 60 DEGREES; EXTRUDED PTFE TUBE FOR TEMPERATURES BETWEEN -70 DEGREES C AND +250 DEGREES C
MIL-P-50900 Base Document:1971 PELLET, PLASTIC BONDED HMX (95/5) FOR USE IN AMMUNITION
MIL PRF 11891 : F TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR - ELASTOMERIZED
SAE AMS 3912 : 2014 RADOMES, FOAM SANDWICH, POLYIMIDE/QUARTZ CLOTH CONSTRUCTION
ASTM F 510 : 1993 : R1999 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
MIL-PRF-5425 Revision E:1998 PLASTIC SHEET, ACRYLIC, HEAT RESISTANT
CSA N285.5 : 2013 PERIODIC INSPECTION OF CANDU NUCLEAR POWER PLANT CONTAINMENT COMPONENTS
L-P-535 Revision E:1979 PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID
MIL-PRF-46846 Revision D:2013 Rubber, Synthetic, Heat - Shrinkable
SAE AMS 3731 : 2016 POTTING COMPOUND, EPOXY, BISPHENOL A-TYPE
SAE AS 4388 : 2013 HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC
MIL-P-25518 Revision B:1981 Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated
CSA Z245.20-Z245.21 : 2006 EXTERNAL FUSION BOND EPOXY COATING FOR STEEL PIPE/EXTERNAL POLYETHYLENE COATING FOR PIPE
ASTM D 6457 : 2008 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
MIL-M-24476 Revision B:1993 MOUNT, RESILIENT, TYPES 7M5O, 6M15O, 6M45O AND 6M9OO
MIL-DTL-24191 Revision D:1996 PLASTIC SHEET, CELL OR CONTINUOUS CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING)
MIL-B-41816 Revision H:1990 BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD)
MIL P 85891 : A PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS
ASTM D 1457 : 1992 Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
MIL-P-48648 Base Document:1986 PROJECTILE, 155MM, TEST, NON-HAZARDOUS, M718A1/M741A1 TYPES LOADING, ASSEMBLING AND PACKING OF
MIL-DTL-24487 Revision B:2005 TILE, RUBBER VIBRATION DAMPING, TYPE 5
MIL-M-48245 Revision B:1988 MOLDING COMPOUND, HOUSING
MIL-PRF-46197 Revision A:1997 LAMINATE: HIGH-STRENGTH GLASS, FABRIC-REINFORCED, POLYESTER RESIN PREIMPREGNATED
MIL-A-63187 Base Document:1982 ADHESIVE, POLYAMIDE EPOXY M753 8 INCH PROJECTILE
ASTM D 5476 : 1999 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)
MIL-DTL-11891 Revision G:1998 TRACK SHOE SETS, TRACK SHOE ASSEMBLIES, TRACK SHOE PADS AND TRACK SHOE BUSHINGS, VEHICULAR: ELASTOMERIZED
MIL M 17508 : F MOUNTS, RESILIENT: TYPES 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, AND 6E900BB
MIL-DTL-32169 Base Document:2004 WHEEL ASSEMBLIES, POLYURETHANE; FOR THE BRADLEY FIGHTING VEHICLE
MIL-DTL-17508 Revision G:2017 Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB
ASTM E 1783 : 1996 : R2000 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
MIL-DTL-24709 Revision A:2018 PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64
ASTM F 1837M : 1997 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F 942 : 2002 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM F 1876 : 1998 : R2003 : EDT 1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications (Withdrawn 2012)
ASTM D 6416/D6416M : 2016 : REDLINE Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
ASTM F 878 : 1995 Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000)
MIL-P-46122 Revision B:1975 PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER
A-A-59530 Revision A:2000 BOOT, SAFETY, (8 INCH)
MIL-R-47025 Revision A:1991 RESIN, CASTING, FIRE RETARDANT, EPOXY BASE
CSA B481 SERIES : 2012 GREASE INTERCEPTORS
MIL-P-46185 Base Document:1983 PLASTIC MOLDING & EXTRUSION MATERIALS, POLYETHERSULFONE
MIL-C-13125 Revision C:1983 COMPOUND: MOUNTING FOR OPTICAL LENS BLANKS
MIL H 27267 : B HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE
MIL-P-43043 Revision C:1978 PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED
03/312144 DC : DRAFT JULY 2003 ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE
ASTM D 1201 : 2013 : REDLINE Standard Specification for Thermosetting Polyester Molding Compounds
MIL-P-53028 Base Document:1983 PROPELLANT, ROCKET MOTOR, ROCKET, HIGH EXPLOSIVE, 345 MILLIMETER, XM 130
MIL T 24487 : A TILE, RUBBER VIBRATION DAMPING, TYPE MIRL NO. 3
MIL P 8184 : E PLASTIC SHEET, ACRYLIC, MODIFIED
MIL-P-70762 Base Document:1990 PROPELLANT, COMPOSITE, CAST FOR USE IN SIMULATOR, MISSILE: SAGGER XM27
ANSI S2.22 : 1998 : R2007 RESONANCE METHOD FOR MEASURING THE DYNAMIC MECHANICAL PROPERTIES OF VISCOELASTIC MATERIALS
ASTM D 5687/D5687M : 1995 : R2015 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
CSA B481 SERIES : 2012 : R2017 GREASE INTERCEPTORS
L-P-1041 Revision A:1973 PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER
MIL-C-47244 Revision A:1990 COATING, ABLATIVE RESISTANT
MIL-P-46133 Revision A:1974 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLY (ARYL SULFONE ETHER) RESIN, THERMOPLASTIC
SAE AS 81765 : 2017 INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ASTM F 599 : 1995 Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004)
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ASTM F 942 : 2002 : R2008 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
ASTM D 7766/D7766M : 2016 : REDLINE Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM D 3795 : 2000 : REV A Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ISO 18437-2:2005 Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 2: Resonance method
ASTM D 3308 : 2012 : R2017 Standard Specification for PTFE Resin Skived Tape
ANSI S2.22 : 1998 RESONANCE METHOD FOR MEASURING THE DYNAMIC MECHANICAL PROPERTIES OF VISCOELASTIC MATERIALS
ASTM D 7176 : 2006 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM D 4321 : 2015 : REDLINE Standard Test Method for Package Yield of Plastic Film
ASTM A 974 : 1997 : R2016 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
ISO 14607:2007 Non-active surgical implants Mammary implants Particular requirements
ASTM F 2881 : 2011 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 7248/D7248M : 2012 : R2017 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D 3410/D3410M : 2016 : REDLINE Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D 6415/D6415M : 2006 : REV A : EDT 1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 1248 : 2016 : REDLINE Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
ASTM F 602 : 2009 Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM F 1551 : 2009 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
SAE AMS 3255 : 2017 SEALING TAPE, SHEET, OR GASKET, POLYTETRAFLUOROETHYLENE, EXPANDED (EPTFE) OIL AND WATER RESISTANT
ASTM F 2818 : 2010 : R2014 : EDT 1 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
SAE AMS 3670/1 : 2004 UNFILLED POLYAMIDE-IMIDE BAR, ROD, AND SHAPES
ASTM D 2344/D2344M : 2016 : REDLINE Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D 705 : 1999 : R2012 Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM D 5212 : 2003 Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)
ASTM F 2881 : 2011 : R2015 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 2103 : 2015 : REDLINE Standard Specification for Polyethylene Film and Sheeting
ASTM D 7137/D7137M : 2017 : REDLINE Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D 6779 : 2017 : REDLINE Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ASTM D 619 : 2014 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D 5379/D5379M : 2012 : REDLINE Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
ASTM D 7136/D7136M : 2015 : REDLINE Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D 7905/D7905M : 2014 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D 705 : 1999 : R2004 Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM D 3368 : 2017 : REDLINE Standard Specification for FEP Sheet and Film
ASTM D 3308 : 2012 Standard Specification for PTFE Resin Skived Tape
ASTM D 5577 : 1994 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
ASTM D 3214 : 1996 Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002)
ISO 21809-1:2011 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ASTM E 1612 : 1994 : R2000 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ISO 15676:2016 Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
ASTM E 1556 : 2012 : REDLINE Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
ASTM D 3981 : 2009 : REV A : R2016 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM D 6411/D6411M : 1999 : R2005 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM F 2468 : 2005 : R2011 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
ASTM D 5467/D5467M : 1997 : R2017 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
ASTM A 974 : 1997 : R2011 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
ASTM E 1612 : 1994 : R2005 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 1039 : 2016 : REDLINE Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation
ASTM D 705 : 1999 Standard Specification for Urea-Formaldehyde Molding Compounds
ASTM F 2818 : 2010 : R2014 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM D 3489 : 2017 : REDLINE Standard Test Methods for Microcellular Urethane Materials
ASTM D 7078/D7078M : 2012 : REDLINE Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D 7914/D7914M : 2014 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM F 1551 : 2009 : R2017 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
ASTM D 4242 : 2007 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
NFPA 262 : 2015 METHOD OF TEST FOR FLAME TRAVEL AND SMOKE OF WIRES AND CABLES FOR USE IN AIR-HANDLING SPACES
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
ISO 13628-10:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe
MIL H 25579 : E HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR
MIL-P-46131 Revision B:1975 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED, GLASS FIBER REINFORCED
MIL-P-46120 Revision B:1983 PLASTIC MOLDING AND EXTRUSION MATERIAL POLYSULFONE
MIL-P-46129 Revision A:1975 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED
MIL-P-46144 Revision C:1986 PLASTIC SHEET, POLYCARBONATE
MIL P 46169 : A PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBER REINFORCED (FOR GENERAL PURPOSE APPLICATIONS)
MIL-P-46179 Revision A:1986 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE
MIL-P-46161 Revision A:1976 PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED
MIL-P-46115 Revision B:1977 PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE
SAE AMS 3659 : 2011 POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS PREMIUM STRENGTH, SINTERED AND STRESS-RELIEVED
ASTM D 3124 : 1998 : R2011 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
MIL-C-47221 Revision A:1982 COMPOUND, MOLDING, EPOXY RESIN, SILICON DIOXIDE AND ASBESTOS FIBER FILL
ASTM F 876 : 2017 : REDLINE SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING
MIL-DTL-27267 Revision D:2012 Hose, Cres Wire Reinforced, Polytetrafluoroethylene, Four Hundred Fifty Degree Fahrenheit, Medium Pressure
MIL-I-23594 Revision C:1988 INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE
MIL I 23053 : D INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED
ASTM E 1783 : 1996 : R2005 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
WW-L-2887 Base Document:1998 TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS
MIL-P-63208 Revision B:1985 PROJECTILE, 105 MM, HEAT T, M622 METAL PARTS
CSA S808 : 2014 SPECIFICATION FOR FIBRE-REINFORCED POLYMER (FRP) MATERIALS FOR EXTERNALLY REINFORCING STRUCTURES
SAE AMS 3733 : 2015 POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH
SAE J 2253 : 2017 TEST PROCEDURES FOR AUTOMOTIVE STRUCTURAL COMPOSITE MATERIALS
MIL R 46846 : B RUBBER, SYNTHETIC, HEAT-SHRINKABLE
ASTM D 4617 : 2003 Standard Classification System for Phenolic Compounds (PF) (Withdrawn 2012)
SAE AMS 3652 : 2015 POLYTETRAFLUOROETHYLENE (PTFE) FILM, NON-CRITICAL GRADE
MIL-P-43038 Revision B:1973 PLASTIC MOLDING MATERIAL, POLYESTER, LOW PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT
MIL P 5425 : D PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT
DOD-C-70514 Base Document:1985 Cartridge, 120MM, Super Slug, Load, Assemble, and Pack
MIL-I-82819 Base Document:1986 INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED
MIL T 11891 : E TRACK SHOE ASSEMBLY, TRACK SHOE SETS, TRACK SHOE PADS, & TRACK SHOE BUSHINGS, VEHICULAR, ELASTOMERIZED
MIL-P-60811 Revision B:1984 PROJECTILE, 105 MM, TP-T, M489 METAL PARTS ASSEMBLY
MIL-DTL-32435 Base Document:2013 Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure
SAE AMS 3670 : 2003 POLYAMIDE-IMIDE BAR, ROD, & SHAPES, MOLDED OR EXTRUDED
MIL-P-81255 Revision A:1976 PLASTIC MOLDING MATERIAL, ASBESTOS PHENOLIC
ASTM D 7472 : 2009 : R2014 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
ASTM C 1115 : 2017 : REDLINE Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
ASTM D 3295 : 2015 : REDLINE Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
MIL-PRF-32407 Revision A:2016 MOUNTS, RESILIENT (SURFACE SHIP APPLICATION)
MIL-I-81765 Revision A:1987 INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
ASTM F 2805 : 2016 : REDLINE Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
ASTM D 4242 : 2007 : R2013 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
ASTM D 6867 : 2003 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
AASHTO M 330 : 2013 SPECIFICATION FOR POLYPROPYLENE PIPE, 300- TO 1500-MM (12- TO 60-IN.) DIAMETER
SAE AMS 3263 : 1997 SEALING COMPOUND, POLYTHIOETHER, AMBIENT CURE OR IMMEDIATE HEAT CURE FOR AIRCRAFT STRUCTURES, FUEL RESISTANT WITH INTERMITTENT USE TO 400 MDCF (204 MDCC)
04/301931 DC : DRAFT JAN 2004 ISO 13628-2 - PETROLEUM AND NATURAL GAS INDUSTRIES DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
NF EN ISO 23936-1 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-DTL-81716 Revision A:2009 PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F)
MIL-I-16923 Revision H:1991 INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY
MIL D 24709 : 0 DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64
L-P-398 Revision B:1973 PLASTIC MOLDING MATERIAL STYRENE-BUTADIENE
MIL-P-22241 Revision B:1973 PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN)
MIL-B-43154 Revision M:1992 BOOTS, HOT WEATHER
MIL-L-24518 Base Document:1975 LAMINATE, VINYL FILM ALUMINUM, DECORATIVE
MIL-P-46067 Revision B:1977 PLASTIC EMBEDDING COMPOUND, EPOXY RESIN SYSTEM
SAE AMS 3102 : 2017 SEALING COMPOUND, POLYTHIOETHER RUBBER FAST CURING, LIGHT WEIGHT (SPECIFIC GRAVITY 0.78, MAX.) FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
MIL-PRF-8184 Revision F:1998 PLASTIC SHEET, ACRYLIC MODIFIED
MIL-R-47004 Base Document:1974 RESIN, EPOXY BASE, THIXOTROPIC
ASTM D 3222 : 2005 : R2015 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
MIL-P-50977 Base Document:1972 PELLETS (PBX) FOR USE IN AMMUNITION
MIL-P-46036 Revision B:1973 PLASTIC SHEET, RODS, TUBES AND DISCS, POLYCHLOROTRIFLUOROETHYLENE
A-A-2848 Base Document:1994 PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE (PET) AND GLYCOL MODIFIED POLYETHYLENE TEREPHTHALATE (PETG)
MIL-DTL-83528 Revision H:2018 Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for
ASTM D 5575 : 2007 : R2013 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 6856/D6856M : 2003 : R2008 : EDT 1 Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
ASTM D 3039/D3039M : 2017 : REDLINE Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
DOD-STD-35-36 Revision B:1979 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING
ASTM D 1430 : 2017 : REDLINE Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
SAE AMS 3811 : 2016 Rods, Aramid Fiber, Polyester Resin Coated Pultrusion
ASTM D 6411/D6411M:1999 Standard Specification for Slicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
SAE AMS 3897 : 2016 CLOTH, CARBON FIBER, RESIN IMPREGNATED
ASTM F 635 : 1985 : R1991 Guide for Selection of Tests for Material Properties of Liquid Thermoset Encapsulating Compounds for Electronic and Microelectronic Encapsulation (Withdrawn 1996)
ASTM F 2042 : 2000 : R2005 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM D 704 : 1999 Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM F 3087 : 2015 Standard Specification for Acrylic Molding Resins for Medical Implant Applications
MIL-E-82898 Base Document:1994 EXPLOSIVE, PLASTIC BONDED, CAST PBX(AF)-108
L-P-399 Revision B:1970 PLASTIC MOLDING MATERIAL, ION MATERIAL, STYRENE ACRYLONITRILE COPOLYMERS
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
MIL-DTL-64154 Revision B:2008 LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC
MIL W 83420 : E WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL
MIL-P-82650 Base Document:1976 PLASTIC MOLDING MATERIAL, GLASS PHENOLIC
MIL-A-50424 Base Document:1969 ACETAL, SHEETING (FOR USE WITH AMMUNITION)
MIL-C-82805 Base Document:1989 COMPOUND, SILICONE RUBBER, HIGH STRENGTH, TWO-PART
ASTM F 2042 : 2000 : EDT 1 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
SAE AS 38390 : 2013 Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 160 °F, Covered Pneumatic
SAE AS 22759 : 2014 WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
ASTM D 8066/D8066M : 2017 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
SAE J 1875 : 2001 MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS
ASTM D 5449/D5449M : 2016 : REDLINE Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
SAE AMS 3668 : 2011 POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, PREMIUM GRADE, AS SINTERED
AWWA C901 : 2017 POLYETHYLENE (PE) PRESSURE PIPE AND TUBING, 3/4 IN. (19 MM) THROUGH 3 IN. (76 MM), FOR WATER SERVICE
ANSI/AAMI/ISO 15676:2016 CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
NSF 52 : 2017 SUPPLEMENTAL FLOORING
SAE AMS 3259 : 1997 SEALING COMPOUND, POLYTHIOETHER - NONCHROMATED, CORROSION INHIBITING FOR INTERMITTENT USE TO 360 DEGREE F (182 DEGREE C)
ASTM D 5514/D5514M : 2018 : REDLINE Standard Test Method for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
SAE AS 81550A : 2014 INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE
ASTM F 665 : 2009 : R2015 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
ASTM F 1837M : 1997 : R2012 : EDT 1 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
SAE AMS 3678 : 2016 POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS AND EXTRUSIONS, UNFILLED, PIGMENTED, AND FILLED
ASTM D 704 : 1999 : R2012 Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM A 978/A978M : 2008 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
ASTM D 7205/D7205M : 2006 : R2016 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM F 2150 : 2013 : REDLINE Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
ASTM D 7031 : 2011 : REDLINE GUIDE FOR EVALUATING MECHANICAL AND PHYSICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE PRODUCTS
(INACTIVE RECORD)ASTM D 5336 : 2015-04 CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
ASTM C 364/C364M : 2016 : REDLINE Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
ASTM D 4067 : 2016 : REDLINE Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
ASTM E 1612/E1612M : 1994 : R2017 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM D 6856 : 2003 : R2008 Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
ASTM D 4801 : 2008 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater
ASTM D 7205/D7205M : 2006 : R2011 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D 3935 : 2015 : REDLINE Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
ASTM D 3275 : 2008 : R2013 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D 6867 : 2003 : R2014 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
ASTM F 2026 : 2017 : REDLINE Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
ASTM D 3350 : 2014 : REDLINE Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 6455 : 2011 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
ASTM D 3275 : 2008 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
ASTM D 5450/D5450M : 2016 : REDLINE Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5575 : 2007 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM F 3219 : 2017 Standard Specification for 3 to 30 in. (75 To 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings
ASTM F 988 : 1986 Guide for Specifying Carbon-Fiber Randomly Reinforced Ultra-High-Molecular-Weight Polyethylene for Medical Devices (Withdrawn 1992)
ASTM D 5140 : 1995 Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)
ASTM D 6457 : 2008 : R2013 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018)
ASTM F 3253 : 2017 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
ASTM D 1675 : 2003 : R2011 Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D 3159 : 2015 : REDLINE Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM D 704 : 1999 : R2004 Standard Specification for Melamine-Formaldehyde Molding Compounds
ASTM D 6856/D6856M : 2003 : R2016 Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
ASTM F 2896 : 2011 : R2017 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM F 561 : 2013 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM E 990 : 2013 : REDLINE Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
ASTM F 2854 : 2010 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM D 7913/D7913M : 2014 Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
SAE AS 23053 : 2016 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
AASHTO R 63 : 2013 PRACTICE FOR SOLID WALL HIGH-DENSITY POLYETHYLENE (HDPE) CONDUIT FOR NON-PRESSURE APPLICATIONS USED FOR THE PROTECTION OF POWER AND TELECOMMUNICATIONS CABLES
ASTM D 5977 : 2015 : REDLINE Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
ASTM D 3981 : 2009 : REV A Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
MIL H 38390 : C HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE
MIL-P-63293 Revision B:1983 PROJECTILE, 105 MM, HEAT T MP, M456A2 METAL PARTS ASSEMBLY
SAE AMS 3662 : 2015 POLYTETRAFLUOROETHYLENE FILM, GENERAL PURPOSE GRADE
MIL-DTL-26633 Revision F:2014 HOSE ASSEMBLY, NONCONDUCTIVE, POLYTETRAFLUOROETHYLENE, OXYGEN
ASTM D 6495/D6495M : 2018 : REDLINE Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
MIL-DTL-83723-27 Revision C:2015 CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING
MIL-A-81264 Base Document:1965 ASBESTOS FELT OR MAT, RESIN IMPREGNATED
ASTM D 7205/D7205M:2006 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
MIL-H-38360 Revision B:1966 HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC
ASTM D 3287 : 1989 Specification for Biaxially Oriented Polyethylene (PEO) Plastic Pipe (SDR-PR) Based on Controlled Outside Diameter (Withdrawn 1989)
ASTM D 3795 : 2000 : REV A : R2012 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D 2734 : 2016 : REDLINE Standard Test Methods for Void Content of Reinforced Plastics
MIL-PRF-2765 Revision E:2004 RUBBER SHEET, STRIP, EXTRUDED, AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT
L-C-530 Revision C:1987 COATING, PIPE, THERMOPLASTIC RESIN
MIL G 47034 : A NOTICE 1 GLASS, FILTER, COLORED
SAE AMS 3669 : 2012 POLYTETRAFLUOROETHYLENE (PTFE) SHEET, MOLDED, PREMIUM GRADE, AS SINTERED
ASTM D 8131/D8131M : 2017 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
ASTM D 6394 : 2014 : REDLINE Standard Specification for Sulfone Plastics (SP)
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
ASTM D 6645 : 2001 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM D 5577 : 1994 : R2003 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
API 15LT : 1993 SPECIFICATION FOR PVC LINED STEEL TUBULAR GOODS
CSA S807 : 2010 SPECIFICATION FOR FIBRE-REINFORCED POLYMERS
SAE AMS T 81914 : 2013 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
ASTM D 787 : 2012-08 SPECIFICATION FOR ETHYL CELLULOSE MOLDING AND EXTRUSION COMPOUNDS
AWWA D121 : 2014 BOLTED ABOVEGROUND THERMOSETTING FIBERGLASS-REINFORCED PLASTIC PANEL-TYPE TANKS FOR WATER STORAGE
MIL-P-60646 Revision B:1984 PROJECTILE, 105 MM, HEAT-T, M456A1 METAL PARTS
ASTM D 349 : 2013 : REDLINE Standard Test Methods for Laminated Round Rods Used for Electrical Insulation
MIL-G-47032 Revision A:1990 GLASS, POTASH SODA BARIUM, LEAD FREE COMPRESSION SEALING
ASTM D 6264/D6264M : 2017 : REDLINE Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D 2287 : 2012 : REDLINE Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
SAE AMS 3906 : 2016 GLASS TAPE AND FLAT SHEET, NON-WOVEN CLOTH EPOXY RESIN IMPREGNATED, FOR HAND AND MACHINE LAYUP
A-A-58092 Base Document:1997 TAPE, ANTISEIZE, POLYTETRAFLUOROETHYLENE
ASTM D 2474 : 1992 Specification for Vinyl Chloride Copolymer Resins (Withdrawn 1999)
A-A-55697 Revision B:2012 Tube, Nonmetallic; Polyvinyl Chloride (PVC) Flexible (for Laboratory and Medical Use)
SAE AS 81914 : 2016 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
SAE AMS 3829 : 2016 CLOTH, TYPE 'E' GLASS, STYLE 7781 FABRIC, SOLUTION-ADDITION-TYPE PMR 15 POLYIMIDE RESIN IMPREGNATED
SAE AMS 3656 : 2011 POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, NORMAL STRENGTH, AS SINTERED
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-P-48649 Base Document:1986 PROJECTILE, 155MM, M718A1/M741A1 TYPES, LOADING, ASSEMBLING AND PACKING OF
ASTM D 4549 : 2015 : REDLINE Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
ASTM D 3307 : 2016 : REDLINE Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
SAE AMS P 46144 : 2015 PLASTIC SHEET, POLYCARBONATE
MIL-P-63514 Revision A:1986 PROJECTILE, 105MM, TP-T, M489A1, METAL PARTS ASSEMBLY
A-A-59528 Base Document:1999 SHOE, MOLDERS
ANSI S2.22 : 1998 : R2012 RESONANCE METHOD FOR MEASURING THE DYNAMIC MECHANICAL PROPERTIES OF VISCOELASTIC MATERIALS
NACE RP 01 85 : 0 EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE
L-P-391 Revision D:1975 PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS)
L-P-1183 Revision B:1977 PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID
MIL-DTL-19863 Revision E:2018 Mount, Resilient: Type 5B5,000H
SAE J 1345 : 1995 AUTOMOTIVE PLASTIC PARTS SPECIFICATION
SAE AMS 3847 : 1994(S2016) CLOTH, QUARTZ, 'B' STAGE POLYIMIDE RESIN IMPREGNATED, STYLE 581 FABRIC, 315 DEGREES C (599 DEGREES F)
API 15LE : 2008 : R2013 SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
ASTM F 790 : 2008 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
ASTM F 2929 : 2017 : REDLINE Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
ASTM A 974 : 1997 : R2003 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A-A-52407 Revision A:1998 GLASS, FILTER, COLORED
ASTM D 2671 : 2013 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
MIL-T-81914 Base Document:1973 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
ASTM D 5467/D5467M : 1997 : R2004 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
MIL P 24191 : D PLASTIC SHEET, CAST, ACRYLIC, SHIPBOARD APPLICATION (ILLUMINATION AND SIGNAL LIGHTING)
MIL-PRF-82736 Revision A:1988 IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
L-P-600 Revision A:1972 PORTFOLIO, PLASTIC
MIL C 47070 : 0 COMPOUND, URETHANE
SAE AMS 3628 : 2011 PLASTIC EXTRUSIONS AND MOLDINGS, POLYCARBONATE, GENERAL PURPOSE
MIL-PRF-19769 Revision C:2009 Gaskets, Synthetic Rubber Oil Resistant, Slide Valve (for 21-Inch Submerged Torpedo Tubes)
SAE AS 2078 : 2015 TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE)
CSA B137 COMPENDIUM : 2017 THERMOPLASTIC PRESSURE PIPING COMPENDIUM
ASTM D 3124 : 1998 : R2003 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
SAE AMS 3657 : 2011 POLYTETRAFLUOROETHYLENE (PTFE) EXTRUSIONS, PREMIUM STRENGTH, AS SINTERED
ASTM PS 93 : 1998 Provisional Standard Specification for Fabricated Shapes and Finished Parts Fabricated From Polyimide Resins (Withdrawn 2001)
ASTM D 3553 : 1976 : R1996 Standard Test Method for Fiber Content by Digestion of Reinforced Metal Matrix Composites (Withdrawn 2000)
SAE AS 85848 : 2017 SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
CSA C22.2 No. 18.3 : 2012 CONDUIT, TUBING, AND CABLE FITTINGS
C22.2 NO. 18.3-12 (R2017) Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B)
ASTM F 942 : 2002 : R2013 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
API TR 1PER15K-1 : 2013 PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT
SAE AMS 3844 : 2016 Cloth, Type "E" Glass, Style 7781 Fabric Hot-Melt, Addition-Type, Polyimide Resin Impregnated
ASTM E 2203 : 2014 : R2018 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
ASTM D 3124 : 1998 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 7957/D7957M : 2017 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
ASTM D 5889/D5889M : 2018 : REDLINE Standard Practice for Quality Control of Geosynthetic Clay Liners
SAE AMS 3377 : 2015 SEALING COMPOUND, ELECTRICALLY CONDUCTIVE CORROSION INHIBITING
SAE AMS 3359 : 2016 SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 TO 400 POISES (20 TO 40 PAS) VISCOSITY
SAE AMS 3812 : 2016 RODS, GLASS FIBER, POLYESTER RESIN, LOADED PULTRUSION
ASTM D 7471 : 2009 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
AWWA C906:2015 POLYETHYLENE (PE) PRESSURE PIPE AND FITTINGS, 4 IN. THROUGH 65 IN. (100 MM THROUGH 1,650 MM), FOR WATERWORKS
ASTM D 729 : 1995 Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)
ASTM D 6742/D6742M : 2017 : REDLINE Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
ANSI/AWWA C224 : 2017 NYLON-11-BASED POLYAMIDE COATINGS AND LININGS FOR STEEL WATER PIPE AND FITTINGS
BS ISO 18437-2 : 2005 MECHANICAL VIBRATION AND SHOCK - CHARACTERIZATION OF THE DYNAMIC MECHANICAL PROPERTIES OF VISCO-ELASTIC MATERIALS - PART 2: RESONANCE METHOD
ASTM E 285 : 2008 : R2015 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM D 3795 : 2000 : REV A : R2006 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ACI 423.7 : 2014 SPECIFICATION FOR UNBONDED SINGLE-STRAND TENDON MATERIALS
ASTM F 510 : 1993 : R2008 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
ASTM D 7332/D7332M : 2016 : REDLINE Standard Test Method for Measuring the Fastener Pull-Through Resistance of a <brk/>Fiber-Reinforced Polymer Matrix Composite
SAE MA 2126 : 2015 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), UP TO 232 DEGREES C AND 10 500 KPA PROCUREMENT SPECIFICATION, METRIC
ASTM D 5204 : 2017 : REDLINE CLASSIFICATION SYSTEM FOR POLYAMIDE-IMIDE (PAI) MOLDING AND EXTRUSION MATERIALS
SAE AMS 3960 : 2015 Advanced Composites Prepreg - Nominal 250 °F Cure - Carbon Fiber and Epoxy Resin, Unidirectional Tape
FM 4880 : 2017 EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS
ASTM F 602 : 2009 : R2014 Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D 4203 : 2017 : REDLINE Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
ASTM D 6339 : 2011 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
ASTM A 978/A978M : 2008 : R2013 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications (Withdrawn 2020)
API 15S : 2016 SPOOLABLE REINFORCED PLASTIC LINE PIPE
ASTM E 285 : 2008 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
ASTM D 5229/D5229M : 2014-06 TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS
ASTM E 1783 : 1996 : R2009 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM F 2042 : 2000 : R2011 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication
ASTM D 4349 : 2016 : REDLINE Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
ASTM D 6411/D6411M : 1999 : R2012 Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
ASTM F 510/F510M : 2014 : REDLINE Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM F 423 : 1995 Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002)
ASTM D 7291/D7291M : 2015 : REDLINE Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D 305 : 1984 : R2003 Standard Test Method for Solvent-Extractable Material in Black Pigments
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
NASA KSC SPEC E 0029 : 1972 COMPOUND, POTTING AND MOLDING ELASTOMERIC, SPECIFICATION FOR
ASTM D 3485 : 2015 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)
CSA S806: 2012 DESIGN AND CONSTRUCTION OF BUILDING STRUCTURES WITH FIBRE-REINFORCED POLYMERS
ASTM C 1349 : 2017 : REDLINE Standard Specification for Architectural Flat Glass Clad Polycarbonate
S806-12 (R2017) Design and construction of building structures with fibre-reinforced polymers
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
EN ISO 13628-10:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006)
ASTM F 510 : 1993 : R2004 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
ASTM D 6248 : 1998 : R2004 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
ASTM D 1045 : 2014 : REDLINE Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
FM 4882 : 2016 CLASS 1 INTERIOR WALL AND CEILING MATERIALS OR SYSTEMS FOR SMOKE SENSITIVE OCCUPANCIES
SAE AMS 3903 : 2013 CLOTH, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS, EPOXY RESIN IMPREGNATED
ASTM D 2116 : 2016 : REDLINE Standard Specification for FEP Resin Molding and Extrusion Materials
SAE AMS 3650 : 2012 RODS, SHEETS, AND MOLDED SHAPES, POLYCHLOROTRIFLURORETHYNEN (PCTFE) UNPLASTICIZED
MIL H 26633 : C HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN
ASTM D 5514 : 2006 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
MIL-P-85364 Revision A:1993 PROPELLANT CTBN 23-17
SAE AMS 3732 : 2015 POTTING COMPOUND, EPOXY ONE PART, FILLED, HEAT CURE, LOW CTE
MIL-I-7444 Revision D:1984 INSULATION SLEEVING, ELECTRICAL FLEXIBLE
MIL-T-47023 Base Document:1974 TAPE, HEAT SHRINKABLE
MIL-M-81999 Revision A:1977 Molding Compound, Reversion Resistant, Non-Carcinogen Curing Polyurethane, Aircraft Structure
ASTM D 6248 : 1998 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
MIL-F-63463 Base Document:1979 FILM, INHIBITING, ETHYL, CELLULOSE
I.S. EN ISO 21809-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
MIL-PRF-82791 Base Document:1990 RUBBER, SILICONE, RTV
03/305847 DC : DRAFT APR 2003 ISO 18437-2 - MECHANICAL VIBRATION AND SHOCK - CHARACTERISATION OF THE DYNAMIC MECHANICAL PROPERTIES OF RESILIENT MATERIALS - PART 2: RESONANCE METHOD
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
ASTM D 5687/D5687M : 1995 : R2002 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
HH-G-156 Revision E:1993 GASKET MATERIAL, GENERAL PURPOSE, RUBBER SHEETS, STRIPS, AND SPECIAL SHAPES
MIL R 6855 : E RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES
MIL-W-22759 Revision E:1990 WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY
MIL-P-46121 Revision B:1977 ELASTIC SHEET AND COATING MATERIAL, PARA-XYLYLENE POLYMERS
MIL-I-50412 Base Document:1970 INITIATOR ASSEMBLY FOR PRIMER, ELECTRIC, XM91E1 AND XM117, PARTS FOR
IPC J STD 030 : A SELECTION AND APPLICATION OF BOARD LEVEL UNDERFILL MATERIALS
MIL-M-46891 Revision A:1980 MOLDING COMPOUND, PHENOLIC RESIN, ASBESTOS REINFORCED
MIL-P-63196 Revision A:1980 POLYURETHANE ELASTOMER BINDER (FOR USE IN AMMUNITION)
SAE AMS 3208 : 2014 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 45 - 55
SAE AMS 3670/3 : 2004 POLYAMIDE-IMIDE BAR, ROD, AND SHAPES, 12% GRAPHITE - 3% POLYTETRAFLUOROETHYLENE FILLED
MIL-C-24449 Revision A:1981 CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS AND FINISHED WINDOWS
I.S. EN ISO 14607:2009 NON-ACTIVE SURGICAL IMPLANTS - MAMMARY IMPLANTS - PARTICULAR REQUIREMENTS (ISO 14607:2018)
A-A-52047 Revision D:2013 Tubing, Nonmetallic (Rubber and Plastic)
MIL-DTL-5516 Revision D:2008 Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C)
ZZ-R-768 Revision B:2009 RUBBER FOR MOUNTINGS (UNBONDED-SPOOL AND COMPRESSION TYPES)
ASTM D 5687/D5687M :1995 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM D 276 : 2012 : REDLINE Standard Test Methods for Identification of Fibers in Textiles
ASTM D 3171 : 2015 : REDLINE Standard Test Methods for Constituent Content of Composite Materials
MIL-R-14328 Revision B:1975 RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS)
H-B-00681 Revision D:1968 BRUSHES, TYPEWRITER
ASTM F 1876 : 1998 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
ASTM F 624 : 2009 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
MIL-P-48395 Base Document:1975 PELLETS, EXPLOSIVE COMPOSITIONS (FOR USE IN AMMUNITION)
MIL-DTL-32124 Revision A:2006 PROPELLANT, NSWC/IH-BC-15, NSWC/IH-BC-16, NSWC/IH-BC-17, NSWC/IH-BC-20, NSWC/IH-BC-21 AND NSWC/IH-BC-22
MIL-I-24768 Base Document:1992 INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR
DOD-STD-35-120 Base Document:1978 AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, LENSES, FILTERS, AND MIRRORS (OPTICAL)
MIL-M-63457 Revision A:1987 MINE, ANTITANK, HE, BLU-91/B LOADING, ASSEMBLING AND PACKING
ASTM D 5990 : 2000 Standard Classification System for Polyketone Injection Molding and Extrusion Materials (PK) (Withdrawn 2007)
MIL-M-87176 Base Document:1982 MOLDING MATERIAL, POLYPROPYLENE, MODIFIED MECHANICAL USE ONLY
MIL-M-46862 Revision B:1992 MOLDING MATERIAL, GLASS, EPOXY IMPREGNATED
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
MIL-M-48261 Base Document:1977 MINE, M718/M741 SYSTEM, METAL PARTS
MIL-DTL-19379 Revision C:2013 Mounts, Resilient, Mare Island Types 11M15, 11M25, and 10M50
MIL-DTL-21649 Revision D:2017 MOUNT, RESILIENT, TYPE 5M10,000-H
MIL-PRF-62419 Revision B:2010 COMPOSITE MATERIALS FOR MILITARY VEHICLES
13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
ADS-13F-HDBK : 1997 AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES
ASTM D 3222 : 2005 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
ASTM D 7176 : 2006 : R2011 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM D 5448/D5448M : 2016 : REDLINE Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
ASTM D 5467/D5467M : 1997 : R2010 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
MIL M 19863 : D MOUNT, RESILIENT, TYPE 5B5.000H
MIL-B-29604 Base Document:1994 Body Armor, Hard, Small Arms Protective, PRU-61/P22P-15
L-P-504 Revision E:1991 PLASTIC SHEET AND FILM, CELLULOSE ACETATE
MIL-DTL-23053 Revision E:1996 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
MIL P 85548 : B PROPELLANT, COMPOSITE, CAST, N-60
MIL-A-47315 Revision A:1991 ADHESIVE, POLYURETHANE
MIL-L-60326 Base Document:1965 LUBRICANT, FLUOROCARBON TELOMER DISPERSION (FOR USE WITH AMMUNITION)
ASTM A 975 : 2011 : R2016 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
MIL-V-63118 Revision A:1978 VULCANIZED RUBBER OBTURATOR
SAE AMS 3205 : 2010 SYNTHETIC RUBBER, LOW-TEMPERATURE RESISTANT, 45-55
MIL-DTL-20268 Revision H:2017 FRAME, CAP
ASTM D 5205 : 2016 : REDLINE Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials
ASTM F 2820 : 2012 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications
ASTM E 1420 : 1991 Practice for Specifying Polymeric Materials for Service in Ionizing Radiation Environments (Withdrawn 1996)
MIL PRF 3100 : F WHEEL ASSEMBLIES, SOLID ELASTOMER TIRED; FOR TRACK LAYING VEHICLES
MIL G 1149 : C GASKET MATERIAL, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
ASTM D 3965 : 2016 : REDLINE Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
SAE AMS 3843 : 2014 POLYTETRAFLUOROETHYLENE SHEET, ASBESTOS FIBER REINFORCED, HIGH COMPRESSIBILITY, LOW DENSITY
SAE AMS 3306 : 2014 RUBBER, SILICONE 1200 PSI (8.27 MPA), HIGH MODULUS 55 - 65
API 15LE CHINESE : 2008 SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
SAE AMS 3867 : 2016 BORON FILAMENT TAPE, EPOXY-RESIN-IMPREGNATED
ASTM D 6484/D6484M : 2014 : REDLINE Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
SAE AS 5127/1 : 2014 AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS
ASTM D 6388 : 1999 : R2012 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
SAE AMS 3267 : 1992 SEALING COMPOUND, LOW ADHESION, CORROSION INHIBITING, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES
BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
SAE AMS 3849 : 2016 CLOTH, QUARTZ, STYLE 581 FABRIC - HOT MELT, ADDITION TYPE, POLYIMIDE RESIN IMPREGNATED
ASTM F 2848 : 2017 : REDLINE Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
UNE-EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
ASTM D 1562 : 2015 : REDLINE Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
SAE AMS 3647 : 2015 POLYFLUOROETHYLENE PROPYLENE FILM AND SHEET
ASTM F 1837M : 1997 : R2002 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
ASTM F 2968/F2968M : 2014 Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications
ASTM D 7194 : 2012 : REDLINE Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
ASTM C 297/C297M : 2016 : REDLINE Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
SAE AS 4897 : 1994 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE (PTFE), LOW PRESSURE, 450 DEGREES F AND FIREPROOF, PROCUREMENT SPECIFICATION FOR
ASTM D 707 : 2015 : REDLINE Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
CGSB 138.1 : 1996 CORR 1996 FABRIC FOR CHAIN LINK FENCE
ASTM D 3222 : 2005 : R2010 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
SAE AMS 3894 : 2016 Carbon Fiber Tape and Sheet Epoxy Resin Impregnated
ASTM F 665 : 2009 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application
ASTM F 602 : 2009 : R2015 Standard Criteria for Implantable Thermoset Epoxy Plastics
ASTM D 7273/D7273M : 2008 : R2013 : EDT 1 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM F 2854 : 2010 : R2016 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM D 5593 : 1999 : EDT 1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)
ASTM D 6645 : 2001 : R2010 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
ASTM F 648 : 2014 : REDLINE Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
ASTM D 7273 : 2008 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM D 4801 : 2008 : R2016 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
ASTM D 6455 : 2011 : R2018 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
ASTM F 1579 : 2002 : EDT 1 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications (Withdrawn 2011)
SAE AMS 3756 : 2011 MOLDINGS, GLASS FIBER FILLED POLYTETRAFLUOROETHYLENE (PTFE) 75% PTFE RESIN, 25% GLASS FIBERS, AS SINTERED
ASTM F 2905/F2905M : 2013 Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications
ASTM D 4242 : 2007 : R2017 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
ASTM F 2042 : 2000 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication
ASTM E 1783/E1783M : 1996 : R2017 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
EN ISO 14607:2018 Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018, Corrected version 2018-08)
GOST 849:2018 Primary nickel. SpecificationsE
BS EN ISO 13628-10:2006 Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
MIL-S-83318 Revision A:1991 SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
MIL-P-63238 Revision B:1986 PROJECTILE, 155MM, AT M718/M741 LOADING, ASSEMBLING AND PACKING OF
SAE AMS 3915 : 2015 ADVANCED COMPOSITES PREPREG - NOMINAL 250 DEGREES F CURE - GLASS FIBER AND EPOXY RESIN, 7781 WEAVE FABRIC
MIL-S-81256 Base Document:1965 SILICA FABRIC, PHENOLIC IMPREGNATED
SAE J 2028 : 2016 FRONT-WHEEL-DRIVE CONSTANT VELOCITY JOINT BOOT SEALS
MIL H 85800 : 0 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR
MIL-R-45906 Revision D:1984 RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK
L-P-392 Revision A:1964 PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION
MIL-PRF-15624 Revision H:2016 GASKET MATERIAL, RUBBER, 50 DUROMETER HARDNESS (MAXIMUM)
SAE AMS 3667 : 2011 Polytetrafluoroethylene (PTFE) Sheet, Molded General Purpose Grade, As Sintered
MIL-R-46198 Base Document:1988 RESIN, POLYIMIDE, HOT PRESSED OR PRESSED AND SINTERED
MIL-B-21408 Revision G:1984 BOOTS, SAFETY
ASTM D 6867 : 2003 : R2009 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
SAE AMS 3913 : 2014 RADOME, FOAM SANDWICH, HOT-MELT, ADDITION-TYPE POLYIMIDE
MIL H 83298 : A HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC
MIL-B-83277 Revision A:1975 BOOTS, FLYERS FWU-8/P
API 15LE : 2008(R2018) SPECIFICATION FOR POLYETHYLENE LINE PIPE (PE)
MIL P 008184 : D PLASTIC SHEET, ACRYLIC, MODIFIED
ASTM D 7745 : 2011 Standard Practice for Testing Pultruded Composites
MIL L 46197 : (1) LAMINATE: HIGH STRENGTH GLASS, FABRIC REINFORCED, POLYESTER RESIN PREIMPREGNATED
MIL-P-17549 Revision D:1981 PLASTIC LAMINATES, FIBROUS GLASS REINFORCED, MARINE STRUCTURAL
ASTM D 7472 : 2009 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
SAE J 517 : 2017 HYDRAULIC HOSE
ASTM D 1788 : 1981 Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics (Withdrawn 1988)
MIL-PRF-46103 Revision E:1998 ARMOR: LIGHTWEIGHT, COMPOSITE
CSA Z245.20 SERIES : 2014 PLANT-APPLIED EXTERNAL COATINGS FOR STEEL PIPE
ASTM F 1579 : 2002 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications
ASTM F 604 : 1994 Specification for Silicone Elastomers Used in Medical Applications (Withdrawn 2001)
MIL R 82791 : 0 RUBBER, SILICONE, RTV
MIL-R-24719 Base Document:1989 RESINS, VINYL ESTER, LOW PRESSURE LAMINATING
L-P-380 Revision C:1973 PLASTIC MOLDING MATERIAL METHACRYLATE
MIL-B-44314 Base Document:1987 BODY ARMOR, SMALL ARMS PROTECTIVE, AIRCREWMAN
ASTM F 2025 : 2006 : R2012 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
MIL M 21649 : C MOUNT, RESILIENT, TYPE 5M1O,OOO-H
ASTM F 2818:2010 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ASTM D 3294 : 2015 : REDLINE Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
ASTM E 1612 : 1994 : R2009 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM A 975 : 2011 Standard Specification for Double<span class='unicode'>–</span>Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
SAE AMS 3644 : 2016 PLASTIC: POLYIMIDE, FOR MOLDED ROD, BAR, AND TUBE, PLAQUE, AND FORMED PARTS
MIL-PRF-1149 Revision D:1998 GASKET MATERIALS, SYNTHETIC RUBBER, 50 AND 65 DUROMETER HARDNESS
MIL-A-48027 Revision A:1975 ADAPTER-BOOSTER, BOMB, NOSE, THERMALLY PROTECTED, M148E1, LOADING, ASSEMBLING AND PACKING
SAE MA 2007A : 2015 HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC
MIL-A-47040 Base Document:1974 ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE
MIL I 82736 : A IGNITION PELLETS, MAGNESIUM-FLUOROCARBON
15/30314236 DC : 0 BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
04/19975667 DC : 0 BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - SINGLE - USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANCE OXYGENATION
MIL DTL 85548 : C PROPELLANT, CAST COMPOSITE, N-60
07/30150249 DC : 0 BS EN ISO 23936-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
MIL-B-63454 Base Document:1982 BAND, ROTATING, NYLON GLASS FILLED PROJECTILE, 105 MM, M737 TDPS-T
MIL-P-63462 Base Document:1979 PLASTIC MOLDING AND EXTRUSION MATERIAL, ETHYL CELLULOSE, FOR ROCKET GRAIN INHIBITING MATERIALS
MIL-M-63304 Revision A:1987 MINE, ANTI-PERSONNEL: HE, M74 LOADING, ASSEMBLING AND PACKING
MIL C 882 : E CLOTH, DUCK, COTTON OR COTTON POLYESTER BLEND, SYNTHETIC RUBBER,IMPREGNATED, LAMINATED, OIL RESISTANT
MIL-R-8791 Revision D:1982 RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN
ASTM F 1837M : 1997 : R2007 Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
MIL-C-50062 Revision D:1964 CARRIER, FIELD PROTECTIVE MASK, M15
MIL-M-63456 Revision A:1988 MINE, ANTI-PERSONNEL: HE, BLU-92/B LOADING, ASSEMBLING AND PACKING
MIL-A-82842 Base Document:1983 ADHESIVE, CONDUCTIVE, LOW RESISTIVITY
ASTM D 4474 : 2000 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)
ASTM D 4635 : 2016 : REDLINE Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
MIL-DTL-45301 Revision E:1998 TREAD ELASTOMER: SOLID TIRE, FOR TRACK LAYING VEHICLES
MIL-DTL-83420 Revision P:2017 WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR
L-T-790 Revision B:1976 TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE)
ASTM F 2468 : 2005 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
MIL-PRF-6855 Revision F:2009 RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR
MIL-C-14505 Revision D:1983 CLOTH, NYLON, POLYCHLOROPRENE-COATED (FOR PNEUMATIC FLOATING EQUIPMENT)
MIL-P-46184 Base Document:1982 PLASTIC MOLDING & EXTRUSION MATERIAL, POLYETHERIMIDE (PEI)
L-P-389 Revision A:1964 PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION
SAE AS 5258 : 2012 INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR
ZZ-T-831 Revision D:1978 TUBING, RUBBER AND PLASTIC
ASTM A 974 : 1997 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
SAE AMS 2980/1 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
SAE AMS DTL 23053 : 1999 INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR
API 17U : 2015 RECOMMENDED PRACTICE FOR WET AND DRY THERMAL INSULATION OF SUBSEA FLOWLINES AND EQUIPMENT
A-A-56021 Base Document:1991 PLASTIC SHEET, POLYETHYLENE, TEREPHTHALATE (FOR CARTOGRAPHIC OPERATIONS)
ASTM F 624 : 2009 : R2015 : EDT 1 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
MIL-R-47211 Revision A:1989 RUBBER, SILICONE, ROOM TEMPERATURE CURING
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 CONDUIT, TUBING, AND CABLE FITTINGS
ASTM F 2025 : 2006 Standard Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
SAE AMS 3660 : 2011 POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS, GENERAL PURPOSE GRADE, AS SINTERED
SAE AMS 3661 : 2015 POLYTETRAFLUOROETHYLENE (PTFE) FILM, PREMIUM GRADE
SAE AMS 3914A : 2015 ADVANCED COMPOSITES PREPREG - NOMINAL 250 DEGREES F CURE - 12K TOW CARBON FIBER AND EPOXY RESIN, PLAIN WEAVE FABRIC
NACE SP 01 85 : 2007 EXTRUDED POLYOLEFIN RESIN COATING SYSTEMS WITH SOFT ADHESIVES FOR UNDERGROUND OR SUBMERGED PIPE
ASTM D 5961/D5961M : 2017 : REDLINE Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
ASTM D 706 : 2015 : REDLINE Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
ASTM F 790 : 2008 : R2013 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
SAE AMS 3207 : 2014 CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 25 - 35
SAE AMS3617F : 2014 POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS
ASTM D 7248/D7248M : 2012 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM E 1612/E1612M : 1994 : R2013 : EDT 1 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
ASTM F 2881/F2881M : 2018 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM D 6248 : 1998 : R2012 : EDT 1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry (Withdrawn 2021)
ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
ASTM F 1092 : 2014 : REDLINE Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
ASTM D 5577 : 1994 : R2010 : EDT 1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics (Withdrawn 2019)
ASTM D 6856 : 2003 Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
ASTM D 3981 : 2009 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
ASTM F 2953 : 2012 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
ASTM D 5687/D5687M : 1995 : R2007 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
ASTM F 2160 : 2016 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM D 1710 : 2015 : REDLINE Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
ASTM D 8033 : 2016 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
ASTM F 2896 : 2011 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids
ASTM D 6388 : 1999 : R2005 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
ASTM D 3369 : 2001 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)
ASTM F 3131 : 2014 Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
ASTM E 1783/E1783M : 1996 : R2013 : EDT 1 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
ASTM D 2447 : 2003 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
ASTM D 5514 : 2006 : R2011 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM D 7211 : 2013-05 SPECIFICATION FOR PARTS MACHINED FROM POLYCHLOROTRIFLUOROETHYLENE (PCTFE) AND INTENDED FOR GENERAL USE
ASTM D 6388:1999 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
ASTM D 6415/D6415M : 2006 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 6415/D6415M : 2006 : REV A : R2013 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
ASTM D 7774 : 2017 : REDLINE Standard Test Method for Flexural Fatigue Properties of Plastics
ASTM D 1675 : 2003 Standard Test Methods for Polytetrafluoroethylene Tubing
ASTM D 1895 : 2017 : REDLINE Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
ASTM D 7791 : 2017 : REDLINE Standard Test Method for Uniaxial Fatigue Properties of Plastics
ASME PVHO 1 : 2016 SAFETY STANDARD FOR PRESSURE VESSELS FOR HUMAN OCCUPANCY

ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 618 : 2013 : REDLINE Standard Practice for Conditioning Plastics for Testing
IEEE/ASTM SI_10-2010 American National Standard for Metric Practice
ASTM D 6436 : 2014 : REDLINE Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
ASTM E 12 : 1970 : R1991 : EDT 1 Terminology Relating to Density and Specific Gravity of Solids, Liquids, and Gases (Withdrawn 1996)

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.