ASTM D 7951 : 2018
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Specification for Disproportionation (TDP) Toluene
Hardcopy , PDF
02-13-2020
English
06-01-2018
1.1 This specification covers Disproportionation (TDP)toluene.1.2 The following applies to all specified limits in thisspecification: for purposes of determining conformance withthis specification, an observed value or a calculated value shallbe rounded off “to the nearest unit” in the last right-hand digitused in expressing the specification limit, in accordance withthe rounding-off method of Practice E29.1.3 The values stated in SI units are to be regarded asstandard. No other units of measurement are included in thisstandard.1.4 Consult current OSHA regulations, supplier’s SafetyData Sheets, and local regulations for all materials used in thisspecification.1.5 This standard does not purport to address all of thesafety concerns, if any, associated with its use. It is theresponsibility of the user of this standard to establish appropriatesafety, health, and environmental practices and determinethe applicability of regulatory limitations prior to use.1.6 This international standard was developed in accordancewith internationally recognized principles on standardizationestablished in the Decision on Principles for theDevelopment of International Standards, Guides and Recommendationsissued by the World Trade Organization TechnicalBarriers to Trade (TBT) Committee.
1.1This specification covers Disproportionation (TDP) toluene.
1.2The following applies to all specified limits in this specification: for purposes of determining conformance with this specification, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4Consult current OSHA regulations, supplier’s Safety Data Sheets, and local regulations for all materials used in this specification.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 16
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 4492 : 1998 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
| ASTM D 7183 : 2012 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7504 : 2009 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7504 : 2015 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7184 : 2013 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 2360 : 2007 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM D 7504 : 2015 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 4052 : 1996 : R2002 : EDT 1 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM E 2680 : 2016 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM D 7504 : 2016 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7360 : 2011 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration |
| ASTM D 3437 : 1999 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 4052 : 2018 : REV A | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 1209 : 2000 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 5386 : 2004 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 2360 : 2011 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography (Withdrawn 2016) |
| ASTM D 7504 : 2012 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7183 : 2016 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7184 : 2012 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 2360 : 2004 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM D 4052 : 2009 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 7183 : 2018 : REV A : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 6526 : 2010 | Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography |
| ASTM D 7183 : 2018 : REV A | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7183 : 2007 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 3437 : 2010 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 7184 : 2015 : R2019 : EDT 1 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM D 4492 : 2003 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
| ASTM E 2680 : 2009 : EDT 1 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM D 2360 : 2003 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM D 7504 : 2009 : EDT 1 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 6526 : 2012 | Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography (Withdrawn 2018) |
| ASTM D 4052 : 2011 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 4052 : 2016 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 7504 : 2011 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 2360 : 2004 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM D 6526 : 2000 | Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography |
| ASTM D 7504 : 2017 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7184 : 2015 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection |
| ASTM E 2680 : 2009 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM D 7183 : 2007 : EDT 1 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 1209 : 2005 : EDT 1 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 5386 : 2005 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 2360 : 2008 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM E 2680 : 2009 : R2015 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
| ASTM D 7504 : 2010 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 4492 : 2010 | Standard Test Method for Analysis of Benzene by Gas Chromatography (Withdrawn 2018) |
| ASTM D 3437 : 2011 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 4052 : 1996 | Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter |
| ASTM D 3437 : 2008 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 3437 : 2003 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 2360 : 2004 : REV A | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM D 5386 : 1993 : REV B : R2000 : EDT 1 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 3437 : 2015 | Standard Practice for Sampling and Handling Liquid Cyclic Products |
| ASTM D 6526 : 2003 : EDT 1 | Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography |
| ASTM D 1209 : 2005 : R2011 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 7360 : 2016 | Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration (Withdrawn 2023) |
| ASTM D 4492 : 2007 | Standard Test Method for Analysis of Benzene by Gas Chromatography |
| ASTM D 2360 : 2000 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography |
| ASTM D 1209 : 2005 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 4052 : 2015 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 7183 : 2018 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7183 : 2015 | Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence |
| ASTM D 7184 : 2007 | Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence |
| ASTM D 5386 : 2010 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 6526 : 2003 | Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography |
| ASTM D 4052 : 2018 | Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter |
| ASTM D 7504 : 2018 | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 7504 : 2017 : REV A | Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number |
| ASTM D 1209 : 2005 : R2019 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM E 2680 : 2009 : R2015 : EDT 1 | Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.