• There are no items in your cart

ASTM D 8 : 2020 : REV A

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Terminology Relating to Materials for Roads and Pavements
Available format(s)

Hardcopy , PDF

Superseded date

02-03-2021

Language(s)

English

Published date

09-11-2020

1.1This standard incorporates generic terms and generic definitions of terms specifically associated with road and paving materials. These generic terms and definitions are used within the standards developed by Committee D04 on Road and Paving Materials.

1.2Only terms that appear in more than one standard under the jurisdiction of Committee D04 will be included in Section 3 of Terminology D8. Terms that were historically part of this terminology but never appeared, or no longer appear, in more than one standard under the jurisdiction of Committee D04 are listed in Appendix X1. The terms in Appendix X1 are not maintained and updated by Subcommittee D04.91. The terms in Appendix X1 are available for reference purposes only. The terminology in Appendix X1 may not reflect current practices, standards, and technology used in materials for roads and pavements.

1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
D 04
DocumentType
Reference Material
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 7643 : 2016 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
ASTM D 5821 : 2013 : R2017 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D 6088 : 2006 : R2016 Standard Practice for Installation of Geocomposite Pavement Drains
ASTM D 692/D692M : 2020 Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures
ASTM D 6155 : 2019 Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures
ASTM D 7115 : 2020 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
ASTM D 4469 : 2017 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures
ASTM D 6816 : 2011 : R2016 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
ASTM D 242/D242M : 2019 Standard Specification for Mineral Filler for Asphalt Mixtures
ASTM D 6521 : 2019 : REV A Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
ASTM D 2321 : 2020 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D 8140 : 2018 Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
ASTM D 8237 : 2018 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures With the Four-Point Beam Fatigue Device
ASTM D 2940/D2940M : 2020 Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports
ASTM D 3625/D3625M : 2020 Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water
ASTM D 8239 : 2018 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
ASTM D 7870/D7870M : 2020 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
ASTM D 6752/D6752M : 2018 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D 1369 : 2019 Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments
ASTM D 6297 : 2020 Standard Specification for Asphaltic Plug Joints for Bridges
ASTM F 1668 : 2016 Standard Guide for Construction Procedures for Buried Plastic Pipe
ASTM D 8225 : 2019 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
ASTM D 5/D5M : 2020 Standard Test Method for Penetration of Bituminous Materials
ASTM D 3839 : 2014 : R2019 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ASTM E 867 : 2006 : R2020 Standard Terminology Relating to Vehicle-Pavement Systems
ASTM D 6626 : 2015 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
ASTM D 7227/D7227M : 2017 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
ASTM D 75/D75M : 2019 Standard Practice for Sampling Aggregates
ASTM D 546 : 2017 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures
ASTM D 3549/D3549M : 2018 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens
ASTM D 4223/D4223M : 2020 Standard Practices for Preparation of Test Specimens of Asphalt-Stabilized Soils
ASTM D 1754/D1754M : 2020 Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
ASTM D 2205 : 2020 Standard Guide for Selection of Tests for Traffic Paints
ASTM D 7172 : 2014 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Withdrawn 2022)
ASTM D 7063/D7063M : 2018 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
ASTM D 7229 : 2008 : R2013 : EDT 1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Withdrawn 2021)
ASTM D 243/D243M : 2020 Standard Test Method for Residue of Specified Penetration
ASTM D 6704 : 2008 : R2015 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D 6925 : 2015 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D 6703 : 2019 Standard Test Method for Automated Heithaus Titrimetry
ASTM D 5361/D5361M : 2016 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
ASTM D 7405 : 2020 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D 8038 : 2016 Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material
ASTM D 3666 : 2016 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D 5106 : 2015 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
ASTM D 4215 : 2007 : R2013 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
ASTM D 7369 : 2020 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
ASTM D 7313 : 2020 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
ASTM D 6373 : 2016 Standard Specification for Performance Graded Asphalt Binder
ASTM D 3628 : 2015 : R2021 Standard Practice for Selection and Use of Emulsified Asphalts
ASTM D 140/D140M : 2016 Standard Practice for Sampling Asphalt Materials
ASTM D 1139/D1139M : 2015 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
ASTM D 2170/D2170M : 2018 Standard Test Method for Kinematic Viscosity of Asphalts
ASTM D 448 : 2012 : R2017 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
ASTM D 2728 : 1998 : R2019 Standard Practice for Paving Uses and Application Temperatures for Road Tars (Withdrawn 2023)
ASTM D 2489/D2489M : 2016 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures
ASTM D 8021 : 2020 Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel
ASTM D 6926 : 2020 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM D 2419 : 2014 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
ASTM D 2171/D2171M : 2018 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D 2041/D2041M : 2019 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
ASTM D 1073 : 2016 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.