• There are no items in your cart

ASTM D 828 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
Available format(s)

Hardcopy , PDF

Superseded date

12-05-2016

Language(s)

English

Published date

11-01-2016

CONTAINED IN VOL. 15.09, 2016 Defines procedures for determining tensile properties of paper and paperboard.

1.1This test method covers procedures for determining tensile properties of paper and paperboard.

1.2The procedures given in this test method are for use with constant-rate-of-elongation tensile testing equipment and as such, are able to be used with instruments designed for either vertical or horizontal operation, and whether manually operated or computer controlled.

1.3These procedures are applicable for all types of paper, paperboard, paper products, and related materials within the measurement limitations of the equipment used. They are not for use with combined corrugated board.

1.4Properties able to be determined using this test method include tensile strength, stretch, tensile energy absorption, tensile stiffness, breaking length, and tensile index.

1.5The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
D 09
DocumentType
Test Method
Pages
8
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM D 5749 : 2017 : REDLINE Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
MIL-C-0051096 Revision E:1983 CORE MATERIAL, C18
ASTM D 3759/D3759M : 2005 Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
MIL-B-51097 Revision B:1964 BACKING MATERIAL, C18
MIL-B-0051097 Revision D:1976 BACKING MATERIAL, C18
ASTM D 5282 : 2005 Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
ASTM D 4987 : 1999 : R2008 Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper (Withdrawn 2010)
ASTM D 776 : 1992 : R1996 Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board
ASTM E 2556/E2556M : 2010 : R2016 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
ASTM D 6819 : 2002 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
ASTM D 619 : 2014 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D 5282 : 2005 : R2012 Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation
MIL-I-24683 Revision A:1990 INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER
DOD I 24683 : 1987 INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER
ASTM D 5802 : 1995 Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)
ASTM D 1677 : 2017 : REDLINE Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM B 900 : 2016 : REDLINE Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
ASTM D 528 : 1997 Standard Test Method for Machine Direction of Paper and Paperboard
CSA A220 SERIES : 2006 : INC : UPD 4 : 2010 : R2012 CONCRETE ROOF TILES
CSA A220 SERIES : 2006 : INC : UPD 4 : 2010 CONCRETE ROOF TILES
ASTM D 146 : 2004 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM D 2020 : 1992 : R2003 Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard (Withdrawn 2009)
ASTM D 3022 : 1984 : R1996 : EDT 1 Standard Test Method for Color and Strength of Color Pigments by Use of a Miniature Sandmill
ASTM D 1458 : 2013-12 TEST METHODS FOR FULLY CURED SILICONE RUBBER-COATED GLASS FABRIC AND TAPES FOR ELECTRICAL INSULATION
ASTM D 2020 : 1992 : R1999 Standard Test Methods for Mildew (Fungus) Resistance of Paper and Paperboard
ASTM D 6819 : 2002 : EDT 1 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
ASTM D 902 : 2012 : REDLINE Standard Test Methods for Flexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used for Electrical Insulation
ASTM D 4987 : 1999 Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
ASTM D 6819 : 2002 : EDT 3 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
TAPPI T 404 : 1992 TENSILE BREAKING STRENGTH AND ELONGATION OF PAPER AND PAPERBOARD (USING PENDULUM-TYPE TESTER)
ASTM D 4369 : 1992 Specification for Boxed Facial Tissue for Industrial and Institutional Use (Withdrawn 1999)
MIL F 62309 : B FILTER ELEMENT, AIR
ASTM D 6819 : 2002 : R2007 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus (Withdrawn 2011)
CCC-W-51 Revision D:1975 WADDING, COTTON, SURGICAL
ASTM E 1993 : 1998 : R2002 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
MIL-F-51481 Base Document:1981 FILTER MATERIAL, LAMINATED PAPER, TEN-PLY
ASTM C 921 : 2010 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
ASTM D 3905 : 1993 Standard Specification for Toilet Tissue for Industrial and Institutional Use (Withdrawn 2000)
ASTM C 921 : 2010 : R2015 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)
ASTM E 1993/E1993M : 1998 : R2013 : EDT 1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM E 154/E154M : 2008 : REV A : R2013 : EDT 1 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
ASTM E 2556/E2556M : 2010 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
ASTM D 4560 : 1992 Specification for Paper Napkins for Industrial and Institutional Use (Withdrawn 1999)
MIL-B-20467 Revision A:1974 BOXBOARD (FOR USE IN AMMUNITION)
ASTM D 528 : 1997 : R2007 Standard Test Method for Machine Direction of Paper and Paperboard (Withdrawn 2010)
MIL-F-51095 Revision B:1964 FILTER MATERIAL, GAS AEROSOL, C18R1
P-D-455 Revision D:1975 DISKS, ABRASIVE, ALUMINUM OXIDE
ASTM D 6819 : 2002 : EDT 2 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
HH-B-100 Revision B:1973 BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION)
ASTM E 1993 : 1998 : R2002 : EDT 1 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM D 4431 : 1992 Standard Specification for Paper Towels for Industrial and Institutional Use (Withdrawn 2000)
MIL-S-28600 Revision A:1976 SORBENTS, FLOATING (FOR OIL SPILL REMOVAL)
ASTM D 4987 : 1999 : R2003 Standard Test Method for Tensile Breaking Strength of Perforations in One-Part Continuous Forms Paper
CSA A220 SERIES : 2006 CONCRETE ROOF TILES
ASTM D 5802 : 1995 : R2001 Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) (Withdrawn 2009)
MIL-F-0051095 Revision F:1983 FILTER MATERIAL, GAS-AEROSOL, C18R1 2
A-A-1016 Revision C:1991 DISC, ABRASIVE (CLOTH AND FIBER)
ASTM D 3759/D3759M : 2005 : R2011 Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
ASTM D 528 : 1997 : R2002 Standard Test Method for Machine Direction of Paper and Paperboard
CSA A220 SERIES : 2006 : R2016 CONCRETE ROOF TILES
ASTM C 474 : 2015 : REDLINE Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
ASTM E 1993 : 1998 : R2008 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM C 1423 : 2016 : REDLINE Standard Guide for Selecting Jacketing Materials for Thermal Insulation
TAPPI T 561 : 0 SORPTIVE RATE AND CAPACITY OF BIBULOUS PAPER PRODUCTS USING GRAVIMETRIC PRINCIPLES
ASTM D 1968 : 2015 Standard Terminology Relating to Paper and Paper Products
ASTM E 1993 : 1998 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
ASTM D 776 : 1992 : R2001 Standard Test Method for Determination of Effect of Dry Heat on Properties of Paper and Board (Withdrawn 2009)
ASTM E 1745 : 2017 : REDLINE Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

ASTM E 122 : 2017 : REDLINE Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM D 585 : 1997 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D 685 : 2017 : REDLINE Standard Practice for Conditioning Paper and Paper Products for Testing

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.