ASTM D 832 : 2007 : R2018
Current
Current
The latest, up-to-date edition.
Standard Practice for Rubber Conditioning For Low Temperature Testing
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
06-01-2018
CONTAINED IN VOL. 09.01, 2015 Defines the characteristic mechanical behavior of rubbers at low temperatures, and outlines the conditioning procedure necessary for testing at these temperatures.
1.1This practice covers the characteristic mechanical behavior of rubbers at low temperatures, and outlines the conditioning procedure necessary for testing at these temperatures.
1.2One of the first stages in establishing a satisfactory technique for low temperature testing is the specification of the time and temperature of exposure of the test specimen. It has been demonstrated that any one or more of the following distinct changes, which are detailed in Table 1, may take place on lowering the test temperature:
1.2.1Simple temperature effects,
1.2.2Glass transitions, and
1.2.3First order transitions (crystallization), and solubility and other effects associated with plasticizers.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
D 11
|
| DocumentType |
Standard Practice
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
| MIL-STD-417 Revision A:1976 | CLASSIFICATION SYSTEM AND TESTS FOR SOLID ELASTOMERIC MATERIALS |
| SAE J 18 : 2002 | SPONGE AND EXPANDED CELLULAR RUBBER PRODUCTS |
| MIL-STD-670 Revision B:1968 | CLASSIFICATION SYSTEM AND TESTS FOR CELLULAR ELASTOMERIC MATERIALS |
| ASTM D 1229 : 2003 : R2015 | Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
| ASTM D 1053 : 1992 : REV A : R2007 | Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 4014 : 2003 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 3089 : 1997 : R2008 | Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes |
| ASTM D 3847 : 2001 : R2012 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
| ASTM D 3847 : 2001 : R2018 | Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures |
| ASTM D 3847 : 2001 | Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM D 4014 : 2003 : R2007 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| SAE AIR 1387 : 2016 | DESIGNING WITH ELASTOMERS FOR USE AT LOW TEMPERATURES, NEAR OR BELOW GLASS TRANSITION |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| ASTM D 1053 : 1992 : REV A : R2012 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 7121 : 2005 | Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum |
| ASTM D 746 : 2014 : REDLINE | Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact |
| ASTM D 1053 : 1992 : REV A : R2001 : EDT 1 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures Flexible Polymers and Coated Fabrics |
| ASTM D 1056 : 2014 : REDLINE | Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber |
| ASTM D 945 : 2016 : REDLINE | Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph) |
| ASTM D 7121 : 2005 : R2012 | Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum |
| SAE J 1085 : 2017 | TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS |
| ASTM D 1229 : 2003 | Standard Test Method for Rubber Property—Compression Set at Low Temperatures |
| ASTM D 4014 : 2003 : R2012 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 1229 : 2003 : R2008 | Standard Test Method for Rubber Property-Compression Set at Low Temperatures |
| ASTM D 1053 : 1992 : REV A : R1997 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 4014 : 2003 : R2018 | Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges |
| ASTM D 3847 : 2001 : R2007 | Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures |
| ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 471 : 2016 : REV A | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
| ASTM D 2136 : 2002 : R2007 | Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 2136 : 2019 : EDT 1 | Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
| ASTM D 1329 : 1988 : R1998 | Standard Test Method for Evaluating Rubber Property-Retraction at Lower Temperatures (TR Test) |
| ASTM D 2136 : 2002 : R2012 | Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
| ASTM D 1329 : 2008 | Standard Test Method for Evaluating Rubber Property<span class='unicode'>—</span>Retraction at Lower Temperatures (TR Test) |
| ASTM D 5964 : 2015 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
| ASTM D 5964 : 2016 : R2021 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
| ASTM D 2136 : 1994 : R1998 | Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
| ASTM D 5964 : 2007 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for<br> ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils |
| ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 5964 : 1996 | Standard Practice for Rubber IRM 902 and IRM 903 Replacement Oils for ASTM No. 2 and ASTM No. 3 Oils |
| ASTM D 5964 : 2007 : R2014 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils |
| ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 5964 : 2016 | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM D 471 : 2016 : REV A : R2021 | Standard Test Method for Rubber Property—Effect of Liquids |
| ASTM D 1053 : 1992 : REV A : R2012 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 2136 : 2002 : EDT 1 | Standard Test Method for Coated Fabrics-Low-Temperature Bend Test |
| ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 1053 : 1992 : REV A : R1997 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 2136 : 2002 | Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
| ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 5964 : 2016 : REDLINE | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
| ASTM D 1329 : 2002 | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 1329 : 2016 | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
| ASTM D 1053 : 1992 : REV A : R2001 : EDT 1 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures Flexible Polymers and Coated Fabrics |
| ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
| ASTM D 1329 : 2016 : REDLINE | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2015 : REDLINE | TERMINOLOGY RELATING TO RUBBER |
| ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
| ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
| ASTM D 1053 : 1992 : REV A : R2007 | Standard Test Methods for Rubber Property-Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
| ASTM D 1053 : 1992 : REV A : R2018 | Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics |
| ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
| ASTM D 1329 : 2016 : R2021 | Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test) |
| ASTM D 2136 : 2019 | Standard Test Method for Coated Fabrics—Low-Temperature Bend Test |
| ASTM D 5964 : 2015 : REV A | Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
| ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
US$55.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.