• There are no items in your cart

ASTM E 1209 : 2018

Current
Current

The latest, up-to-date edition.

Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

12-11-2018

This practice2 covers procedures for water-washable fluorescent penetrant testing of materials.

1.1This practice2 covers procedures for water-washable fluorescent penetrant testing of materials. It is a nondestructive testing method for detecting discontinuities that are open to the surface such as cracks, seams, laps, cold shuts, laminations, isolated porosity, through leaks, or lack of porosity and is applicable to in-process, final, and maintenance examination. It can be effectively used in the examination of nonporous, metallic materials, both ferrous and nonferrous, and of nonmetallic materials such as glazed or fully densified ceramics and certain nonporous plastics and glass.

1.2This practice also provides a reference:

1.2.1By which a fluorescent penetrant testing method using the water-washable process recommended or required by individual organizations can be reviewed to ascertain its applicability and completeness.

1.2.2For use in the preparation of process specifications dealing with the water-washable fluorescent penetrant examination of materials and parts. Agreement by the purchaser and the manufacturer regarding specific techniques is strongly recommended.

1.2.3For use in the organization of the facilities and personnel concerned with the liquid penetrant testing.

1.3This practice does not indicate or suggest standards for evaluation of the indications obtained. It should be pointed out, however, that indications must be interpreted or classified and then evaluated. For this purpose there must be a separate code or specification or a specific agreement to define the type, size, location, and direction of indications considered acceptable, and those considered unacceptable.

1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.5All areas of this document may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization (CEO).

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 07
DocumentType
Standard Practice
Pages
8
ProductNote
This standard refers to : ASTM D129 - 18
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 3022 : 2018 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
ASTM E 2297 : 2015 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E 2256 : 2019 Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
ASTM E 165/E165M : 2018 Standard Practice for Liquid Penetrant Testing for General Industry

ASTM E 1316 : 2022 : REV A Standard Terminology for Nondestructive Examinations
ASTM D 516 : 2016 Standard Test Method for Sulfate Ion in Water
ASTM D 129 : 2018 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)
ASTM D 1552 : 2003 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1219 : 2005 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
ASTM E 1316 : 2011 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 2297 : 2004 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E 1316 : 2015 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2009 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2008 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2020 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2017 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 433 : 1971 : R2023 Standard Reference Photographs for Liquid Penetrant Inspection
ASTM D 1552 : 2008 : R2014 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1316 : 2000 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 543 : 2021 Standard Specification for Agencies Performing Nondestructive Testing
ASTM D 1552 : 1990 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1316 : 2019 : REV A Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 2016 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)
ASTM E 1316 : 2014 Standard Terminology for Nondestructive Examinations
ASTM D 808 : 2016 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021)
ASTM E 1316 : 2013 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 Standard Terminology for Nondestructive Examinations
ASTM E 3022 : 2018 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
ASTM D 1552 : 2000 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1316 : 2011 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV A Standard Terminology for Nondestructive Examinations
ASTM D 516 : 2022 Standard Test Method for Sulfate Ion in Water
ASTM E 1316 : 2015 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 Standard Terminology for Nondestructive Examinations
ASTM E 433 : 1971 : R2018 Standard Reference Photographs for Liquid Penetrant Inspection
ASTM E 1316 : 2019 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2001 Standard Terminology for Nondestructive Examinations
ASTM E 165/E165M : 2023 Standard Practice for Liquid Penetrant Testing for General Industry
ASTM E 1219 : 2010 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM E 1316 : 2003 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 : REV A Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 2023 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM E 1316 : 2024 Standard Terminology for <?Pub Dtl?>Nondestructive Examinations
ASTM E 1316 : 2006 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 543 : 2015 Standard Specification for Agencies Performing Nondestructive Testing
ASTM E 1316 : 2016 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 : REV A Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM E 1316 : 2014 : EDT 1 Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 2007 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1219 : 2016 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM D 1552 : 1995 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM D 1552 : 2015 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection
ASTM D 1552 : 2001 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 2297 : 2015 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E 1316 : 2010 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2022 Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 2008 : R2014 : EDT 1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1316 : 2013 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1219 : 2021 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
ASTM E 1219 : 1999 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Solvent-Removable Process
ASTM E 1316 : 2017 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2009 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 2008 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1316 : 2004 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 3022 : 2015 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
ASTM D 1552 : 2016 : R2021 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)
ASTM E 1316 : 2021 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 2297 : 2023 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E 1316 : 2005 Standard Terminology for Nondestructive Testing
ASTM E 1316 : 2004 Standard Terminology for Nondestructive Examinations
ASTM D 1552 : 1983 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
ASTM E 1316 : 2021 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 Standard Terminology for Nondestructive Examinations
ASTM E 2297 : 2004 : R2010 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E 1316 : 2023 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2012 Standard Terminology for Nondestructive Examinations

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.