• There are no items in your cart

ASTM E 1411 : 2016

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Qualification of Radioscopic Systems
Available format(s)

Hardcopy , PDF

Superseded date

01-17-2024

Language(s)

English

Published date

07-11-2016

1.1This practice provides test and measurement details for measuring the performance of X-ray and gamma ray radioscopic systems. Radioscopic examination applications are diverse. Therefore, system configurations are also diverse and constantly changing as the technology advances.

1.2This practice is intended as a means of initially qualifying and re-qualifying a radioscopic system for a specified application by determining its performance level when operated in a static mode. System architecture including the means of radioscopic examination record archiving and the method for making the accept/reject decision are also unique system features and their effect upon system performance must be evaluated.

1.3The general principles, as stated in this practice, apply broadly to transmitted-beam penetrating radiation radioscopy systems. Other radioscopic systems, such as those employing neutrons and Compton back-scattered X-ray imaging techniques, are not covered as they may involve equipment and application details unique to such systems.

1.4The user of this practice shall note that energies higher than 320keV may require different methods than those described within this practice.

1.5Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
E 07
DocumentType
Standard Practice
Pages
12
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM E 1936 : 2015 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
ASTM E 1161 : 2009 : R2014 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
ASTM E 1647 : 2016 Standard Practice for Determining Contrast Sensitivity in Radiology
ASTM E 1742/E1742M : 2018 Standard Practice for Radiographic Examination
ASTM E 1255 : 2016 Standard Practice for Radioscopy
ASTM E 1416 : 2016 : REV A Standard Practice for Radioscopic Examination of Weldments
ASTM E 1734 : 2016 : REV A Standard Practice for Radioscopic Examination of Castings
ASTM E 1475 : 2013 : R2018 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data
ASTM E 1936 : 2020 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems
ASTM E 2533 : 2021 Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications
ASTM E 1161 : 2021 Standard Practice for Radiographic Examination of Semiconductors and Electronic Components
ASTM E 1734 : 2023 Standard Practice for Radioscopic Examination of Castings
ASTM E 1416 : 2023 Standard Practice for Radioscopic Examination of Weldments
ASTM E 1475 : 2013 : R2023 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

ASTM E 1316 : 2022 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 2022 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
ASTM E 1316 : 2011 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1255 : 2009 Standard Practice for Radioscopy
ASTM E 1025 : 2011 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E 1316 : 2009 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2008 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2698 : 2018 : EDT 1 Standard Practice for Radiographic Examination Using Digital Detector Arrays
ASTM E 1316 : 2010 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2020 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2017 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1647 : 2003 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E 2698 : 2010 Standard Practice for Radiological Examination Using Digital Detector Arrays
ASTM E 1316 : 2000 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1255 : 1996 Standard Practice for Radioscopy
ASTM E 1316 : 2019 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1165 : 2012 : R2017 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1316 : 2014 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 2698 : 2018 Standard Practice for Radiographic Examination Using Digital Detector Arrays
ASTM E 1316 : 2018 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2011 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 Standard Terminology for Nondestructive Examinations
ASTM E 1165:2012 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1316 : 2019 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1025 : 2018 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography
ASTM E 1316 : 2013 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 1998 Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E 1316 : 2001 Standard Terminology for Nondestructive Examinations
ASTM E 1165 : 1992 : R1996 : EDT 1 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1316 : 2003 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1647 : 2009 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E 1316 : 2006 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 1998 : R2003 : EDT 1 Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E 2903 : 2018 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
ASTM E 2002 : 1998 : R2009 Standard Practice for Determining Total Image Unsharpness in Radiology
ASTM E 1316 : 2021 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2014 : EDT 1 Standard Terminology for Nondestructive Examinations
ASTM E 1025 : 2005 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E 1316 : 2010 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2022 Standard Terminology for Nondestructive Examinations
ASTM E 1165 : 2020 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1316 : 2013 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1025 : 1998 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
ASTM E 1316 : 2017 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2903 : 2013 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes
ASTM E 1316 : 2016 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1647 : 1998 : REV A Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E 1316 : 2009 Standard Terminology for Nondestructive Examinations
ASTM E 1647 : 2016 Standard Practice for Determining Contrast Sensitivity in Radiology
ASTM E 1316 : 2002 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2004 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 2002 : 2015 Standard Practice for Determining Total Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy
ASTM E 1316 : 2023 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1165 : 1992 : R2002 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1316 : 2021 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1165 : 2004 : R2010 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1647 : 2016 : R2022 Standard Practice for Determining Contrast Sensitivity in Radiology
ASTM E 1316 : 2005 Standard Terminology for Nondestructive Testing
ASTM E 1316 : 2004 Standard Terminology for Nondestructive Examinations
ASTM E 1165 : 2004 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
ASTM E 1316 : 2021 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1255 : 2016 Standard Practice for Radioscopy
ASTM E 1316 : 2012 Standard Terminology for Nondestructive Examinations

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.