• There are no items in your cart

ASTM E 1660 : 1995 : REV A : R2018

Current
Current

The latest, up-to-date edition.

Standard Classification for Serviceability of an Office Facility for Support for Office Work
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

03-01-2018

CONTAINED IN VOL. 04.11, 2018 Defines pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for performance to support typical office work.

1.1This classification covers pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for performance to support typical office work.

1.2Within that aspect of serviceability, each pair of scales, shown in Fig. 1 through Fig. 6, are for classifying one topic of serviceability. Each paragraph in an Occupant Requirement Scale (see Fig. 1 through Fig. 6) summarizes one level of serviceability on that topic, which occupants might require. The matching entry in the Facility Rating Scale (see Fig. 1 through Fig. 6) is a translation of the requirement into a description of certain features of a facility which, taken in combination, indicate that the facility is likely to meet that level of required serviceability.

FIG. 1 Scale A.1.1 for Photocopying

 Scale A.1.1 for Photocopying Scale A.1.1 for Photocopying

FIG. 1Scale A.1.1 for Photocopying (continued)

Scale A.1.1 for PhotocopyingScale A.1.1 for Photocopying

FIG. 1Scale A.1.1 for Photocopying (continued)

Scale A.1.1 for Photocopying Scale A.1.1 for Photocopying

FIG. 2Scale A.1.2 for Training Rooms, General

Scale A.1.2 for Training Rooms, GeneralScale A.1.2 for Training Rooms, General

FIG. 2Scale A.1.2 for Training Rooms, General (continued)

Scale A.1.2 for Training Rooms, GeneralScale A.1.2 for Training Rooms, General

FIG. 2Scale A.1.2 for Training Rooms, General (continued)

Scale A.1.2 for Training Rooms, GeneralScale A.1.2 for Training Rooms, General

FIG. 3Scale A.1.3 for Training Rooms for Computer Skills

Scale A.1.3 for Training Rooms for Computer SkillsScale A.1.3 for Training Rooms for Computer Skills

FIG. 3Scale A.1.3 for Training Rooms for Computer Skills (continued)

Scale A.1.3 for Training Rooms for Computer SkillsScale A.1.3 for Training Rooms for Computer Skills

FIG. 4Scale A.1.4 for Interview Rooms

Scale A.1.4 for Interview RoomsScale A.1.4 for Interview Rooms

FIG. 4Scale A.1.4 for Interview Rooms (continued)

Scale A.1.4 for Interview RoomsScale A.1.4 for Interview Rooms

FIG. 5Scale A.1.5 for Storage and Floor Loading

Scale A.1.5 for Storage and Floor LoadingScale A.1.5 for Storage and Floor Loading

FIG. 5Scale A.1.5 for Storage and Floor Loading (continued)

Scale A.1.5 for Storage and Floor LoadingScale A.1.5 for Storage and Floor Loading

FIG. 6Scale A.1.6 for Shipping and Receiving

Scale A.1.6 for Shipping and ReceivingScale A.1.6 for Shipping and Receiving

FIG. 6Scale A.1.6 for Shipping and Receiving (continued)

Scale A.1.6 for Shipping and Receiving Scale A.1.6 for Shipping and Receiving

1.3The entries in the Facility Rating Scale (see Fig. 1 through Fig. 6) are indicative and not comprehensive. They are for quick scanning to estimate approximately, quickly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, or evaluating how an office facility is performing.

1.4This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared.

1.5This classification indicates what would cause a facility to be rated at a certain level of serviceability but does not state how to conduct a serviceability rating nor how to assign a serviceability score. That information is found in Practice E1334. The scales in this classification are complimentary to and compatible with Practice E1334. Each requires the other.

1.6The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6.1Exception—Inch-pound units are used in Fig. 6.

1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 06
DocumentType
Standard
Pages
16
ProductNote
Reconfirmed 2018
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM E 1700 : 2016 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope<rangeref></rangeref >
ASTM E 1765 : 2016 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes

ASTM E 631 : 2015 : REDLINE Standard Terminology of Building Constructions
ASTM E 1679 : 2013 : R2019 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
ISO 6240:1980 Performance standards in building Contents and presentation
ASTM E 1679 : 1995 : R2012 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
ASHRAE 62 : 2001 VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY
ASTM E 1679 : 1995 : R1999 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
ASTM E 1679 : 1995 : R2005 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
ASTM E 1334 : 1995 : R2005 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
ASHRAE 55 : 2017 THERMAL ENVIRONMENTAL CONDITIONS FOR HUMAN OCCUPANCY
ASTM E 1679 : 2013 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
ASTM E 1679 : 2013 : REDLINE Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed
ASTM E 1334 : 1995 : R1999 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility

View more information
US$69.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.