• There are no items in your cart

ASTM E 2203 : 2014 : R2018

Current
Current

The latest, up-to-date edition.

Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

08-01-2018

CONTAINED IN VOL. 04.12, 2014 Defines products composed of dense thermoplastic elastomers that are fabricated into gaskets and accessories (such as compression seals, setting blocks, spacers, and shims) for use in sealing and glazing applications in building construction.

1.1This specification describes products composed of dense thermoplastic elastomers that are fabricated into gaskets and accessories (such as compression seals, setting blocks, spacers, and shims) for use in sealing and glazing applications in building construction. These products are used to seal or serve as components of compression sealing systems between mechanically restrained surfaces in building construction.

1.2The values stated in metric (SI) units are to be regarded as the standard. The inch-pound values given in parentheses are provided for information purposes only.

1.3Test Method C1166, as referenced in this specification, should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment that takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
C 24
DocumentType
Standard
Pages
8
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

ASTM C 1401 : 2014 Standard Guide for Structural Sealant Glazing
ASTM C 1401 : 2014 : REDLINE Standard Guide for Structural Sealant Glazing
CSA A440 : 2017 NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS
A500-16 Building guards

ASTM D 2000 : 2003 : REV A : EDT 1 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1566 : 2004 : REV A Standard Terminology Relating to Rubber
ASTM D 2000 : 2001 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 2240 : 2000 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 3182 : 2015 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 471 : 2016 : REV A Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 1566 : 2009 Standard Terminology Relating to Rubber
ASTM D 2137 : 2011 : R2018 Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 1566 : 2006 Standard Terminology Relating to Rubber
ASTM D 1566 : 2008 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2021 : REV A Standard Terminology Relating to Rubber
ASTM D 1149 : 2016 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2137 : 1994 : R2000 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 3182 : 2007 : R2012 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2005 Standard Terminology Relating to Rubber
ASTM D 1566 : 2002 : REV A Standard Terminology Relating to Rubber
ASTM C 1087 : 2023 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 2000 : 2000 : EDT 1 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 2000 : 2003 : REV A Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1149 : 2016-02 TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT
ASTM D 1566 : 2007 Standard Terminology Relating to Rubber
ASTM D 3182 : 1989 : R2006 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2019 Standard Terminology Relating to Rubber
ASTM D 2240 : 2004 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2015 Standard Terminology Relating to Rubber
ASTM C 1087 : 2000 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1166:2006 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D 1566 : 2008 Standard Terminology Relating to Rubber
ASTM D 1149 : 2015 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 3182 : 1989 : R2001 : EDT 1 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2005 : REV A Standard Terminology Relating to Rubber
ASTM D 412 : 2016 : EDT 1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D 1149 : 2007 Standard Test Methods for Rubber Deterioration-Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2004 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2006 : REV A Standard Terminology Relating to Rubber
ASTM D 1566 : 2003 : REV A Standard Terminology Relating to Rubber
ASTM D 471 : 2016 : REV A : R2021 Standard Test Method for Rubber Property—Effect of Liquids
ASTM D 1566 : 2006 : REV B Standard Terminology Relating to Rubber
ASTM C 1166 : 2000 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D 2000 : 2008 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 2000 : 2006 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 412 : 2016 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 2137 : 2010 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 1566 : 2005 : REV B Standard Terminology Relating to Rubber
ASTM D 2000 : 2006 : REV A Standard Classification System for Rubber Products in Automotive Applications
ASTM C 1166 : 2021 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D 1149 : 2018 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 3182 : 2007 Standard Practice for Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2011 Standard Terminology Relating to Rubber
ASTM D 2137 : 2005 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 3182 : 2016 : REDLINE Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2240 : 2015 : R2021 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2000 : 2005 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1566 : 2021 Standard Terminology Relating to Rubber
ASTM D 2000 : 2018 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1566 : 2000 : REV B Standard Terminology Relating to Rubber
ASTM D 2240 : 2002 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 865 : 2011 Standard Test Method for Rubber<char: emdash>Deterioration by Heating in Air (Test Tube Enclosure)
ASTM C 1087 : 2016 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 2000 : 2006 : REV A : EDT 1 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1566 : 2014 Standard Terminology Relating to Rubber
ASTM C 1166 : 2006 : R2016 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D 2240 : 2015 Standard Test Method for Rubber Property—Durometer Hardness
ASTM C 1087 : 2000 : R2011 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 2000 : 2012 : R2017 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1149 : 2007 : R2012 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
ASTM D 2240 : 2003 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1149 : 1978 : REV A Standard Test Method for Rubber Deterioration - Surface Ozone Cracking In A Chamber ( Flat Specimen)
ASTM D 1566 : 2010 Standard Terminology Relating to Rubber
ASTM D 2240 : 2002 : REV B Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 3182 : 1989 : R2001 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM C 1087 : 2016 : REDLINE Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 2240 : 2015 : EDT 1 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 1566 : 2003 Standard Terminology Relating to Rubber
ASTM D 412 : 2016 : R2021 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D 3182 : 2021 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2000 Standard Terminology Relating to Rubber
ASTM D 2240 : 2005 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2000 : 2004 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 3182 : 1989 : R1994 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2015 : REDLINE TERMINOLOGY RELATING TO RUBBER
ASTM D 2240 : 2005 : R2010 Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 925 : 2014 : REDLINE Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
ASTM D 1566 : 2020 Standard Terminology Relating to Rubber
ASTM C 1166 : 2006 : R2011 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM D 3182 : 2016 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2007 : REV A Standard Terminology Relating to Rubber
ASTM C 1087 : 2000 : R2006 : EDT 1 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM C 1087 : 2000 : R2006 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
ASTM D 471 : 2016-02 TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS
ASTM D 3182 : 2021 : REV A Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 1566 : 2005 : REV C Standard Terminology Relating to Rubber
ASTM D 2240 : 2002 : REV A Standard Test Method for Rubber Property—Durometer Hardness
ASTM D 2000 : 2012 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 2000 : 2003 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 2000 : 2000 Standard Classification System for Rubber Products in Automotive Applications
ASTM D 1566 : 2010 : EDT 1 Standard Terminology Relating to Rubber
ASTM D 1149 : 1999 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
ASTM D 746 : 2014 : REDLINE Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D 3182 : 2015 : REV A Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D 2137 : 2011 Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics
ASTM D 1566 : 2008 : REV B Standard Terminology Relating to Rubber

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.