• There are no items in your cart

ASTM E 340 : 2015 : REDLINE

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Practice for Macroetching Metals and Alloys
Available format(s)

PDF

Superseded date

11-25-2023

Language(s)

English

Published date

07-23-2015

CONTAINED IN VOL. 03.01, 2015 Specifies the methods of macroetching metals and alloys to reveal their macrostructure.

1.1These procedures describe the methods of macroetching metals and alloys to reveal their macrostructure.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see 6.2, 7.1, 8.1.3, 8.2.1, 8.8.3, 8.10.1.1, and 8.13.2.

Committee
E 04
DocumentType
Redline
Pages
11
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM A 608/A608M : 2014 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
SAE AS 7460 : 2017 BOLTS AND SCREWS, TITANIUM ALLOY, 6.0AL-4.0V, PROCUREMENT SPECIFICATION FOR
SAE USCAR 8-2 : 2007 **DUPLICATE RECORD**
API SPEC 5CRA : 2010 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
08/30176215 DC : DRAFT JAN 2008 BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
MIL-F-71131 Base Document:1992 FIN, MORTAR CARTRIDGE: M32
NACE TM 04 98 : 2014 EVALUATION OF THE CARBURIZATION OF ALLOY TUBES USED FOR ETHYLENE MANUFACTURE
ASTM A 983/A983M : 2006 : R2011 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
MIL-F-48076 Revision A:1984 FIN, ASSEMBLY, M158
API 20A : 2017 CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY
ASTM A 988/A988M : 2017 : REDLINE Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
QQ N 00286 : F NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500)
MIL-STD-1895 Revision B:1998 RADIOGRAPHIC REFERENCE STANDARDS AND RADIOGRAPHIC PROCEDURES FOR PARTIAL-PENETRATION ALUMINUM WELDS
ASTM A 983/A983M : 2006 : R2016 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
AWS D3.6M : 2010 UNDERWATER WELDING CODE
AWS C1.1M/C1.1 : 2012 RECOMMENDED PRACTICES FOR RESISTANCE WELDING
SAE AS 7471 : 2018 BOLTS AND SCREWS, NICKEL ALLOY, UNS N07001 TENSILE STRENGTH 165 KSI, CORROSION AND HEAT RESISTANT, PROCUREMENT SPECIFICATION
ASTM F 541 : 2012 : REDLINE Standard Specification for Alloy Steel Eyebolts
SAE AMS 5643 : 2018 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
ASTM A 983/A983M : 2006 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
I.S. EN 14870-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
MIL-DTL-18295 Revision F:1998 CHAINS AND FITTINGS FOR FLEET MOORING
MIL P 71038 : 0
MIL C 18295 : E CHAIN AND FITTINGS FOR FLEET MOORINGS
ASTM E 1077 : 2014 : REDLINE Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
ASTM A 872/A872M : 2014 : REDLINE Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
MIL-F-14888 Revision A:1981 FIN ASSEMBLY, XM170
SAE MA 1784 : 2012 SPACERS AND WASHERS, PROCUREMENT SPECIFICATION FOR, METRIC
MIL-S-48084 Revision A:1981 STRIKER NUT ASSEMBLY FOR 4.2 INCH AMMUNITION
SAE USCAR 8-3 : 2013 **DUPLICATE RECORD**
AWWA C303 : 2017 CONCRETE PRESSURE PIPE, BAR-WRAPPED, STEEL-CYLINDER TYPE
ISO 15590-1:2009 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends
ASTM F 788 : 2013-04 SPECIFICATION FOR SURFACE DISCONTINUITIES OF BOLTS, SCREWS, AND STUDS, INCH AND METRIC SERIES
ASTM A 521 : 2003 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
UNI EN 14870-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
MIL-S-46119 Revision C:1988 Steel Forgings, Tubular Parts for Cannon
ASTM E 1180 : 2008 : R2014 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
API 5CRA : 2010 : INC : ERR 1 : 2011 : R2015 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
MIL-S-11310 Revision E:1976 Steel Bars, Carbon, Hot Rolled, For Cold Shaping Including Cold Extrusion
MIL-HDBK-1941 Base Document:1998 METAL-ARC WELDING OF HOMOGENEOUS ARMOR
SAE USCAR 8 : REV 3 - 2013 GRAIN FLOW PATTERN FOR BOLTS, SCREWS, AND STUDS
MIL F 71037 : NOTICE 2 FIN ASSEMBLY, MORTAR CARTRIDGE
API 5CRA : 2010 : INC : ERR 1 : 2011 SPECIFICATION FOR CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
AWWA C220 : 2017 STAINLESS-STEEL PIPE, 1/2 IN. (13 MM) AND LARGER
B339-14 Cylinders, spheres, and tubes for the transportation of dangerous goods
ASTM A 521/A521M : 2006 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
ASTM A 781/A781M : 2018-02 SPECIFICATION FOR CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE
ASTM E 2014 : 2017 : REDLINE Standard Guide on Metallographic Laboratory Safety
UNI EN ISO 13680 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
EN ISO 13680:2010 Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2010)
EN 14870-1:2011 Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified)
SAE AMS 5612 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 12CR, FERRITE CONTROLLED, ANNEALED
MIL-STD-1894 Revision B:1998 RADIOGRAPHIC REFERENCE STANDARDS AND RADIOGRAPHIC PROCEDURES FOR PARTIAL-PENETRATION STEEL WELDS
14/30286808 DC : 0 BS ISO 4969 - STEEL - ETCHING METHOD FOR MACROSCOPIC EXAMINATION
MIL-DTL-32261 Base Document:2007 CASE CARTRIDGE, 105 MM, M14 AND M217
MIL-R-10185 Revision E:1992 RING, BREECH, STEEL FORGINGS FOR
ASTM E 1180 : 2008 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation
SAE AMS S 11310 : 1998 STEEL BARS, CARBON, HOT ROLLED, FOR COLD SHAPING, INCLUDING COLD EXTRUSION
ASTM A 983/A983M : 2006 : R2011 : EDT 1 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
ASTM A 880 : 1995 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys (Withdrawn 2004)
ASTM A 766/A766M : 1987 Specification for Forgings
16/30336547 DC : 0 BS EN 16602-70-39 - SPACE PRODUCT ASSURANCE - PART 70-39: WELDING OF METALLIC MATERIALS FOR FLIGHT HARDWARE
SAE AMS 4313 : 2016 ALUMINUM ALLOY, ROLLED OR FORGED RINGS, 6.3CU - 0.30MN - 0.18ZR - 0.10V - 0.06TI (2219-T351, 2219-T352) SOLUTION HEAT TREATED AND MECHANICALLY STRESS RELIEVED
SAE AS 7461 : 2015 BOLTS AND SCREWS, TITANIUM ALLOY, 6AL-4V, UNS R56400, FATIGUE-RATED, PROCUREMENT SPECIFICATION FOR
ANSI/AWWA C200 : 2017 STEEL WATER PIPE, 6 IN. (150 MM) AND LARGER
ASTM E 381 : 2017 : REDLINE Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
ASTM F 3160 : 2016 Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants
ASTM A 521/A521M : 2006 : R2016 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use (Withdrawn 2018)
ASTM A 608/A608M : 2014 : R2018 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
BS EN ISO 13680:2010 Petroleum and natural gas industries. Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
ISO 13680:2010 Petroleum and natural gas industries Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock Technical delivery conditions
BS EN 14870-1:2011 Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Induction bends
ASTM A 989/A989M : 2018 : REDLINE Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
DOD-C-24676 Base Document:1987 COPPER-NICKEL ALLOY BAR, ROD AND FORGED SHAPES, HIGH STRENGTH (METRIC)
MIL-S-10520 Revision D:1975 STEEL, FORGING, FOR PROJECTILE STOCK
17/30358601 DC : 0 BS ISO 15590-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 1: INDUCTION BENDS
API 591 : 2014 PROCESS VALVE QUALIFICATION PROCEDURE
MIL-S-46172 Revision A:1984 STEEL FORGINGS
API 5CRA CHINESE : 2011 SPECIFICATION FOR CORROSION RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK
MIL-T-24766 Base Document:1992 TITANIUM FORGINGS & FORGING STOCK, HIGH QUALITY FOR SHIPS SERVICE
SAE AS 7101 : 2007 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) GENERAL REQUIREMENTS FOR MATERIALS TEST LABORATORY ACCREDITATION PROGRAM
ISO 4969:2015 Steel Etching method for macroscopic examination
ASTM A 778/A778M : 2016 : REDLINE Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM A 521/A521M : 2006 : R2011 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

ASTM E 381 : 2017 : REDLINE Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

View more information
US$83.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.