ASTM E 350 : 2012-09
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
TEST METHODS FOR CHEMICAL ANALYSIS OF CARBON STEEL, LOW-ALLOY STEEL, SILICON ELECTRICAL STEEL, INGOT IRON, AND WROUGHT IRON
Superseded date
07-02-2020
Published date
09-01-2012
CONTAINED IN VOL. 03.05, 2018 Specifies the chemical analysis of carbon steels, low-alloy steels, silicon electrical steels, ingot iron, and wrought iron having chemical compositions.
| Committee |
E 01
|
| DevelopmentNote |
Supersedes ASTM E 38 (12/2001)
|
| DocumentType |
Redline
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE AMS 7713 : 2016 | IRON, ELECTRICAL, BAR AND STRIP, COLD FINISHED, ANNEALED |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| MIL-S-62470 Base Document:1983 | STEEL, CHROME NICKEL MOLYBDENUM, 8620 BARS, FORGING AND TUBING BEARING QUALITY, VACUUM DEGASSED |
| SAE AMS6450K : 2017 | STEEL, SPRING WIRE 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) ANNEALED AND COLD DRAWN |
| SAE AMS 5022 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 0.14 - 0.20C (SAE 1117) |
| SAE AMS 6260S : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.07 - 0.13C) (9310) |
| AWS A5.28/A5.28M : 2005 : R2015 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING |
| SAE AMS 6263 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.2NI - 0.12MO (0.11 - 0.17C) (9315) |
| SAE AMS 6356 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO - (0.30 - 0.35C) (4132) |
| SAE AMS 6350 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 5070 : 2016 | STEEL, BARS AND FORGINGS, 0.18 - 0.23C (SAE 1022) |
| SAE AMS 5112 : 2013 | CARBON STEEL, WIRE, SPRING QUALITY MUSIC WIRE 0.70 - 1.00C COLD DRAWN |
| SAE AMS 5115 : 2017 | Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered |
| ASTM A 518/A518M : 1999 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| SAE AMS 6370 : 2016 | STEEL, BARS, FORGINGS, AND RINGS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 5032 : 2013 | WIRE, STEEL, 0.18-0.23C (SAE 1020), ANNEALED |
| SAE AMS 5044 : 2013 | STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM, HALF HARD TEMPER |
| SAE AMS 6330 : 2017 | STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 1.25NI (0.33 - 0.38C) |
| SAE AMS 6351 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPHEROIDIZED |
| AWS A5.2 : 92(R1997) | SPECIFICATIONS FOR CARBON AND LOW ALLOY STEEL RODS FOR OXYFUEL GAS WELDING |
| SAE MAM 6304 : 1994 | LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
| SAE ARP 4926 : 2011 | ALLOY VERIFICATION AND CHEMICAL COMPOSITION INSPECTION OF WELDING WIRE |
| SAE AMS 5034 : 2015 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS6328N : 2017 | STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.25MO (0.48 TO 0.53C) (SAE 8750) |
| SAE AMS 6461L:2001(S2016) | STEEL, WELDING WIRE 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6434 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
| SAE AMS 6433 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) |
| SAE AMS 6274 : 2016 | STEEL BARS, FORGINGS AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620) |
| ASTM A 532/A532M : 2010 | Standard Specification for Abrasion-Resistant Cast Irons |
| ASTM D 3724 : 2001 : R2007 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
| SAE AMS 6257 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.44C), CONSUMABLE ELECTRODE VACUUM REMELTED, NORMALIZED AND TEMPERED |
| SAE AMS5122K : 2003(S2017) | STEEL STRIP (0.90 - 1.04C) (SAE 1095) HARD TEMPER |
| MIL-A-46099 Revision C:1987 | ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE) |
| SAE AMS 5075 : 2015 | STEEL TUBING, SEAMLESS, 0.22 - 0.28C (SAE 1025), COLD DRAWN AND STRESS RELIEVED |
| SAE AMS 6361 : 2014 | STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) 125 KSI (862 MPA) TENSILE STRENGTH |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
| SAE AMS 6282 : 2015 | STEEL TUBING, MECHANICAL, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (SAE 8735) |
| SAE AMS 5010 : 2014 | STEEL BARS FREE-MACHINING COLD DRAWN (SAE 1212 OR SAE 1215) |
| SAE AMS 5024 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
| ASTM E 701 : 1980 : R1999 | Standard Test Methods for Municipal Ferrous Scrap |
| AWS A5.23/A5.23M : 2011 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| SAE AMS 6528 : 2017 | STEEL, BARS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED |
| AWS A5.20/A5.20M : 2005 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| SAE AMS 6443 : 1988 | STEEL BARS, FORGINGS, AND TUBING - 1.0CR (0.98-1.10C) (SAE 51100) CONSUMABLE ELECTRODE VACUUM MELTED |
| ASTM B 599 : 1992 : R2009 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| SAE AMS 5035 : 2014 | STEEL, WELDING WIRE, 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C) |
| ASTM E 2093 : 2012 | Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
| SAE AMS 6472 : 2014 | STEEL, BARS AND FORGINGS, NITRIDING 1.6CR - 0.35MO - 1.1AL (0.38 - 0.43C) (135 MOD) HARDENED AND TEMPERED, 112 KSI (772 MPA) TENSILE STRENGTH |
| ASTM C 983 : 1991 | Test Methods for Chemical and Instrumental Analysis of Metallic Core Components in Liquid Metal Fast-Breeder Reactors (LMFBR) (Withdrawn 1996) |
| ASTM A 713 : 2004 : R2017 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| ASTM B 599 : 1992 : R2014 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM B 599 : 1992 : R2003 : EDT 1 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| ASTM E 1282 : 2011 : R2016 | Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| SAE AMS 5029 : 2013 | STEEL, WELDING WIRE, 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| ASTM E 1724 : 1995 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| ASTM E 352 : 2013-05 | TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS |
| SAE AMS 6267J: 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6280 : 2017 | STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) |
| SAE AMS 6412 : 2015 | STEEL, BARS AND FORGINGS 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337) |
| SAE AMS 6378 : 2014 | STEEL BARS, 1.0CR - 0.20MO - 0.45SE (0.39 - 0.48C) (4142H MODIFIED), DIE-DRAWN, 130 KSI (896 MPA) YIELD STRENGTH, FREE MACHINING |
| SAE AMS 6396 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) ANNEALED |
| ASTM D 3724 : 2001 : R2012 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
| SAE AMS 6413 : 2016 | STEEL, MECHANICAL TUBING 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (4337) |
| ASTM E 1077 : 2014 : REDLINE | Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens |
| ASTM A 861 : 2004 : R2008 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| SAE AMS 6459 : 2012 | STEEL, WELDING WIRE, 1.0CR - 1.0MO - 0.12V (0.18 - 0.23C), VACUUM MELTED |
| BS ISO 20378 : 2017 | WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON-ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| SAE AMS 6455 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.22V (0.48 - 0.53C) (SAE 6150) |
| SAE AMS 5085 : 2017 | STEEL SHEET, STRIP, AND PLATE, 0.48 - 0.55C (SAE 1050) |
| ASTM G 81 : 1997 : REV A : R2013 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| SAE AMS 6427 : 2014 | STEEL BARS, FORGINGS, AND TUBING, 0.88CR - 1.8NI - 0.42MO - 0.08V (0.25 - 0.33C) (4330 MOD) |
| SAE AMS 5121 : 2015 | SHEET AND STRIP, STEEL (0.90 - 1.04C) (SAE 1095) ANNEALED |
| SAE AMS 6407 : 2017 | STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 2.0NI - 0.45MO (0.27 - 0.33C) |
| ASTM F 3042 : 2013 | Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws |
| SAE AMS 6468 : 2013 | STEEL, WELDING WIRE, 1.0CR - 10NI - 3.8CO - 0.45MO - 0.08V (0.14 - 0.17C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6447 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 1.4CR (0.93-1.05C) (SAE 52100), ELECTROSLAG REMELTED |
| SAE AMS 6431 : 2017 | STEEL, BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.11V (0.45 - 0.50C) (D6AC), VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6432 : 1973 | STEEL BARS, FORGINGS, AND TUBING, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.43-0.49C) |
| AWS A5.29 : 1998 | SPECIFICATION FOR LOW ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| SAE AMS 6300 : 2015 | STEEL BARS AND FORGINGS, 0.25MO (0.35 - 0.40C) (SAE 4037) |
| SAE AMS 5110 : 2016 | CARBON STEEL, WIRE AND SPRINGS, 0.75 - 0.88C (SAE 1080), SPRING TEMPER, COLD DRAWN |
| SAE AMS 5050 : 2015 | STEEL TUBING, SEAMLESS, 0.15 CARBON, MAXIMUM ANNEALED |
| SAE AMS 6457E : 2017 | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6359 : 2015 | STEEL, SHEET, STRIP, AND PLATE 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 5045 : 2015 | STEEL, SHEET AND STRIP, 0.25 CARBON, MAXIMUM HARD TEMPER |
| SAE AMS 6494 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C) AIRCRAFT-QUALITY |
| ASTM B 599 : 1992 : R1997 | Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip |
| SAE AMS 6417 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.38 - 0.43C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| ASTM A 518/A518M : 1999 : R2003 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM E 701 : 1980 : R2018 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM E 30 : 1989 | Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron (Withdrawn 1995) |
| ASTM A 713 : 2004 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| SAE AMS 6264 : 2014 | STEEL, CARBURIZING GRADE, BARS, FORGINGS, AND TUBING 1.2CR - 3.2NI - 0.12MO (0.14 - 0.20C) (9317) |
| SAE AMS 6340 : 2014 | STEEL BARS, FORGINGS, AND TUBING 0.88CR - 1.8NI - 0.42MO - 0.08V (0.28 - 0.33C) (4330 MOD) CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6524 : 1991 | STEEL, SHEET, STRIP, AND PLATE 1.0CR - 7.5NI - 4.5CO - 1.0MO - 0.09V (0.29 - 0.34C) CONSUMABLE ELECTRODE MELTED, ANNEALED |
| ASTM A 518/A518M : 1999 : R2012 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM E 415 : 2017 : REDLINE | Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry |
| ASME PV CODE 2C : 2017 | BOILER AND PRESSURE VESSEL CODE - MATERIALS - SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS |
| ASTM A 518/A518M : 1999 : R2008 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| SAE AMS 5047G : 2007(S2017) | STEEL, SHEET AND STRIP, 0.08 - 0.13C, ALUMINUM KILLED (SAE 1010), DEEP FORMING GRADE |
| SAE AMS 6444 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), PREMIUM AIRCRAFT-QUALITY, CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS S 6758 : 2017 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| SAE AMS 6451 : 2015 | STEEL, SPRING WIRE, 1.4SI - 0.65CR (0.51 - 0.59C) (SAE 9254) OIL TEMPERED |
| SAE AMS5061H:2009(R2017) | STEEL, LOW CARBON BARS, AND WIRE, 0.08 - 0.20 |
| ASTM E 31 : 1985 : R1989 | Methods for Chemical Analysis of Ferroalloys (Withdrawn 1995) |
| AWS A5.1M/A5.1 : 2012 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| BS EN 62321-5:2014 | Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASTM E 1724 : 1995 : R2001 | Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials (Withdrawn 2010) |
| SAE AMS 6278 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 4.1CR - 3.4NI - 4.2MO - 1.2V (0.11 - 0.15C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6327L : 2017 | STEEL BARS AND FORGINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH (COMPOSITION SIMILAR TO UNS G87400) |
| SAE AMS 6497 : 2013 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
| SAE MAM 6415 : 1998 | STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 6409E : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) SPECIAL AIRCRAFT QUALITY CLEANLINESS, NORMALIZED AND TEMPERED |
| SAE AMS 6304 : 2016 | LOW-ALLOY STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C) |
| SAE AMS 5040 : 2015 | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade |
| SAE AMS 6320 : 2017 | STEEL BARS, FORGINGS, AND RINGS 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735) |
| SAE AMS 5060 : 2003(S2016) | STEEL, BARS, FORGINGS AND TUBING 0.13 - 0.18C (SAE 1015) |
| AGMA 2004 : C | GEAR MATERIALS, HEAT TREATMENT AND PROCESSING MANUAL |
| AWS A5.28/A5.28M : 2005 : INC : ERR 1 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING |
| MIL-P-70997 Base Document:1991 | PROJECTILE, 81MM, HE, M821E1/M889E1 BODY ASSEMBLY |
| MIL U 46045 : D | URANIUM ALLOY, WROUGHT, BARS, BILLETS, AND TUBULAR SHAPES |
| SAE AMS 6323 : 2017 | STEEL, MECHANICAL TUBING 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
| SAE AMS 6456 : 2017 | STEEL, WELDING WIRE, 0.80CR - 1.8NI - 0.25MO (0.35 - 0.40C) (SAE 4340 MOD), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 5082 : 2012 | STEEL TUBING, SEAMLESS, 0.31 - 0.38C (SAE 1035), STRESS RELIEVED |
| SAE AMS 6477 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 0.80CR (0.90 - 1.03C), FOR BEARING APPLICATIONS |
| SAE AMS5030K:2003(S2017) | Steel, Welding Wire 0.06 Carbon, Maximum(STABILIZED Aug 2017)<br> |
| SAE AMS 5338 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.35 - 0.45C) (4140 MOD), NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS 7304 : 2015 | SPRINGS, STEEL, 0.85 - 1.05C, HARDENED AND TEMPERED AFTER FORMING |
| SAE AMS 5046 : 2017 | CARBON STEEL, SHEET, STRIP, AND PLATE, (SAE 1020 AND 1025) |
| SAE AMS 6358 : 2016 | STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
| SAE AMS 6375 : 2016 | STEEL, WELDING WIRE, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6453 : 2012(S2018) | STEEL, WELDING WIRE, 0.30CR - 1.8NI - 0.40MO - (0.23 - 0.28C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6509A : 2017 | STEEL BARS AND FORGINGS 3.5CR - 7.5NI - 16.3CO - 1.75MO - 0.2W - (0.09 - 0.13C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED |
| SAE AMS 6385 : 2015 | STEEL SHEET, STRIP, AND PLATE, LOW ALLOY, HEAT-RESISTANT, 0.65SI - 1.25CR - 0.50MO - 0.25V (0.27 - 0.33C) |
| SAE AMS 6386 : 2016 | STEEL SHEET AND PLATE LOW ALLOY, HEAT TREATED 90,000 PSI (621 MPA) AND 100,000 PSI (690 MPA) YIELD STRENGTH |
| SAE AMS 6292 : 2014 | STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.15 - 0.20C) (SAE 4617) |
| ASTM E 1473 : 2016 : REDLINE | Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys |
| SAE AMS 5069 : 2001(S2016) | STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
| SAE AMS 6324 : 2014 | STEEL BARS, FORGINGS, AND TUBING, 0.65CR - 0.70NI - 0.25MO (0.38 - 0.43C) (8740 MODIFIED) |
| SAE AMS 6415 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) |
| SAE AMS 5036 : 2015 | STEEL SHEET AND STRIP, ALUMINUM COATED, LOW CARBON |
| SAE AMS 6490 : 2014 | STEEL BARS, FORGINGS, AND TUBING 4.0CR - 4.2MO - 1.0V (0.77 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6381 : 2017 | STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) |
| SAE AMS 6414 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 5120 : 2013 | STEEL STRIP, 0.68 - 0.80C (SAE 1074) |
| SAE AMS 6529 : 2017 | STEEL, BARS, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140), SPECIAL AIRCRAFT-QUALITY CLEANLINESS, NORMALIZED |
| SAE AMS 6270 : 2014 | STEEL, BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.13 - 0.18C) (SAE 8615) |
| SAE AMS 6452E : 2012(S2017) | STEEL, WELDING WIRE, 0.95CR - 0.20MO (0.38 - 0.43C), VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6277 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), VACUUM ARC OR ELECTROSLAG REMELTED |
| SAE AMS 6365 : 2014 | STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135), NORMALIZED OR STRESS RELIEVED |
| ASTM G 81 : 1997 : REV A : R2002 : EDT 1 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| SAE AMS 6281 : 2015 | STEEL, MECHANICAL TUBING, 0.50CR - 0.55NI - 0.20MO (0.28 - 0.33C) (SAE 8630) |
| SAE AMS 6479 : 2015 | STEEL, BARS, FORGINGS, AND TUBING 1.45CR (0.93-1.05C) (SAE 52100) SPECIAL AIRCRAFT-QUALITY CLEANLINESS |
| SAE AMS 6255F : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.1SI - 1.45CR - 1.0MO - 0.08AL (0.16 - 0.22C), DOUBLE VACUUM MELTED |
| ASTM G 81 : 1997 : REV A | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| ISO 20378:2017 | Welding consumables — Rods for gas welding of non-alloy and creep-resisting steels — Classification |
| SAE AMS 6439 : 2016 | STEEL SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.42 - 0.48C) (D6AC), CONSUMABLE ELECTRODE VACUUM MELTED, ANNEALED |
| ASTM A 861 : 2004 : R2013 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| SAE AMS 6276 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.50CR - 0.55NI - 0.20MO (0.18 - 0.23C) (SAE 8620), CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6429 : 2014 | STEEL BARS, FORGINGS, TUBING, AND RINGS 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6374 : 2016 | STEEL TUBING, SEAM-FREE, ROUND, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), 95.0 KSI (655 MPA) TENSILE STRENGTH |
| AGMA 923 : B | METALLURGICAL SPECIFICATIONS OF STEEL GEARING |
| SAE AMS 5027 : 2012 | WELDING WIRE 1.05CR - 0.55NI - 1.0MO - 0.08V (0.26 - 0.32C) VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| SAE AMS 6482 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.5SI - 1.25CR - 3.8NI - 0.50MO - 0.30V (0.40C) VACUUM REMELTED, ANNEALED |
| SAE AMS 6294 : 2014 | STEEL BARS AND FORGINGS, CARBURIZING 1.8NI - 0.25MO (0.17 - 0.22C) (SAE 4620) |
| SAE AMS 6499 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 2.7SI - 0.85CR - 1.8NI - 0.4MO - 0.2V - (0.37 - 0.44C), DOUBLE VACUUM MELTED |
| SAE AMS 6493 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C), ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED, PREMIUM AIRCRAFT-QUALITY |
| SAE AMS 5028 : 2013 | STEEL, WELDING WIRE, 1.05CR - 0.55NI - 1.0MO - 0.07V (0.34 - 0.40C) (D6AC), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| AWS A5.5/A5.5M : 2014 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| SAE AMS 6421 : 2016 | STEEL BARS, FORGINGS, AND TUBING 0.80CR - 0.85NI - 0.20MO - 0.003B (0.35 - 0.40C) (MODIFIED 98B37) |
| MIL-S-8503 Revision B:1978 | STEEL BARS, CHROME-VANADIUM (6150) AIRCRAFT QUALITY |
| SAE AMS 6496 : 2013 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C) AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
| SAE AMS 6484 : 2016 | STEEL, BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.38 - 0.43C) (SAE 4340) NORMALIZED AND TEMPERED |
| SAE AMS 6372 : 2017 | STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.33 - 0.38C) (SAE 4135) |
| SAE AMS 6460 : 2015 | WIRE, STEEL WELDING, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C) |
| SAE AMS 6382 : 2014 | STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED |
| SAE AMS5062J:2004(S2017) | STEEL, LOW CARBON, BARS, FORGINGS, TUBING, SHEET, STRIP, AND PLATE, 0.25 CARBON, MAXIMUM |
| SAE AMS 6492 : 2013 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 3.25NI - 0.40MO (0.17 - 0.22C) AIRCRAFT QUALITY |
| ASTM E 701 : 1980 : R2005 | Standard Test Methods for Municipal Ferrous Scrap |
| SAE AMS 6317K : 2017 | STEEL BARS AND FORGINGS, 1.8NI - 0.25MO (0.38 - 0.43C) (4640), HEAT TREATED, 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS5328E:1987(S2017) | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.28 - 0.36C) (SAE 4330 MODIFIED), ANNEALED |
| ASTM E 701 : 1980 : R2010 | Standard Test Methods for Municipal Ferrous Scrap |
| SAE AMS 6438 : 2001(S2016) | STEEL, SHEET, STRIP, AND PLATE, 1.05CR - 0.55NI - 1.0MO - 0.12V (0.45 - 0.50C) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6362 : 2014 | STEEL TUBING, SEAMLESS, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), 150 KSI (1034 MPA) TENSILE STRENGTH |
| SAE AMS 6312 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.8NI - 0.25MO (0.38 - 0.43C) (4640) |
| SAE AMS 6272 : 2014 | STEEL BARS, FORGINGS, AND TUBING 0.50CR - 0.55NI - 0.20MO (0.15 - 0.20C) (SAE 8617) |
| SAE AMS 6423 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 0.92CR - 0.75NI - 0.52MO - 0.003B - 0.04V (MODIFIED 98BV40) |
| SAE AMS 6517A : 2015 | STEEL, BARS, AND FORGINGS, 3.5CR - 9.5NI - 18CO - 1.1MO (0.13 - 0.17C) DOUBLE VACUUM MELTED, NORMALIZED, ANNEALED |
| SAE AMS 5334 : 2013 | STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.20MO (0.25 - 0.35C) (SAE 8630 MOD), NORMALIZED AND TEMPERED |
| SAE AMS 6354 : 2016 | STEEL, SHEET, STRIP, AND PLATE, 0.75SI - 0.62CR - 0.20MO - 0.10ZR (0.10 - 0.17C) |
| SAE AMS 6325 : 2015 | STEEL, BARS, AND FORGINGS 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) HEAT TREATED, 105 KSI (724 MPA) TENSILE STRENGTH |
| SAE AMS 6426 : 1990(S2016) | STEEL BARS, FORGINGS, AND TUBING, 0.75SI - 1.0CR - 0.58MO (0.80 - 0.90C), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AS 7225 : 2015 | RIVETS, CARBON STEEL, PROCUREMENT SPECIFICATION FOR |
| SAE AMS 6419 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.6SI - 0.82CR - 1.8NI - 0.40MO - 0.08V (0.40 - 0.45C), CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6470 : 2014 | STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) |
| SAE AMS 6469 : 2016 | STEEL, WELDING WIRE, 1.75MN - 0.78CR - 2.8NI - 0.85MO - (0.09 - 0.12C), VACUUM MELTED, ENVIRONMENT-CONTROLLED PACKAGING |
| ASTM A 691 : 1998 : R2002 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| SAE AMS 6250 : 2015 | STEEL BARS, FORGINGS, AND TUBING, 1.5CR - 3.5NI (0.07 - 0.13C) (3310) |
| SAE AMS 6437 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11) |
| SAE AMS 6373 : 2016 | STEEL, WELDED TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| AWS A5.1 : 91(R1999) | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR SHIELDED METAL ARC WELDING |
| SAE AMS 5330 : 2015 | STEEL CASTINGS, INVESTMENT, 0.80CR - 1.8NI - 0.35MO (0.38 - 0.46C) (SAE 4340 MODIFIED), ANNEALED |
| SAE AMS 6305 : 2016 | STEEL, HEAT-RESISTANT, BARS, FORGINGS, AND TUBING, 0.95CR - 0.55MO - 0.30V (0.40 - 0.50C), VACUUM ARC REMELTED |
| SAE AMS 6424 : 2017 | STEEL BARS, FORGINGS, AND TUBING 0.80CR - 1.8NI - 0.25MO (0.49 - 0.55C) |
| ASTM A 691 : 1998 : R2007 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| SAE AMS 6435 : 2017 | STEEL, SHEET, STRIP, AND PLATE, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.33 - 0.38C) (4335 MOD), VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
| ASTM E 2093 : 2012 : R2016 | Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization |
| ASTM A 583 : 1993 : R1999 | Standard Specification for Cast Steel Wheels for Railway Service (Withdrawn 2004) |
| SAE AMS6481D:2017 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 3CR - 1MO - 0.2V - (0.29 - 0.36C), PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| ASTM E 38 : 1985 | Methods for Chemical Analysis of Nickel-Chromium and Nickel-Chromium-Iron Alloys (Withdrawn 1989) |
| SAE AS 7240 : 2015 | WASHERS, SPRING LOCK, CARBON STEEL, PROCUREMENT SPECIFICATION FOR |
| ASTM E 322 : 2012 : REDLINE | Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry |
| SAE AMS 5333 : 2017 | STEEL, INVESTMENT CASTINGS, 0.50CR - 0.55NI - 0.25MO (0.11 - 0.17C) (SAE 8615), NORMALIZED |
| ASTM A 532/A532M : 2010 : R2014 | Standard Specification for Abrasion-Resistant Cast Irons |
| SAE AMS 6299 : 2014 | STEEL BARS, FORGINGS, AND TUBING, CARBURIZING, 0.50CR - 1.8NI - 0.25MO (0.17 - 0.23C) (SAE 4320H) |
| SAE AMS 6462 : 2016 | STEEL, WELDING WIRE, 0.95CR - 0.20V (0.28 - 0.33C) (SAE 6130) |
| SAE AMS 6430J : 2017 | STEEL, BARS, FORGINGS, TUBING, AND RINGS, 0.75MN - 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C), (4335 MODIFIED) |
| SAE AMS 6498 : 2013 | STEEL BARS, FORGINGS, AND TUBING, NITRIDING, 1.4CR - 1.2MO - 0.3V (0.29 - 0.36C), DOUBLE VACUUM MELTED, PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS |
| SAE AMS 6342 K:1990(S2015) | STEEL BARS, FORGINGS, AND TUBING, 0.80CR - 1.0NI - 0.25MO (0.38 - 0.43C) (SAE 9840) |
| MIL-S-8690 Revision B:1978 | STEEL, CHROME NICKEL MOLYBDENUM 8620, BARS AIRCRAFT QUALITY |
| SAE AMS 5080 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
| SAE AMS 5042N : 2003(S2017) | STEEL, SHEET AND STRIP, 0.15 CARBON, MAXIMUM FORMING GRADE |
| SAE AMS 5336 : 2017 | STEEL, INVESTMENT CASTINGS, 0.95CR - 0.20MO (0.25 - 0.35C) (4130 MOD) NORMALIZED OR NORMALIZED AND TEMPERED |
| SAE AMS 7817 : 1978 | MOLYBDENUM ALLOY SHEET, STRIP, AND PLATE, 0.48TI - 0.090ZR - 0.02C, ARC CAST, STRESS RELIEVED |
| SAE AMS 6473 : 2006 | STEEL WELDING WIRE 0.88CR - 1.8NI - 1.6CO - 0.42MO - 0.08V (0.28 - 0.33C) (SAE 4330V) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6425 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.4MN - 1.5SI - 0.30CR - 1.8NI - 0.40MO (0.23 - 0.28C), CONSUMABLE ELECTRODE VACUUM MELTED |
| ASTM A 713 : 2004 : R2010 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components |
| SAE AMS 6395 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) |
| NFL 06 835 : 2007 | AEROSPACE SERIES - METALLIC PARTS - INDUCEMENT COMPRESSIVE SURFACE STRESSES - STEEL SHOT CUT WIRE (SPHERICAL) |
| ASTM G 81 : 1997 : REV A : R2007 | Standard Test Method for Jaw Crusher Gouging Abrasion Test |
| AWS A5.17/A5.17M : 1997 | SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING |
| ASTM D 3724 : 2001 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
| MIL-DTL-15119 Revision B:2012 | Tubing, Round, Seamless Alloy Steel |
| 16/30323181 DC : 0 | BS ISO 20378 - WELDING CONSUMABLES - RODS FOR GAS WELDING OF NON ALLOY AND CREEP-RESISTING STEELS - CLASSIFICATION |
| ASTM A 518M : 1992 | SPECIFICATION FOR CORROSION-RESISTANT HIGH-SILICON IRON CASTINGS (METRIC) |
| ASTM A 518/A518M : 1999 : R2018 | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| SAE AMS 6491 : 2014 | STEEL BARS, FORGINGS, AND TUBING 4.1CR - 4.2MO - 1.0V (0.80 - 0.85C) (M-50) PREMIUM AIRCRAFT-QUALITY FOR BEARING APPLICATIONS, DOUBLE VACUUM MELTED |
| SAE AMS 6495 : 2016 | STEEL BARS, FORGINGS, AND TUBING, 1.0CR - 2.50NI - 2.0MO - 1.10SI (0.10 - 0.20C), PREMIUM AIRCRAFT-QUALITY, ELECTROSLAG REMELTED OR CONSUMABLE ELECTRODE VACUUM REMELTED |
| SAE AMS 6357 : 2015 | STEEL SHEET, STRIP, AND PLATE, 0.50CR - 0.55NI - 0.25MO (0.33 - 0.38C) (8735) |
| SAE AMS 6322 : 2014 | STEEL BARS, FORGINGS, AND RINGS, 0.50CR - 0.55NI - 0.25MO (0.38 - 0.43C) (SAE 8740) |
| SAE AMS 6265 : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 1.2CR - 3.25NI - 0.12MO (0.07 - 0.13C) (9310), VACUUM CONSUMABLE ELECTRODE REMELTED |
| SAE AMS 6349 : 2017 | STEEL BARS, 0.95CR - 0.20MO (0.38 TO 0.43C) (SAE 4140), NORMALIZED |
| SAE AMS7301J:2003(S2017) | Steel, Highly-Stressed Springs 0.95Cr - 0.20V (0.48 - 0.53C) (SAE 6150) Case Hardened(STABILIZED Aug 2017) |
| SAE AMS 6487 : 2016 | STEEL, BARS, AND FORGINGS, 5.0CR - 1.3MO - 0.50V (0.38 - 0.43C) (H-11), CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 5031 : 1989(S2017) | WELDING ELECTRODES, COVERED, STEEL - 0.07 - 0.15C |
| AWS A5.25 : 1991 | SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES AND FLUXES FOR ELECTROSLAG WELDING |
| SAE AMS 6442 : 1987 | STEEL BARS AND FORGINGS 0.50Cr (0.98-1.10C) (SAE 50100) FOR BEARING APPLICATIONS |
| SAE AMS 6428 : 2014 | STEEL, BARS, FORGINGS, AND TUBING 0.78CR - 1.8NI - 0.35MO - 0.20V (0.32 - 0.38C) (4335 MOD) |
| SAE AMS 5132L : 2017 | STEEL, BARS, 0.90 - 1.03C |
| SAE AMS 6440 : 2015 | STEEL, BARS, FORGINGS, AND TUBING, 1.45CR (0.93 - 1.05C) (SAE 52100), FOR BEARING APPLICATIONS |
| SAE AMS 7819 : 2013 | MOLYBDENUM ALLOY BARS, 0.48TI - 0.90ZR - 0.02C, ARC CAST, STRESS RELIEVED |
| SAE AMS 6523H : 2017 | STEEL, SHEET, STRIP, AND PLATE, 0.75CR - 9.0NI - 4.5CO - 1.0MO - 0.09V (0.17 - 0.23C) VACUUM CONSUMABLE ELECTRODE MELTED, ANNEALED |
| AWS A5.26 : 1991 | SPECIFICATION FOR CARBON AND LOW ALLOY STEEL ELECTRODES FOR ELECTROGAS WELDING |
| AWS A5.29/A5.29M : 2010 | SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| CSA A3000 : 2013 | CEMENTITIOUS MATERIALS COMPENDIUM |
| AWS A5.20 : 1995 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| I.S. EN 62321-5:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
| AWS A5.20/A5.20M : 2005 : R2015 | SPECIFICATION FOR CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
| SAE AMS 6371L : 2017 | STEEL, MECHANICAL TUBING, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130) |
| SAE AMS 6471 : 2014 | STEEL, NITRIDING, BARS, FORGINGS, AND TUBING 1.6CR - 0.35MO - 1.13AL (0.38 - 0.43C) (135 MOD) CONSUMABLE ELECTRODE VACUUM MELTED |
| SAE AMS 6458 : 2016 | STEEL, WELDING WIRE 0.65SI - 1.25CR - 0.50MO - 0.30V (0.28 - 0.33C) VACUUM MELTED, ENVIRONMENT CONTROLLED PACKAGING |
| SAE AMS 6345 : 2015 | STEEL, SHEET, STRIP, AND PLATE, 0.95CR - 0.20MO (0.28 - 0.33C) (SAE 4130), NORMALIZED OR OTHERWISE HEAT TREATED |
| ASTM A 861 :2004 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ASTM A 691 : 1998 | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures |
| SAE AMS 6422K : 2016 | STEEL, BARS, FORGINGS, AND TUBING, 0.80CR - 0.85NI - 0.20MO - 0.003B - 0.04V (0.38 - 0.43C) (MODIFIED 98BV40) |
| ASTM E 1282 : 2011 | Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials |
| ASTM A 861 : 2004 : R2017 | Standard Specification for High-Silicon Iron Pipe and Fittings |
| EN 62321-5:2014 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASME Y14.46 : 2017 | PRODUCT DEFINITION FOR ADDITIVE MANUFACTURING |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM E 353 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys |
| ASTM E 1601 : 2012 : REDLINE | Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method |
| ISO 5725:1986 | Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests |
| ASTM E 173 : 1993 | Practice for Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals (Withdrawn 1997) |
| ASTM E 352 : 2013-05 | TEST METHODS FOR CHEMICAL ANALYSIS OF TOOL STEELS AND OTHER SIMILAR MEDIUM-AND HIGH-ALLOY STEELS |
| ASTM E 354 : 2014 : REDLINE | Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.