• There are no items in your cart

ASTM E 499/E499M : 2011 : R2017

Current
Current

The latest, up-to-date edition.

Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

06-01-2017

CONTAINED IN VOL. 03.03, 2017 Defines procedures for testing and locating the sources of gas leaking at the rate of 1 * 10[-7] Pa m[3]/s (1 * 10[-8] Std cm[3]/s)[3] or greater.

1.1This practice covers procedures for testing and locating the sources of gas leaking at the rate of 1 × 10 −7 Pa m3/s (1 × 10−8 Std cm3/s)3 or greater. The test may be conducted on any device or component across which a pressure differential of helium or other suitable tracer gas may be created, and on which the effluent side of the leak to be tested is accessible for probing with the mass spectrometer sampling probe.

1.2Two test methods are described:

1.2.1Test Method A—Direct probing, and

1.2.2Test Method B—Accumulation.

1.3Units—The values stated in either SI or std-cc/sec units are to be regarded separately as standard. The values stated in each system may not be exact equivalents: therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Committee
E 07
DevelopmentNote
Supersedes ASTM E 499. (07/2011)
DocumentType
Standard Practice
Pages
6
ProductNote
Reconfirmed 2017
PublisherName
American Society for Testing and Materials
Status
Current

ASTM E 2982 : 2014 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications
NASA-STD-7012A:2023 LEAK TEST REQUIREMENTS

ASTM E 1316 : 2022 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2011 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2009 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2008 : REV A Standard Terminology for Nondestructive Examinations
ASNT SNT TC 1A : 2016 TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 1316 : 2010 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2020 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2017 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2014 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2011 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2015 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2000 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2019 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2001 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2003 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2018 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2024 Standard Terminology for <?Pub Dtl?>Nondestructive Examinations
ASTM E 1316 : 2006 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV D Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 : REV A Standard Terminology for Nondestructive Examinations
ASNT CP 189 : 2016 QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL
ASTM E 1316 : 2014 : EDT 1 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2022 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2017 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2016 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2009 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2002 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2004 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2010 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2013 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV A Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2005 Standard Terminology for Nondestructive Testing
ASTM E 1316 : 2004 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2021 : REV C Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2007 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2023 : REV B Standard Terminology for Nondestructive Examinations
ASTM E 1316 : 2012 Standard Terminology for Nondestructive Examinations

View more information
US$63.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.