ASTM E 631 : 2015
Current
The latest, up-to-date edition.
Hardcopy , PDF
English
03-01-2015
This Terminology consists of terms and definitions pertaining to the subject field of buildings and building construction, and in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings.
1.1This Terminology consists of terms and definitions pertaining to the subject field of buildings and building construction, and in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings.
1.2The purpose of this Terminology is to provide preferred and admitted designations along with the meanings and explanations of technical concepts applied in the subject field of buildings and construction, written for both the non-expert and the expert user.
1.3This comprehensive Terminology standard contains all ASTM standardized definitions generated in ASTM Committee E06 that are considered general in nature. Beyond this comprehensive terminology, there are also separate terminology standards that have been developed within Committee E06 by a number of technical subcommittees.
1.3.1These separate general terminologies are created relative to specific subject fields and the terminological entries have been grouped for convenient use (see Section 2 and Appendix X1). Some terminology data contained in those other subsidiary terminology standards also appear in this comprehensive standard.
1.3.2The following standards are separate terminologies that have been developed within specific E06 Subcommittees whose term entry lists are provided in Appendix X1:
E833 | Terminology of Building Economics |
E1480 | Terminology of Facility Management (Building-Related) |
E1481 | Terminology of Railing Systems and Rails for Buildings |
E1605 | Terminology Relating to Lead in Buildings |
E1749 | Terminology Relating to Rigid Wall Relocatable Shelters |
E2110 | Terminology for Exterior Insulation and Finish Systems (EIFS) |
E2151 | Terminology of Guides for Specifying and Evaluating Performance |
E2265 | Terminology for Anchors and Fasteners in Concrete and Masonry |
1.4Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order. To show the relationships in certain families of concepts, groups of narrower terms and their definitions are grouped under the definition of the broader term. Each such sub-entry is listed also (in italics) with a cross-reference to the special class.
1.5Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right margin following the definition, and is listed in Section 2.
Committee |
E 06
|
DocumentType |
Reference Material
|
Pages |
35
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
ASTM E 1749 : 2000 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM E 1423 : 2021 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
ASTM E 1925 : 2010 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
ASTM E 1605 : 2022 | Standard Terminology Relating to Lead in Buildings |
ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
ASTM E 1775 : 2001 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM D 2864 : 2009 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1480 : 1992 : R2013 | Standard Terminology of Facility Management (Building-Related) |
ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
ASTM E 1796 : 1997 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1918 : 2021 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
ASTM E 1792 : 2001 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
ASTM E 1726 : 2001 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
ASTM E 1677 : 2019 | Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls |
ASTM E 2151 : 2002 | Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
ASTM E 1480 : 1992 : R2022 | Standard Terminology of Facility Management (Building-Related) |
ASTM E 1644 : 2021 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 1679 : 2013 : R2019 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
ASTM G 40 : 2021 | Standard Terminology Relating to Wear and Erosion |
ASTM C 859 : 2023 | Standard Terminology Relating to Nuclear Materials |
ASTM E 1186 : 2003 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
ASTM E 2151 : 2001 | Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM F 412 : 2020 : REV A | Standard Terminology Relating to Plastic Piping Systems |
ASTM E 1753 : 2001 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1480 : 1992 : R2004 | Standard Terminology of Facility Management (Building-Related) |
ASTM F 412 : 2021 | Standard Terminology Relating to Plastic Piping Systems |
ASTM E 1677 : 1995 : R2000 | Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls |
ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 96/E96M : 2022 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
ASTM D 4538 : 2005 : EDT 1 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 344 : 2018 | Terminology Relating to Thermometry and Hydrometry |
ASTM E 1645 : 2001 : R2007 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1753 : 1995 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 2271 : 2005 : REV A : R2012 : EDT 1 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities |
ASTM E 1186 : 1998 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems |
ASTM C 859 : 2014 : REV B | Standard Terminology Relating to Nuclear Materials |
ASTM E 1925 : 2004 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
ASTM E 1699 : 2000 : R2005 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
ASTM E 1423 : 1999 | Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems |
ASTM E 1699 : 2010 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects <a href="#fn00002"></a> |
ASTM D 4538 : 2005 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 2110 : 2003 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM E 1645 : 2020 : REV A | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
ASTM E 2271 : 2004 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
ASTM E 1753 : 2019 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1481 : 2000 : REV A : R2008 | Standard Terminology of Railing Systems and Rails for Buildings |
ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
ASTM E 2265 : 2009 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM E 96/E96M : 2021 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM E 1729 : 2020 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM E 1775 : 2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM E 1186 : 2003 : R2009 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
ASTM E 1554/E1554M : 2013 : R2023 | Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization |
ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM E 344 : 2001 : REV A | Terminology Relating to Thermometry and Hydrometry |
ASTM E 833 : 2014 | Standard Terminology of Building Economics |
ASTM E 1827 : 1996 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 1796 : 2003 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
ASTM E 1644 : 2004 : R2012 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
ASTM D 2864 : 2017 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
ASTM E 1979 : 2004 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1645 : 1994 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1783/E1783M : 2024 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
ASTM E 1699 : 2000 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 907 : 2015 | Standard Terminology of Adhesives |
ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
ASTM E 1726 : 2021 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1796 : 2024 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1729 : 1999 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1605 : 2001 : REV B | Standard Terminology Relating to Lead in Buildings |
ASTM E 1728 : 1999 | Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1553 : 1993 | Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002) |
ASTM E 1827 : 2011 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 1753 : 2018 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 2265 : 2017 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
ASTM E 1645 : 2016 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1645 : 2001 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1792 : 2020 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 833 : 2014 : R2021 | Standard Terminology of Building Economics |
ASTM E 96/E96M : 2023 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
ASTM E 1677 : 2011 | Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls |
ASTM E 997 : 2015 : R2021 | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
ASTM E 1727 : 2005 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014) |
ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 96/E96M : 2024 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM E 2239 : 2012 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 1753 : 2022 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1908 : 1997 | Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb) |
ASTM E 1979 : 2012 : R2016 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1753 : 2018 : REV A | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
ASTM E 1726 : 2001 : R2009 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM D 2864 : 2006 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
ASTM E 1679 : 1995 : R2012 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
ASTM E 2110 : 2017 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM E 1729 : 2004 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1908 : 2003 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 1423 : 2014 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
ASTM E 2271 : 2005 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
ASTM E 2265 : 2008 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM E 1726 : 2020 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 2239 : 2012 : R2016 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 1605 : 2000 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1645 : 2021 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1753 : 2013 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM E 1605 : 2018 | Standard Terminology Relating to Lead in Buildings |
ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
ASTM E 1605 : 2018 : REV A | Standard Terminology Relating to Lead in Buildings |
ASTM E 1908 : 2010 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM E 2265 : 2007 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM E 1613 : 1999 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
ASTM E 2110 : 2009 : EDT 1 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM E 2265 : 2006 : REV B | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1796 : 2003 : R2016 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1727 : 2020 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM E 1727 : 1999 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM E 1979 : 2017 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1605 : 2001 : REV A | Standard Terminology Relating to Lead in Buildings |
ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
ASTM D 2864 : 2010 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1728 : 2002 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 2271 : 2005 : REV A | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
ASTM E 1792 : 2002 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 96/E96M : 2016 | Standard Test Methods for Water Vapor Transmission of Materials |
ASTM D 4214 : 1998 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007) |
ASTM E 2265 : 2004 : REV A | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM E 2265 : 2004 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM C 859 : 2022 | Standard Terminology Relating to Nuclear Materials |
ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
ASTM E 1729 : 2005 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014) |
ASTM E 1979 : 2012 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1796 : 2020 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM D 2864 : 2002 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM C 859 : 2022 : REV A | Standard Terminology Relating to Nuclear Materials |
ASTM D 2864 : 2000 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
ASTM E 1749 : 2005 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM E 1783/E1783M : 1996 : R2017 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
ASTM E 1605 : 2003 : EDT 1 | Standard Terminology Relating to Lead in Buildings |
ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
ASTM E 1925 : 2018 | Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
ASTM E 1480 : 1992 : R1998 : EDT 1 | Standard Terminology of Facility Management (Building-Related) |
ASTM E 1728 : 2010 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1679 : 1995 : R1999 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
ASTM D 4214 : 2007 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
ASTM E 2265 : 2003 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
ASTM E 1481 : 2000 : REV A : R2014 : EDT 1 | Standard Terminology of Railing Systems and Rails for Buildings |
ASTM D 2864 : 2021 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1729 : 2024 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
ASTM E 1481 : 2000 : REV A : R2021 | Standard Terminology of Railing Systems and Rails for Buildings |
ASTM E 1918 : 2016 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
ASTM E 1827 : 2011 : R2017 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 73 : 2013 : R2021 | Standard Practice for Static Load Testing of Truss Assemblies |
ASTM E 1918 : 2006 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
ASTM E 1679 : 1995 : R2005 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
ASTM E 1979 : 2021 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1775 : 2007 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM G 40 : 2022 | Standard Terminology Relating to Wear and Erosion |
ASTM D 4538 : 2021 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM D 4538 : 2013 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
ASTM E 1605 : 2003 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1613 : 2004 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
ASTM E 1677 : 2023 | Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls |
ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1925 : 2001 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
ASTM G 40 : 2022 : REV A | Standard Terminology Relating to Wear and Erosion |
ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
ASTM E 2239 : 2003 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM D 2864 : 2010 : EDT 1 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1792 : 2001 : EDT 1 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1334 : 1995 : R2005 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
ASTM E 1186 : 2017 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
ASTM E 1827 : 2022 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 1677 : 2005 | Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls |
ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 1827 : 1996 : R2002 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
ASTM E 2110 : 2011 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
ASTM E 1749 : 2010 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
ASTM E 1644 : 2004 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
ASTM E 1828 : 2001 | Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010) |
ASTM E 1727 : 2004 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM E 73 : 1983 : R1996 : EDT 1 | Standard Practice for Static Load Testing of Truss Assemblies |
ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
ASTM D 2864 : 2019 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1979 : 1998 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
ASTM E 1775 : 1996 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM E 73 : 2013 | Standard Practice for Static Load Testing of Truss Assemblies |
ASTM E 2239 : 2004 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 1644 : 1998 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM E 997 : 2015 | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM E 1828 : 1996 | Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint |
ASTM E 1423 : 2006 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
ASTM D 4538 : 1995 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
ASTM E 1679 : 2013 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
ASTM E 1775 : 2007 : R2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
ASTM D 2864 : 2007 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1727 : 2024 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM E 1792 : 1996 : REV A | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1699 : 2014 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
ASTM E 1605 : 2001 | Standard Terminology Relating to Lead in Buildings |
ASTM E 2265 : 2005 : REV A | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
ASTM E 1726 : 1995 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
ASTM G 40 : 2017 | Standard Terminology Relating to Wear and Erosion |
ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
ASTM E 1644 : 2004 : R2016 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
ASTM E 1481 : 2000 : REV A | Standard Terminology of Railing Systems and Rails for Buildings |
ASTM E 2110 : 2000 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
ASTM E 1753 : 2004 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
ASTM D 2864 : 2020 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 2265 : 2006 : REV A | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
ASTM E 2271 : 2003 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
ASTM E 1605 : 2002 | Standard Terminology Relating to Lead in Buildings |
ASTM E 1827 : 1996 : R2007 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
ASTM E 1728 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
ASTM E 1918 : 1997 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field (Withdrawn 2006) |
ASTM E 1918 : 2006 : R2015 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
ASTM E 1699 : 2013 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
ASTM E 2151 : 2002 : R2010 | Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings (Withdrawn 2019) |
ASTM E 1792 : 2024 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
ASTM E 1334 : 1995 : R1999 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
ASTM E 1796 : 2003 : R2011 : EDT 1 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
ASTM E 1925 : 1999 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
ASTM E 1908 : 2016 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
ASTM D 2864 : 2017 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM E 1645 : 2001 : R2016 : EDT 1 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
ASTM E 1186 : 2022 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
ASTM E 2239 : 2002 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
ASTM E 997 : 1984 : R1992 : EDT 1 | Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods |
ASTM D 2864 : 2021 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.