ASTM E 805 : 2012 : REV A : R2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
Available format(s)
Hardcopy , PDF
Superseded date
06-30-2022
Language(s)
English
Published date
05-26-2017
CONTAINED IN VOL. 06.01, 2018 Specifies the documentation of instrumental measurement of color or color difference for current communication or for future reference.
1.1This practice covers the documentation of instrumental measurement of color or color difference for current communication or for future reference. The practice is applicable to instrumental measurements of materials where color is seen by reflected, transmitted or emitted light and any combinations of one or more of these processes. The practice is recommended for documentation of methodology in interlaboratory color-measurement programs.
1.2Providing an adequate identification of an instrumental measure of color or color-difference involves documenting the metadata necessary for archiving and future use of the measurement data collected. The metadata can be divided in five parts:
1.2.1Nature and source of available samples and the form of specimens actually measured,
1.2.2Instrumental conditions of measurement, including instrument geometrical and spectral conditions of measurement,
1.2.3Standards used,
1.2.4Data acquisition procedure, and
1.2.5Color scales employed.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| Committee |
E 12
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| ProductNote |
Reconfirmed 2017
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 5531 : 2017 | Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM E 313 : 2020 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
| ASTM D 2454 : 2018 | Standard Practice for Determining the Effect of Overbaking on Organic Coatings |
| ASTM E 2194 : 2014 : R2021 | Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM D 3134 : 2015 : R2019 | Standard Practice for Establishing Color and Gloss Tolerances |
| ASTM D 4726 : 2018 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors |
| ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 2539 : 2014 : R2021 | Standard Test Method for Multiangle Color Measurement of Interference Pigments |
| ASTM D 7195 : 2021 | Standard Guide for Setting Object Color Specifications |
| ASTM C 1510 : 2001 : R2020 | Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry |
| ASTM E 1348 : 1990 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1708 : 2020 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 2194 : 2012 | Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM D 6166 : 2008 | Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color) |
| ASTM D 1535 : 2007 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 6166 : 2012 | Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color) |
| ASTM E 1331 : 1996 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1331 : 2015 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 1544 : 1998 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
| ASTM E 1347 : 2006 : R2020 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 2194 : 2014 : R2021 | Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM E 1708 : 1995 : R2007 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 2152 : 2012 | Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data |
| ASTM E 1247 : 1992 : R2000 | Standard Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1767 : 1995 | Standard Practice for Specifying the Geometry of Observations and Measurements to Characterize the Appearance of Materials (Withdrawn 2004) |
| ASTM E 1164 : 2007 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 1209 : 2000 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM E 259 : 1998 | Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical Geometry and Bi-Directional Geometries |
| ASTM E 2194 : 2009 | Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM D 5386 : 2004 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 1535 : 2012 : REV A | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1708 : 2014 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 2729 : 2016 : R2021 | Standard Practice for Rectification of Spectrophotometric Bandpass Differences |
| ASTM E 1348 : 2011 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1345 : 1998 : R2008 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 2729 : 2009 | Standard Practice for Rectification of Spectrophotometric Bandpass Differences |
| ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1500 : 2004 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 1347 : 2006 : R2015 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM E 1247 : 2003 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry (Withdrawn 2012) |
| ASTM E 1708 : 1995 : R2001 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 1164 : 2009 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 2175 : 2001 | Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers |
| DIN 6176:2001-03 | COLORIMETRIC EVALUATION OF COLOUR DIFFERENCES OF SURFACE COLOURS ACCORDING TO DIN99-FORMULA |
| ASTM D 1535 : 2013 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1347 : 2003 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM D 1500 : 2012 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1544 : 2004 : R2018 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
| ASTM E 2175 : 2001 : R2013 | Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers |
| ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1247 : 2012 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ASTM E 1708 : 2014 : R2019 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 1535 : 1968 | Standard Method Of Specifying Color By The Munsell System |
| ASTM D 6166 : 2012 : R2016 | Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color) |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1767 : 2011 : R2017 | Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials |
| ASTM E 1347 : 1997 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM E 1247 : 2012 : R2017 | Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry |
| ASTM D 1500 : 2003 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 1500 : 1982 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 1349 : 2006 : R2013 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 1535 : 2008 : EDT 1 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1500 : 2002 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 2152 : 2001 | Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data |
| ASTM E 1345 : 1998 : R2014 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1348 : 1990 : R1996 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 2729 : 2009 : R2015 | Standard Practice for Rectification of Spectrophotometric Bandpass Differences |
| ASTM E 2153 : 2001 : R2017 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM E 1347 : 2006 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1500 : 1998 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 2175 : 2001 : R2021 | Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers |
| ASTM D 1500 : 2012 : R2017 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 1348 : 2015 : EDT 1 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 2153 : 2001 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM D 1535 : 2014 : R2018 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 1535 : 2014 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 1348 : 2002 : R2007 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1331 : 2004 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1164 : 2012 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 1209 : 2005 : EDT 1 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 1535 : 2008 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1164 : 1994 | Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation |
| ASTM E 2194 : 2014 : R2017 | Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM E 1345 : 1998 : R2019 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 5386 : 2005 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 991 : 2016 | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM E 1349 : 1990 : R1998 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
| ASTM E 2153 : 2001 : R2006 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM E 1349 : 2006 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry |
| ASTM D 1535 : 1997 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 2175 : 2001 : R2008 | Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers |
| ASTM E 1767 : 2011 | Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials |
| ASTM E 991 : 2016 : REDLINE | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM D 1535 : 1989 | Standard Test Method for Specifying Color by the Munsell System |
| ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM E 2152 : 2001 : R2006 | Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data |
| ASTM D 5386 : 1993 : REV B : R2000 : EDT 1 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 2729 : 2016 : REDLINE | Standard Practice for Rectification of Spectrophotometric Bandpass Differences |
| ASTM E 2194 : 2003 | Standard Practice for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM D 1544 : 2004 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
| ASTM E 1708 : 1995 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM D 5386 : 2016 : REDLINE | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 1347 : 2006 : R2011 | Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry |
| ASTM D 1535 : 2000 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 313 : 1998 | Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates |
| ASTM E 1164 : 2002 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1331 : 2009 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1164 : 2012 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM D 1209 : 2005 : R2011 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 5386 : 2016 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 179 : 2017 : REDLINE | Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials |
| ASTM D 1544 : 2004 : R2010 | Standard Test Method for Color of Transparent Liquids (Gardner Color Scale) |
| ASTM D 1535 : 2012 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 1708 : 2019 | Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 1345 : 1998 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1767 : 2004 | Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials |
| ASTM E 2153 : 2001 : R2011 | Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color |
| ASTM E 1331 : 2015 : R2019 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1348:2002 | Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 991 : 2021 | Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method |
| ASTM D 6166 : 1997 | Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color) |
| ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 1500 : 2004 : REV A | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
| ASTM D 1500 : 2007 | Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale) |
| ASTM E 1345 : 1998 : R2008 : EDT 1 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM D 1209 : 2005 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
| ASTM D 1535 : 2006 | Standard Practice for Specifying Color by the Munsell System |
| ASTM D 1535 : 2001 | Standard Practice for Specifying Color by the Munsell System |
| ASTM E 2729 : 2016 | Standard Practice for Rectification of Spectrophotometric Bandpass Differences |
| ASTM E 2194 : 2014 | Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials |
| ASTM E 1349 : 2006 : R2018 | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry |
| ASTM D 5386 : 2010 | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM E 1164 : 2012 : R2017 : EDT 1 | Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation |
| ASTM E 1331 : 2015 : REDLINE | Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1345 : 1998 : R2003 | Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 2152 : 2012 : R2017 | Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data |
| ASTM D 1209 : 2005 : R2019 | Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale) |
US$75.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.