ASTM F 2408 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
02-24-2023
English
01-22-2016
1.1This specification establishes the minimum requirements for coated tubular picket ornamental fence systems fabricated from galvanized steel components.
1.2The requirements of this specification do not apply to vertical bar fence systems utilizing solid bar or wrought iron materials.
1.3The values stated with in-pound units are to be regarded as standard. The SI values in parentheses are provided for information.
Committee |
F 14
|
DocumentType |
Standard
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ASTM F 2814 : 2009 : R2015 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
ASTM F 2698 : 2008 : R2018 | Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities |
ASTM F 2699 : 2008 : R2018 | Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas |
ASTM A 653/A653M : 2001 : REV A | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
ASTM A 1008/A1008M : 2020 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM D 3359 : 2009 : EDT 2 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 2244 : 2021 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM A 1008/A1008M : 2021 | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM A 653/A653M : 2022 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
ASTM D 3359 : 1997 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2794 : 1992 | Standard Test Method for Resistence of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 1654 : 2005 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM A 653/A653M : 2020 | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process |
ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM F 2814 : 2009 : R2015 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
ASTM A 1008/A1008M : 2021 : REV A | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable |
ASTM D 3359 : 2009 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 3359 : 2022 | Standard Test Methods for Rating Adhesion by Tape Test |
ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 3359 : 2002 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 3359 : 2009 : EDT 1 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 2794 : 1993 : R1999 : EDT 1 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2794 : 1993 : R2004 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 3359 : 2007 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 1654 : 2008 : R2016 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 2022 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 1654 : 1992 : R2000 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM D 3359 : 2008 | Standard Test Methods for Measuring Adhesion by Tape Test |
ASTM D 2794 : 1993 : R2019 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM D 1654 : 2008 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM D 1654 : 2008 : R2016 : EDT 1 | Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments |
ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
ASTM A 239 : 2014 : R2019 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
ASTM D 2794 : 1993 : R2010 | Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) |
ASTM A 239 : 2021 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles |
ASTM D 3359 : 2017 | Standard Test Methods for Rating Adhesion by Tape Test |
ASTM F 2814 : 2009 | Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.