• There are no items in your cart

ASTM F 2789 : 2010 : R2015

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
Available format(s)

Hardcopy , PDF

Superseded date

08-25-2020

Language(s)

English

Published date

05-01-2015

CONTAINED IN VOL. 13.01, 2015 Specifies various forms of nucleus replacement and nucleus augmentation devices.

1.1This guide describes various forms of nucleus replacement and nucleus augmentation devices. It further outlines the types of testing that are recommended in evaluating the performance of these devices.

1.2Biocompatibility of the materials used in a nucleus replacement device is not addressed in this guide. However, users should investigate the biocompatibility of their device separately (see X1.1).

1.3While it is understood that expulsion and endplate fractures represent documented clinical failures, this guide does not specifically address them, although some of the factors that relate to expulsion have been included (see X1.3).

1.4Multiple tests are described in this guide; however, the user need not use them all. It is the responsibility of the user of this guide to determine which tests are appropriate for the devices being tested and their potential application. Some tests may not be applicable for all types of devices. Moreover, some nucleus devices may not be stable in all test configurations. However, this does not necessarily mean that the test methods described are unsuitable.

1.5The science of nucleus device design is still very young and includes technology that is changing more quickly than this guide can be modified. Therefore, the user must carefully consider the applicability of this guide to the user’s particular device; the guide may not be appropriate for every device. For example, at the time of publication, this guide does not address the nucleus replacement and nucleus augmentation devices that are designed to be partially or completely resorbable in the body. However, some of the test recommended in this guide may be applicable to evaluate such devices. It has not been demonstrated that mechanical failure of nucleus devices is related to adverse clinical results. Therefore this standard should be used with care in evaluating proposed nucleus devices.

1.6This guide is not intended to be a performance standard. It is the responsibility of the user of this guide to characterize the safety and effectiveness of the nucleus device under evaluation.

1.7The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. Angular measurements may be reported in either degrees or radians.

1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
F 04
DocumentType
Guide
Pages
10
ProductNote
Reconfirmed 2015
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

ASTM F 3292 : 2019 Standard Practice for Inspection of Spinal Implants Undergoing Testing

ASTM F 1877 : 2016 : REDLINE Standard Practice for Characterization of Particles
ASTM F 1980 : 2007 : R2011 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
ASTM E 328 : 2013 : REDLINE Standard Test Methods for Stress Relaxation Tests for Materials and Structures
ASTM F 1877 : 2005 Standard Practice for Characterization of Particles
ASTM F 1582 : 1998 : R2016 Standard Terminology Relating to Spinal Implants
ASTM F 2267 : 2004 Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
ASTM D 6204 : 2004 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM E 1823 : 2012 : REV : EDT 0 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1823 : 2007 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 561 : 2013 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
ASTM F 1714 : 1996 : R2008 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
ASTM E 1823 : 2009 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 2423 : 2005 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ISO 18192-1:2011 Implants for surgery Wear of total intervertebral spinal disc prostheses Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test
ASTM F 1980 : 2007 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
ASTM F 1582 : 1998 : R2003 Standard Terminology Relating to Spinal Implants
ASTM D 2990 : 2017 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM F 2267 : 2004 : R2011 Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F 2267 : 2003 Standard Test Method for Measuring Load Induced Subsidence of an Intervertebral Body Fusion Device Under Static Axial Compression
ASTM F 1980 : 2016 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
ASTM F 2346 : 2018 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM D 6204 : 2019 : REV A Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D 2990 : 2001 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM E 1823 : 2005 : REV A : EDT 1 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 2346 : 2005 : R2011 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM E 1823 : 2010 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1823 : 2009 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM D 6204 : 2019 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM F 2423 : 2011 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ASTM F 1714 : 1996 : R2002 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices
ASTM E 1823 : 2012 : REV D Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 1714 : 1996 : R2013 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
ASTM E 1823 : 2012 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 132 : 2017 : REDLINE Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM D 2990 : 2009 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D 2990 : 1995 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D 6204 : 2001 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM F 2423 : 2011 : R2016 Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
ASTM D 6204 : 2005 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM F 1582 : 1998 : R2011 Standard Terminology Relating to Spinal Implants
ASTM E 1823 : 1996 : R2002 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1823 : 1996 : EDT 1 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1823 : 2012 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 1877 : 2016 Standard Practice for Characterization of Particles
ASTM F 1714 : 1996 : R2018 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
ASTM E 1823 : 2007 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM D 6204 : 2007 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM E 111 : 2017 : REDLINE Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM F 1877 : 1998 Standard Practice for Characterization of Particles
ASTM F 1980 : 1999 : EDT 1 Standard Guide for Accelerated Aging of Sterile Medical Device Packages
ASTM F 1980 : 2016 : REDLINE Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
ASTM F 1714 : 1996 Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices
ASTM F 1877 : 2005 : R2010 Standard Practice for Characterization of Particles
ASTM F 1877 : 2005 : EDT 1 Standard Practice for Characterization of Particles
ASTM D 6204 : 2012 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM E 1823 : 2013 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM D 2990 : 2017 : REDLINE Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D 6204 : 1999 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM E 1823 : 2012 : REV C Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 2346 : 2005 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
ASTM F 1980 : 2002 Standard Guide for Accelerated Aging of Sterile Medical Device Packages
ASTM E 1823 : 2005 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 1582 : 1998 Standard Terminology Relating to Spinal Implants
ASTM E 1823 : 2011 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM F 2267 : 2004 : R2018 Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
ASTM D 6204 : 2015 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.