• There are no items in your cart

ASTM F 3122 : 2014

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes
Available format(s)

Hardcopy , PDF

Superseded date

04-29-2022

Language(s)

English

Published date

12-08-2014

This standard serves as a guide to existing standards or variations of existing standards that may be applicable to determine specific mechanical properties of materials made with an additive manufacturing process.

1.1This standard serves as a guide to existing standards or variations of existing standards that may be applicable to determine specific mechanical properties of materials made with an additive manufacturing process.

1.2As noted in many of these referenced standards, there are several factors that may influence the reported properties, including material, material anisotropy, method of material preparation, porosity, method of specimen preparation, testing environment, specimen alignment and gripping, testing speed, and testing temperature. These factors should be recorded, to the extent that they are known, according to Practice F2971 and the guidelines of the referenced standards.

1.3The following standards are not referred to directly in the guide but also have information that may be useful in the testing of metal test specimens made via additive manufacturing: A370, A1058, B211, B348, B557, B565, B724, B769, E3, E6, E7, E290, E467, E468, E837, E915, E1049,E1823, E1942.

1.4Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard.

1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Committee
F 42
DocumentType
Guide
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy

ASTM F 3213 : 2017 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion
15/30333838 DC : 0 BS ISO/ASTM 52901 - ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS
ISO/ASTM 52901:2017 Additive manufacturing — General principles — Requirements for purchased AM parts
BS ISO/ASTM 52901 : 2017 ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - REQUIREMENTS FOR PURCHASED AM PARTS
NF ISO/ASTM 52901 : 2018 ADDITIVE MANUFACTURING - PARTS MADE BY ADDITIVE MANUFACTURING
ASTM F 3303 : 2018 Standard for Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications
ASTM F 3302 : 2018 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion
ASTM F 3184 : 2016 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion

ASTM E 1820 : 2013 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2009 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1049 : 1985 : R2017 Standard Practices for Cycle Counting in Fatigue Analysis
ASTM E 2472 : 2012 : EDT 1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM B 909 : 2017 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM E 1942 : 1998 : R2010 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM A 370 : 2021 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM F 2971 : 2013 Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
ASTM A 1058 : 2014 Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM E 1876 : 2009 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E 1457 : 2007 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E 1876 : 2001 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E 2472 : 2012 : R2018 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E 647 : 1995 Standard Test Method for Measurement of Fatigue Crack Growth Rates
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ASTM E 1875 : 2020 : REV A Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM E 143 : 2013 Standard Test Method for Shear Modulus at Room Temperature
ASTM E 1457 : 2015 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E 8/E8M : 2016 : REV A : EDT 1 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 1457 : 2007 : EDT 2 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E 1681: 2003 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM A 1058 : 2012 : REV A Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM E 7 : 2017 : REDLINE Standard Terminology Relating to Metallography
ASTM E 1681 : 2003 : R2008 : EDT 1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 1823 : 2012 : REV : EDT 0 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 2760 : 2010 : EDT 2 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 1823 : 2007 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1876 : 2021 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E 1049 : 1985 : R2011 : EDT 1 Standard Practices for Cycle Counting in Fatigue Analysis
ASTM E 1820 : 2021 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1681 : 2003 : R2008 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 1290 : 2002 : EDT 1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E 1457 : 2015 : REDLINE Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM B 348 : 2013 : REDLINE Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM E 2714 : 2009 : EDT 1 Standard Test Method for Creep-Fatigue Testing
ASTM E 1820 : 2011 : EDT 2 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1450 : 2016 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM F 2792 : 2010 Standard Terminology for Additive Manufacturing Technologies
ISO 14556:2015 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ASTM E 606 : 1992 : R1998 Standard Practice for Strain-Controlled Fatigue Testing
ASTM E 8/E8M : 2021 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E 468 : 1990 : R2004 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
ASTM E 1304 : 1997 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 1457 : 2000 Standard Test Method for Measurement of Creep Crack Growth Rates in Metals
ASTM B 348 : 2005 : EDT 1 Standard Specification for Titanium and Titanium Alloy Bars and Billets
ASTM E 915 : 2016 : REDLINE Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E 2714 : 2013 : REDLINE Standard Test Method for Creep-Fatigue Testing
ASTM F 2971 : 2013 : R2021 Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
ASTM E 1820 : 2020 Standard Test Method for Measurement of Fracture Toughness
ISO/TR 29381:2008 Metallic materials Measurement of mechanical properties by an instrumented indentation test Indentation tensile properties
ISO/ASTM 52921:2013 Standard terminology for additive manufacturing — Coordinate systems and test methodologies
ASTM E 1823 : 2009 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 2789 : 2010 : R2021 Standard Guide for Fretting Fatigue Testing
ASTM B 909 : 2021 : REV A Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM E 2368 : 2010 : R2017 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 1221 : 2006 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K<sub>Ia</sub>, of Ferritic Steels
ASTM E 10 : 2001 Standard Test Method for Brinell Hardness of Metallic Materials
ASTM E 1457 : 2007 : EDT 4 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E 1875 : 2000 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM E 21 : 2020 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
ASTM E 1681 : 2003 : R2013 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 1875 : 2013 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM B 211 : 1999 Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire
ASTM E 915 : 2019 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ISO 12106:2017 Metallic materials — Fatigue testing — Axial-strain-controlled method
ASTM E 466 : 2015 : REDLINE Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 384 : 2017 : REDLINE Standard Test Method for Microindentation Hardness of Materials
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ASTM F 2792 : 2009 : EDT 1 Standard Terminology for Additive Manufacturing Technologies
ASTM E 1820 : 2011 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 6 : 2002 Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 1820 : 2006 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1942 : 1998 : EDT 1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM E 1450 : 2003 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM B 909 : 2017 : REDLINE Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ASTM A 1058 : 2008 Standard Test Methods for Mechanical Testing of Steel Products<span class='unicode'>—</span>Metric
ASTM E 466 : 1996 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 1457 : 2007 : EDT 1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ASTM E 1820 : 2018 Standard Test Method for Measurement of Fracture Toughness
ASTM E 399 : 2020 : REV A Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
ASTM E 1820 : 2011 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1304 : 1997 : R2014 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 2368 : 2004 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 1875 : 2020 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ISO 11531:2015 Metallic materials — Sheet and strip — Earing test
ASTM E 2368 : 2004 : EDT 1 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM B 557 : 2015 : REDLINE Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM E 1820 : 2008 : REV A Standard Test Method for Measurement of Fracture Toughness
AS ISO/ASTM 52910:2020 Additive manufacturing - Design - Requirements, guidelines and recommendations
ASTM E 1457 : 2007 : EDT 3 Standard Test Method for Measurement of Creep Crack Growth Times in Metals
ISO 12737:2010 Metallic materials Determination of plane-strain fracture toughness
ASTM E 10 : 2017-05 TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS
ASTM E 1049 : 1985 : R2005 Standard Practices for Cycle Counting in Fatigue Analysis
ASTM E 1450 : 2009 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1221 : 2012 : REV A : R2018 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels
ASTM E 915 : 2021 Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement
ASTM E 1681 : 2003 : R2008 : EDT 2 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 1876 : 2007 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E 1304 : 1997 : R2014 : EDT 1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 1304 : 1997 : R2020 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 1820 : 2017 Standard Test Method for Measurement of Fracture Toughness
ISO 22889:2013 Metallic materials Method of test for the determination of resistance to stable crack extension using specimens of low constraint
ISO 15579:2000 Metallic materials Tensile testing at low temperature
ASTM E 2760 : 2010 : EDT 1 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 1820 : 2020 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1823 : 2005 : REV A : EDT 1 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1304 : 1997 : R2002 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 1876 : 2015 : REDLINE Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM B 646 : 2017 : REDLINE Standard Practice for Fracture Toughness Testing of Aluminum Alloys
ASTM E 2760 : 2010 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 1823 : 2010 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1304 : 1997 : R2008 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 1823 : 2021 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1681 : 2003 : R2013 : EDT 1 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ISO 3452-1:2013 Non-destructive testing Penetrant testing Part 1: General principles
ASTM E 1450 : 1992 : R1998 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM A 370 : 2020 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1875 : 2013 : REDLINE Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM E 1876 : 2015 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM A 1058 : 2012 Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM A 1058 : 2012 : REV B Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM E 740 : 2003 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM B 645 : 2010 : R2015 Standard Practice for Linear-Elastic Plane–Strain Fracture Toughness Testing of Aluminum Alloys
ASTM E 9 : 2009 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM E 1823 : 2009 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1457 : 2013 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals
ISO 19819:2004 Metallic materials Tensile testing in liquid helium
ASTM E 2472 : 2006 : EDT 1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E 2714 : 2009 Standard Test Method for Creep-Fatigue Testing
ASTM E 1820 : 2017 : REV A Standard Test Method for Measurement of Fracture Toughness
ISO 12111:2011 Metallic materials — Fatigue testing — Strain-controlled thermomechanical fatigue testing method
ASTM E 1221 : 2010 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K<sub>Ia</sub>, of Ferritic Steels
ASTM F 2792 : 2012 Standard Terminology for Additive Manufacturing Technologies<sup>,</sup>
ASTM E 1820 : 2005 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1823 : 2012 : REV D Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1823 : 2012 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 132 : 2017 : REDLINE Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM E 1290 : 2008 : EDT 1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement (Withdrawn 2013)
ASTM E 238 : 1984 : R1996 Standard Test Method for Pin-Type Bearing Test of Metallic Materials
ASTM E 2472 : 2012 : R2018 : EDT 1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E 143 : 2013 : REDLINE Standard Test Method for Shear Modulus at Room Temperature
ISO 3369:2006 Impermeable sintered metal materials and hardmetals Determination of density
ASTM E 466 : 2021 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 23 : 2002 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
ASTM E 1820 : 2015 Standard Test Method for Measurement of Fracture Toughness
ASTM E 466 : 2015 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
ASTM E 1820 : 2020 : REV B Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2018 : REV A : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ISO 26203-2:2011 Metallic materials — Tensile testing at high strain rates — Part 2: Servo-hydraulic and other test systems
ASTM E 1820 : 2020 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 2714 : 2013 : R2020 Standard Test Method for Creep-Fatigue Testing
ASTM E 2760 : 2016 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 6 : 2015 : EDT 3 Standard Terminology Relating to Methods of Mechanical Testing
ASTM F 2792 : 2010 : EDT 1 Standard Terminology for Additive Manufacturing Technologies
ASTM E 915 : 1996 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E 1876 : 2000 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ISO 148-3:2016 Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ASTM E 1942 : 1998 : R2018 : EDT 1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM F 2792 : 2012 : REV A Standard Terminology for Additive Manufacturing Technologies<sup>,</sup> (Withdrawn 2015)
ASTM E 1290 : 2002 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E 1820 : 2006 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1221 : 2012 : REV A : R2018 : EDT 1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels
ISO 12108:2012 Metallic materials Fatigue testing Fatigue crack growth method
ASTM E 1304 : 1997 : R2008 : EDT 1 Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
ASTM E 1290 : 1999 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM A 370 : 2011 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM E 1290 : 2008 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E 1823 : 1996 : R2002 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1823 : 1996 : EDT 1 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM B 645 : 1998 Standard Practice for Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM E 1875 : 2000 : EDT 1 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ASTM E 2760 : 2019 Standard Test Method for Creep-Fatigue Crack Growth Testing
ASTM E 467 : 2008 : R2014 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM E 1823 : 2012 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 9 : 1989 : REV A : R1995 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
ASTM B 557 : 1994 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
ASTM B 909 : 2021 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
ISO 12135:2016 Metallic materials Unified method of test for the determination of quasistatic fracture toughness
ASTM E 1823 : 2007 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 837 : 2020 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
ISO 1143:2010 Metallic materials Rotating bar bending fatigue testing
ASTM E 111 : 2017 : REDLINE Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
ASTM E 2472 : 2012 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E 1820 : 2015 : REV A : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 6 : 2015 : EDT 4 : REDLINE Standard Terminology Relating to Methods of Mechanical Testing
ASTM E 2760 : 2016 : REDLINE Standard Test Method for Creep-Fatigue Crack Growth Testing
ISO 6892-2:2011 Metallic materials Tensile testing Part 2: Method of test at elevated temperature
ASTM E 1820 : 2018 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM F 2792 : 2009 Standard Terminology for Additive Manufacturing Technologies
ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
ISO 1352:2011 Metallic materials Torque-controlled fatigue testing
ASTM E 384 : 2017 Standard Test Method for Microindentation Hardness of Materials
ASTM E 1820 : 2016 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1875 : 2008 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
ISO/TR 14936:1998 Metallic materials Strain analysis report
ASTM E 1221 : 2012 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels
ASTM E 290 : 2014 : REDLINE Standard Test Methods for Bend Testing of Material for Ductility
ASTM E 1681 : 1999 : EDT 1 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 2789 : 2010 Standard Guide for Fretting Fatigue Testing
ASTM A 1058 : 2009 Standard Test Methods for Mechanical Testing of Steel Products<char: emdash>Metric
ASTM E 1876 : 1999 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM B 769 : 2011 : R2021 Standard Test Method for Shear Testing of Aluminum Alloys
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
ASTM E 1820 : 1999 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2001 Standard Test Method for Measurement of Fracture Toughness
ASTM E 2789 : 2010 : R2015 Standard Guide for Fretting Fatigue Testing
ASTM B 645 : 2021 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM E 2714 : 2013 Standard Test Method for Creep-Fatigue Testing
ISO 26203-1:2010 Metallic materials Tensile testing at high strain rates Part 1: Elastic-bar-type systems
ASTM E 1876 : 2001 : R2006 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
ASTM E 1820 : 2013 : EDT 1 Standard Test Method for Measurement of Fracture Toughness
ASTM E 1820 : 2015 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 143 : 2020 Standard Test Method for Shear Modulus at Room Temperature
ASTM E 467 : 2021 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
ASTM E 1450 : 2016 : REDLINE Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1823 : 2013 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1942 : 1998 : R2010 : EDT 1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM E 1820 : 2009 Standard Test Method for Measurement of Fracture Toughness
ASTM E 2368 : 2010 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
ASTM E 1820 : 2005 : REV A Standard Test Method for Measurement of Fracture Toughness
ASTM E 1450 : 1992 : R1998 : EDT 1 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium
ASTM E 1221 : 2012 : REV A Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, <emph type="bdit">K<inf>Ia</inf></emph>, of Ferritic Steels
ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
ASTM E 1823 : 2012 : REV C Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 448 : 1982 : R2002 Standard Practice for Scleroscope Hardness Testing of Metallic Materials
ASTM E 1823 : 2020 : REV B Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1221 : 1996 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K<sub>Ia</sub>, of Ferritic Steels
ISO 27306:2016 Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components
ASTM E 1290 : 2007 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E 8/E8M : 2016-09 TEST METHODS FOR TENSION TESTING OF METALLIC MATERIALS
ASTM E 1823 : 2005 : REV A Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 2472 : 2006 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
ASTM E 1049 : 1985 : R1997 Standard Practices for Cycle Counting in Fatigue Analysis
ASTM A 1058 : 2014 : REDLINE Standard Test Methods for Mechanical Testing of Steel Products—Metric
ASTM E 1823 : 2011 Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E 1942 : 1998 : R2004 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
ASTM B 769 : 2011 : R2016 Standard Test Method for Shear Testing of Aluminum Alloys
EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016)

View more information
US$75.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.